片语

positive output terminal torque正极输出线接线柱扭矩

output axle torque输出轴扭矩

output torque requirement所需的输出扭矩

output shaft torque输出轴转矩

Specification and Output Torque技术参数

Run-time output maximum torque运行时输出最大扭矩

automatic trasmission output shaft torque自动变速箱输出轴扭矩

Output brake torque check输出轴制动力矩检查

High output torque高输出扭矩

英汉例句

• for high performance motor drive systems, that is important to achieve maximum output torque and under any operating conditions, and to extend the field weakening range of the motor.

  在高性能的电机驱动系统中，重要的是在一定的条件下常为获得最大的输出转矩和直流电压利用率，来扩大弱磁范围。

• in addition, the adjustment screw is not synchronized gear makes contact, at the same time pass on half of the output torque driven screw.

  此外，调整同步齿轮使得螺桿不接触，同时将输出扭矩的一半传给从动螺桿。

• a maximum output torque is reduced if the actual temperature differences exceed the expected temperature differences.

  如果实际温度差超过预期温度差则减小最大输出扭矩。

• the torque rack on the ar series produces the rotary output torque while the control rack determines rotary stroke.

  关于ar系列扭矩架旋转产生输出扭矩，同时控制旋转机架确定中风。

• from this, a conclusion can be got: at lower revolving speed, output torque is linear to current limit approximately;

  研究及试验结果表明：在低转速下，系统输出转矩与电流限幅值基本上成线性关系；

• at the same time, experimental test of samples show at its output torque increases 80% in contrast with the same type motor.

  同时，通过对这种电机的样机进行实验检测，输出转矩较同型号超声波电机增加80%，表明该电机具有实际生产价值和广阔的应用前景。

• the effects of structure, gap magnetic field, rotor thickness, magnetic pole numbers of rotor and winding layers of stator of the micromotor on it's output torque are discussed in detail.

  从微马达结构、气隙磁场、转子厚度、转子写入磁极数和定子绕组的层数对微马达输出力矩的影响进行了分析和讨论。

• an approach to measure friction of ac servo motion control system by measuring the output torque was proposed.

  提出了一种通过测量交流伺服电机输出扭矩间接测量摩擦的方法。

• strong plus pressure, strong elevation force, large output torque and strong drilling capacity can satisfy the demand for deep hole drilling.

  加压力大、提拔力大、输出扭矩大，鉆探能力强，能满足深孔鉆探的需要。

• the paper checks if the output torque of the single motor can meet the requirement of recoiling tension in this working condition.

  本文针对这种情况校核单台电机的输出力矩是否能够满足卷取张力的要求。

• the engine output torque model and oil consumption model are given in numerical table by cubic spline interpolation to fit engine test result.

  文中通过对现有的发动机实验数据进行数值拟合，以数表的形式给出了发动机的输出转矩模型、油耗模型。

• by optimization design on the configuration and electromagnetism parameters, the output torque can be effectively enhanced with lower moment of inertia and faster response characteristics.

  通过合理设计电机的结构参数和电磁参数，可有效提高电机输出转矩，降低转动惯量，提高电机响应特性。

• in addition, the adjustment of the synchronous gear makes the screw does not contact, at the same time the output torque of the half to driven screw.

  此外，调整同步齿轮使得螺桿不接触，同时将输出扭矩的一半传给从动螺桿。

• it is a speed and power-changing device to transfer the output torque of the engine to the driving wheels.

  这是一种速度和力量变化的设备转移输出扭矩的引擎来驱动车轮。

• output torque of the actuator must meet or exceed the operating torque requirements of the specific valve to be actuated.

  执行机构的输出扭矩必须满足或超过所应用阀门所需的操作扭矩要求。

• when the frequency of cp pulses is high, average voltages and currents of windings will increase and output torque will enlarge accordingly. it effectively improve high-frequency running property.

  当cp脉沖为高频时，各相绕组平均电压和平均电流随之增大，输出转矩相应增大，有效提高了步进电动机的高频运行特性；

• based on the single dc motor model, the mathematic model of dual-motors was established to analyze the problem of output torque balance of dual-motors.

  这一特殊结构使得正反转电机的驱动问题尤其是输出转矩平衡问题显得尤为突出。

• this paper presents a novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency.

  提出了一种新颖的感应电机开环速度控制法，在任一频率下，它不但能使电机输出高的力矩，而且使稳态速度误差几乎等于零。

• particularly suitable for requests to run a smooth, low noise, fast response, long life, high output torque applications.

  特别适合要求运行平稳、低噪音、响应快、使用寿命长、高输出扭矩的应用场合。

• when a double-salient motor works at high speed using standard angle control, the rise rate of commutation current is quite small. this limits the output torque and power of the motor.

  双凸极电机采用标準角度位置控制时，在高速运行换相时，电流的上升率较小，制约了电机的输出转矩和功率。