片语

plastic strain limit塑性应变限度

upper plastic limit塑性上限

plastic limit tests塑限试验

Plastic ultimate limit stage塑性极限阶段

plastic limit test塑限试验

plastic deformation limit塑性变形极限

Plastic Limit Analysis塑性极限分析

lower plastic limit塑性下限

plastic c limit塑性极限

英汉例句

• advances an improving rigid nonlinearity hardening approximate model of the constitutive relations using the traditional theory of plastic limit analysis.

  应用传统的极限分析理论，对可简化为刚塑性的材料本构关系提出了一种改进的「刚性-非线性强化」近似模型。

• as for simply supported circular plates under linear and uniformly distributed load, this paper calculate the plastic limit load by applying unified strength theory(ust).

  对于线性和均布荷载共同作用下的简支圆板，本文采用统一强度理论对其进行了塑性极限分析。

• in this paper, the method of singularity function is applied to the structural plastic limit analysis, and simplified the calculation of limit loads of some annular plates of fixed supports.

  本文将奇异函数法应用于结构的塑性极限分析，简化计算某些固支环形板的极限荷载。

• the plastic limit analysis of cylindrical reticulated shells has been studied in this paper.

  本文探讨了圆柱形网壳结构的塑性极限分析。

• in this paper, the method of weighted residual is applied to the structural plastic limit analysis.

  本文将加权残数法应用于结构的塑性极限分析。

• the analysis and contrast of deformation pattern, state of stress, plastic deformation history, plastic limit load and limit load of elastic buckling are analyzed and contrasted.

  最后对三种结构型式的拱顶储罐的变形方式、应力状态、塑性变形历史、塑性极限压力、弹性失稳临界压力进行了分析与对比。

• based on plenty of account data, engineering estimated formulas for plastic limit internal pressure were fitted for welded pipe branch junction with incomplete penetration along intersecting line.

  基于大量计算数据，拟合得出整圈未焊透三通量纲一塑性极限内压工程估算公式。

• some can get holomorphy solutions. in the course of plastic limit analysis, maybe there are the phenomena of producing yield-line.

  在规则边界的薄板的塑性极限分析过程中，通常会有产生塑性铰线这一现象。

• appraising the current methods of slope stability, the paper puts forward finite element plastic limit analysis of the slope stability subjected to pore water pressure.

  本论文对目前用于边坡稳定性评价的主要方法进行了研究对比后，提出了考虑孔隙水压力条件下的边坡有限元塑性极限分析法。

• at last, a formula presenting the relation of liquid plastic limit of organic soil is derived.

  最后，给出有机质土的液塑限关系推导公式。

• it is proved that the optimality conditions are also sufficient if the objective function is a convex function of the plastic limit bending moment.

  当目标函数是塑性极限弯矩凸函数时，证明了这一最优性条件也是最优解的充分条件。

• in this paper, the plastic limit method is used to investigate the strength of reinforced concrete slabs in punching shear.

  本文用塑性极限方法对钢筋砼板的沖切承载力进行了研究。

• a study for determining plastic limit moment of nozzles in cylindrical vessels is presented.

  对圆柱形容器在接管外载荷作用下的塑性极限载荷进行了研究。

• in this paper, a simple method on the plastic limit analysis of annular plates under linearly load has been given out. it is singular function method .

  本文结合环板在线性荷载作用下的塑性极限分析问题，给出一种简便的计算方法，即奇异函数法。

• in this paper, for the fir(?)t time a method of singular function is applied to structural plastic limit analysis, and simplified calculations of limit loads of some annular plates are carried out.

  本文首次将奇异函数法应用于结构的塑性极限分析，并用以计算某些环形板的极限荷载。

• plastic limit analysis is a physical nonlinear problem.

  塑性极限分析是物理非线性问题。

• the plastic limit loads of simply supported circular plates under various loads can be obtained based on the present solution.

  用本文的解还可以推出多种荷载作用下简支圆板的塑性极限荷载。

• since normal plastic theory is too complex, the membrane theory and the semi-membrane theory are adopted to establish the equilibrlm equations in plastic limit analysis.

  鑒于有矩理论的复杂性，本文在作极限分析时，采用了无矩理论和半无矩理论的平衡方程分别作为中短壳和长壳的平衡方程。

• based on the twin shear unified yield criterion, the plastic limit loads of simply supported circular plate under uniform annular load are given.

  用本文的解还可以推出多种荷载作用下简支圆板的塑性极限荷载。

• plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated analytically using a strain gradient plasticity theory.

  基于应变梯度塑性理论，分析了内压作用下厚壁圆筒和球壳的塑性极限荷载。

• in the plastic limit analysis, the wrinkler's plate is smartly analyzed in yield-line theory to get the critical compression strength of the coal pillar.

  在分析过程中，利用机动法对温克尔地基板（弹簧支撑板）进行了塑性极限分析，得出了煤柱抗压强度的临界值。

• the plastic limit analysis is applied to the unstable fracture load.

  对失稳断裂载荷进行了塑性极限分析。

• a study for determining plastic limit moment of nozzles in cylindrical vessels was presented.

  对圆柱形容器在接管外载荷作用下的塑性极限载荷进行了研究。

• by introducing the generalized method of cells (gmc) into plastic limit analysis, the bearing capacity of ductile composites is studied.

  本文将细观力学中的单胞（gmc）模型运用到塑性力学的静力极限分析中，研究韧性复合材料的塑性极限承载能力。

• a modified three-dimensional plastic limit analysis method is proposed for lateral bearing capacity of the large-diameter pipe pile in the inhomogeneous and anisotropic soft ground.

  对于非均质各向异性软土地基上管桩基础的承载力，基于塑性极限分析理论考虑软土强度的非均质与各向异性效应，提出了一种改进的三维极限分析上限解法。

• the plastic limit analysis made in this paper shows that one-way shear failure cannot be the most critical among possible shear-type failures of pile-caps at corners.

  本文用塑性极限方法证明，在角桩上可能发生的剪切型破坏中，单向剪切不起控制作用。

• in the second chapter, the plastic limit analysis theory is described in detail, and the calculation method of the limit load is presented.

  第二章详细论述了塑性极限分析理论，介绍了极限荷载的求解方法；

• the plastic limit loads of circular silos has been studied in this paper.

  本文研究了圆形筒仓的圆柱壳仓壁的塑性极限载荷。