英语释义

• of or using a mixture of acetylene and oxygen;

  "an oxyacetylene torch"

  "oxyacetelyne welding"

• a mixture of oxygen and acetylene; used to create high temperatures for cutting or welding metals

片语

oxyacetylene flame氧乙炔焰

oxyacetylene cutter氧乙炔切割器

oxyacetylene welding[机] 氧乙炔焊

oxyacetylene scarfing氧乙炔火焰清理

oxyacetylene spray氧乙炔喷

oxyacetylene gouging氧乙炔焰表面切割

oxyacetylene torch氧炔焊炬

oxyacetylene spraying氧乙炔火焰喷涂

oxyacetylene blowpipe氧炔焊吹管

英汉例句

• it has been shown that the fine and spheroidal graphite is favourable to the oxyacetylene cutting perfomance.

  发现，愈是细小、圆整石墨形态愈有利于气割。

• this article expounds al coating technology and parameter chosce by analysing the oxyacetylene heat al coating of iron frying pan.

  提出了氧乙炔焰铝丝喷涂普碳钢灼勺工艺及适宜喷涂参数。

• ni-based and co-based alloy coatings were made on the q235 steel substrate by oxyacetylene flame spraying and fusing.

  采用氧乙炔火焰喷熔法在q235钢表面制备了镍基和钴基合金涂层。

• if the combustion states of the oxyacetylene can be identified by computer, it would make the auto-control of the combustion process better and the productivity improved.

  实现对氧乙炔火焰燃烧状态的计算机识别，可以更好地实现其燃烧过程的自动控制，有利于提高生产力。

• briefly introduce oxyacetylene flame spray「s equipment, dusty spray, spray technology and application example, which provides a basis for the correct usage of the technology.

  简要介绍了氧- 乙炔火焰喷涂的设备、喷涂粉末、喷涂工艺以及应用实例，为正确使用该项工艺提供依据。

• composite materials guide can be gotten by strengthening carbon steel guide with oxyacetylene hot spray welding. replacing high carbon alloy guide with it has a good result.

  用氧化乙炔焰热喷焊技术对普碳钢导卫装置进行表面强化，制成复合材导卫以替代高碳高合金导卫，取得较好效果。

• oxyacetylene flame is the hottest one known for ordinary use.

  氧炔焰是常规用途中最热的火焰。

• the coatings having heat-resistant and wear resistant performance can be obtained on copper parent metal by the subsonic speed oxyacetylene flame spraying.

  采用氧-乙炔亚音速火焰喷涂工艺对高炉铜质风口套表面喷涂耐高温、耐磨材料，可以改善工件的表面性能。

• in this paper, the oxyacetylene flame alloying powder spraying technology was used to strengthen the wear-proof surface of slurry valve.

  将氧-乙炔粉末喷焊技术用于渣浆阀耐磨表面的强化。

• the paper presents the structure, principle and effect of iron powder oxyacetylene cutting torch for stainless steel and comparison between this method and the others current at home.

  介绍铁粉氧- 乙炔法切割不锈钢割炬的结构、原理及使用效果，并与国内目前其他切割方法对比。

• the preferred method is by oxyacetylene flame. heat tube first, beginning one inch from edge of valve. sweep flame around tube in short strokes up and down at right angles to run of tube.

  首先从离阀门1英寸的地方开始对管道进行加热，然后围绕着管道短距离上下交替对管道进行火焰烘烤，并以适当的角度旋转管道，避免烧穿管道。

• oxyacetylene flame is the hottest one kwonn for ordinary use.

  氧炔焰是常规用途中最热的火焰。

• the method and technology of oxyacetylene flame braze welding for main cable wrapping at shantou bay bridge were introduced, and the difficulties of the welding were analyzed.

  介绍汕头海湾大桥主缆缠丝所采用的氧- 乙炔火焰钎接焊方法及其工艺，并对主缆缠丝焊接的难点进行了分析。

• the remaining 20%of the acetylene production is principally used for oxyacetylene cutting, heat treating, and welding.

  乙炔生产的剩余20%主要用于氧乙炔切割、热处理和焊接。

• for the oxyacetylene flame is widely used in the industrial production, the automatic monitoring of its combustion states is played more and more attention.

  由于氧乙炔火焰在工业生产中的广泛应用，其燃烧状态的自动监测越来越为人们所重视。

• analysis showed that the oxyacetylene flame cutting heat had reaustenitized a portion of heat-effected layer of the cut section.

  结果表明，切割下料时在切割面热影响层发生部分奥氏体化；

• in general, nonferrous materials cannot be cut by the conventional oxyacetylene cutting equipment commonly used for steel.

  [nf-7]一般，非铁基材料不可能采用常用于切割钢材的传统氧乙炔设备进行切割。

• in this study, ccd camera is used as optical sensor, and the oxyacetylene flame images and image sequences gotten from ccd are used as monitoring values.

  本实验以ccd摄像机作为光学传感器，将其采集到的氧乙炔火焰图像及图像序列作为监测值。

• the combustion process of the oxyacetylene flame is a random one, it obtains good result using the hidden markov model(hmm) which has good imitation ability on the random process.

  氧乙炔火焰的燃烧过程是一个随机过程，用对随机过程有很好模拟能力的隐马尔可夫模型（hmm）对其进行建模与识别，可以达到更好的效果。

• oxyacetylene flame can」 be used for welding of pipeline.

  管道焊接不得使用氧乙炔焰焊接。

• the influence of flake and spheroidal graphite on oxyacetylene cutting characteristic of cast iron has been analysed.

  讨论了石墨的物理性能，分析了片状和球状石墨聚集状态对铸铁气割性的影响。

• welding and cutting in 1949, beijing has geo-drilling, electric welding and cutting etc oxyacetylene flame manual operation.

  焊接与切割1949年，北京已有气焊、电弧焊及氧乙炔火焰切割等手工作业。

• the preferred method is by oxyacetylene flame .

  最好采用氧炔焰加热方法。

• the experiment of testing the moving oxyacetylene flame shows that this sensor can be used to measure the transient high temperature up to 2 000 ℃.

  运动乙炔焰模拟测试结果表明，高温测试范围可达2000 ℃，可用来对兵器及国防工业等诸多涉及燃烧和爆炸等过程的瞬态温度进行测试。