片语

Plastic part design塑件设计

plastic automotive part汽车塑料

deepcavity plastic part深腔塑件

large-scale plastic outside part大型塑件

Plastic Injection Part塑料燃油喷射部件

PLASTIC PART WEIGHT注塑件件重

plastic housing part塑料面板

英汉例句

• The plastic part is also provided with an elongate groove above, through which the air director device passes.

  该塑料部件上方具有延伸的勾槽，所述空气导流装置穿过该勾槽。

• An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.

  在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。

• The key was a plastic 「ribcage,」 a complex molded plastic part that pushed the limits of injection-molding tooling technology.

  其中的关键是一种塑料特征「筋墻」，这是一种比较复杂的注塑塑料零件，达到注塑技术的极限。

• The MPH (MDH) pump's plastic part is reinforced with fiberglass while that of MPH (MDH) -f with carbon fiber.

  泵的塑料部件以玻璃纤维增强，MPH (MDH)- F泵的塑料部件以碳纤维增强。

• A technical analysis was made on a plastic part used in the left and right wind outlet of Volkswagen cars.

  对大众轿车左右出风口塑件进行了工艺分析，提出了合理的注射成型工艺。

• Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.

  分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。

• Through an example, the key problems of the small precise thin-thickness plastic part molding in injection mold were discussed. The solution was put forward.

  结合一个例子探讨了小型精密薄壁塑件成型模具设计中的一些关键性问题，并提出了一些可行的方法。

• Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.

  分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。

• The arrangement of the ribs has important effects on the rigidity of molded plastic part too.

  加强筋的布置对注塑件的刚度也有重要影响。

• Through designing the injection mold with 16-cavity for the inner cork of oil bottle, the ejection method of the plastic part with lateral uplift was introduced.

  通过对1模16腔的橄榄油瓶塞注射模的设计，介绍了带有侧向凸起的塑件的脱模方式。

• Hold the plastic part when assemble and unassembled.

  装卸时应手握塑料件部分。

• The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.

  从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。

• To make sure that a plastic part with helical gear and spur gear can be demoulded successfully, an injection mould is designed with double parting faces, point gate feeding and rotating demould.

  前言：为了保证一种既有斜齿轮又有直齿轮零件在注塑成形后能顺利脱模，给出了一套一模两位，点浇口进料，旋转脱模，胶套式二次分型的双分型面注射模的设计。

• During the installation process or open the case, review, plastic part damage may be caused by external factors.

  在安装过程中或打开的情况下，审查塑胶，可能是由于外部因素部分损害。

• When the load is removed, the elastic portion of the strain is recovered, but the plastic part (slip and creep) remains as permanent set.

  当荷载被移走时，应变的弹性部分恢复，但塑性应变部分(滑移和徐变)却会永久呆留。

• The concept and function of plastic part flow chart, and depicting method of flow chart for some basic geometrical objects are introduced respectively.

  介绍了塑料零件流程图的概念、作用及一些基本几何体流程图的绘制方法。

• Having 5 years or above plastic part design experience and at least 3 years project management experience. One also having metal pars design experience will be more preferred.

  至少5年以上塑胶件设计经验和至少3年以上项目管理经验。如果还有五金件设计经验者优先。

• Four, the size is stable, in the molding process, the plastic part and the mold contact surface compared to leave the mold part the size stability to be better.

  尺寸稳定，在成型过程中，塑件与模具接触的面要比离开模具部分的尺寸稳定性更好。

• With this mould automatic stripping of plastic part can be realized operation strength lowered, and production efficiency increased.

  该模具可实现塑件自动卸料，降低了操作强度，提高了劳动生产率。