英语释义

1. a synthetic rubber that has a high resistance to wear and is used especially in the manufacture of tires

片语

liqtid polybutadiene液体聚聚丁二烯

polybutadiene rubbers[橡胶] 聚丁二烯橡胶

cyclized polybutadiene环化聚丁二烯

POLYBUTADIENE DIACRYLATE聚丁二烯

terminated polybutadiene端羟基聚丁二烯

Hydrogenated polybutadiene丁二烯的氢化均聚物

Epoxidised polybutadiene环氧化胺化聚丁二烯

pb polybutadiene聚丁二烯

polybutadiene styreneresin聚丁二烯苯乙烯树脂

英汉例句

• the application of domestic li low cis polybutadiene rubber (lcbr) in the chafer compound of all steel radial truck tire was investigated by using an imported lcbr as control.

  对比国产和进口锂系低顺式聚丁二烯橡胶（lcbr）在全钢载重子午线轮胎胎圈护胶中的应用效果。

• the ultrasonic degradation of polybutadiene (pb) and block copolymerization of pb with acrylic acid(aa)in cyclohexane solution were studied.

  研究了在超声波辐照作用下聚丁二烯（pb）在环已烷溶液中的降解及与丙烯酸（aa）的共疑反应。

• the results showed that the scorch safety of polybutadiene rubbers was good;

  结果表明，聚丁二烯橡胶的焦烧安全性较好；

• results obtained with cis-1,4 polybutadiene and low density polyethylene are given as illustrative examples.

  文中尚有顺-1，4聚丁二烯及高压聚乙烯的实测示例。

• inverse gas chromatography was applied to the characterization of the surface properties of polybutadiene rubber (pbr).

  采用反相气相色谱技术测定了聚丁二烯橡胶的表面性质。

• the principle of design, constitution and character of control system for polybutadiene latex unit is presented.

  介绍了聚丁二烯胶乳聚合反应控制系统的主要设计原则，构成及其特点。

• the synthetic process and modification method of maleinized liquid polybutadiene and its applications in aqueous and nonaqueous coatings were reviewed in this paper.

  概述了顺酐化液体聚丁二烯的合成工艺，顺酐化液体聚丁二烯的改性方法及其在水性涂料和非水性涂料中的应用情况。

• star-type polybutadiene was synthesized by anionic polymerization using commercial divinylbenzene ( dvb ) as coupling agent.

  以工业二乙烯基苯（dvb）为偶联剂，用阴离子聚合法合成了星形聚丁二烯。

• the results showed that the ht-ips resin had microscopic phase separation structure, and polybutadiene chain was dispersed phase, polystyrene chain was continuous phase.

  结果表明，ht-ips树脂具有微观相分离结构，聚丁二烯链段为分散相、聚苯乙烯链段为连续相；

• the high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(elpb) cured by pyromellitic dianhydride(pmda) and benzoyl peroxide(bpo).

  采用均苯四甲酸酐（pmda）和过氧化二苯甲酰（bpo）双固化剂固化聚丁二烯环氧树脂（elpb），制备了elpb/pmda/bpo耐高温胶粘剂。

• the synthesis technologies of alkali metal alkoxides(phenoxides) and their applications in liquid polybutadiene rubber, styrene-butadiene rubber and organic synthesis were reviewed with 35 references.

  综述了堿金属醇、酚盐几种不同的合成方法及其在液体聚丁二烯橡胶、丁苯橡胶和有机合成等领域的应用。

• the sulfonating reaction was found on the unsaturation bonds of polybutadiene basing on the research of dynamics of the sulfonating action and ftir analysis of reacted products.

  通过研究磺化反应的动力学和对磺化产物的分析测试，提出磺化发生在聚丁二烯的双键上新观点。

• under these conditions, a production plant can be able to produce polybutadiene with appropriate mooney viscosity and cis-structure content greater than 98%.

  在此条件下，可以制备出既具有合适的门尼黏度值、顺式结构含量又大于98%的聚丁二烯。

• because of demands on tire skid resistance, polybutadiene with high vinyl content are of particular interest to tire industry due to the inherently better grip properties.

  高乙烯基聚丁二烯具有高抗湿滑性和良好的耐热氧老化性，是制造高性能轮胎的优异材料。

• the properties of the blends are very similar to that of middle vinyl polybutadiene rubber.

  共混胶性能非常类似于中乙烯基聚丁二烯橡胶。

• in this paper, the basic resins, including epoxy resins, acrylic resins, polybutadiene resins and polyurethane resins, for cathodic electrodeposition paint and related che…

  本文简要介绍了以环氧树脂、丙烯酸树脂、聚丁二烯树脂、聚氨酯树脂等为主体的阴极电泳涂料主体树脂和相关的化学反应。

• the thesis also studies the effect of different factors on microstructure of star-shaped polybutadiene and star-shaped butadiene-styrene random copolymer.

  论文同时研究了不同因素对星型聚丁二烯和星型丁苯无规共聚物微观结构的影响。

• the raw materials comprises (by weight): liquid rubber 90-99.8 percent and organic modified clay 0.2-10 percent, wherein the liquid rubber is liquid carboxyl terminated polybutadiene rubber.

  它的原料的重量组成包括：液体橡胶90-99.8％，有机改性黏土0.2-10％，所述的液体橡胶为液体端羧基聚丁二烯橡胶。

• liquid polybutadiene produced this way can be used as multiterial for green coating.

  制得的液体聚丁二烯调聚物可用作绿色涂料的原料。