英语释义

1. any of a class of polymeric synthetic resins resistant to high temperatures, wear, and corrosion and used especially for coatings and films

片语

aliphatic polyimide脂族聚酰亚胺

Hyperbranched polyimide超支化聚酰亚胺

soluble polyimide可溶性聚酰亚胺

crosslinked polyimide交联聚酰亚胺

PI Polyimide聚酰亚胺

polyimide tubing聚酰亚胺管的种类

polyimide film聚酰亚胺薄膜

polyimide resin[树脂] 聚酰亚胺树脂

Polyimide Film聚酰亚胺薄膜

polyimide fiber聚酰亚胺纤维

英汉例句

• Various polyimide was synthesized from 3-BAPP with various dianhydrides. The application of the polyimiders to two-layer flexible copper clad laminate(2L-FCCL)was researched.

  用3-BAPP与多种二酐合成出多种聚酰亚胺，并在二层法挠性覆铜板（2L-FCCL）的应用方面做了一些研究。

• Poly (ether imide) (PEI) is a modification kind of high performance polymer, which adds a ether bond to macromolecular chain of polyimide (PI).

  聚醚酰亚胺(PEI)是在聚酰亚胺(PI)链上引入醚键形成的一类高聚物。

• Base materials for printed circuits. part 2: specifications. specification no 15: flexible copper - clad polyimide film, of defined flammability.

  印刷电路用基材。第2部分：规范。15号规范：规定易燃性的包铜软聚酰亚胺薄膜。

• The effect of polyimide structure on LC pretilt angle has been investigated widely, but to our knowledge, the effect of monomer charge order on pretih angle has not been explored.

  文献大多研究聚酰亚胺结构对液晶预倾角的影响，而加料顺序对预倾角影响的研究，迄今还未引起注意。

• The composition, the molecular and the characteristics of polyimide (PI) fiber as a precursor of carbon fibers were introduced.

  介绍了作为碳纤维前驱体的聚酰亚胺（PI）纤维的组成、分子结构和特性；

• Scanning tunneling microscope (STM) is exploited to characterize morphologies and molecular structures of polyimide Langmuir-Blodgett(LB) monolayers.

  扫描隧道显微镜（STM）被用来表征聚酰亚胺LB膜的形貌及分子排列结构。

• The tensile strength of polyimide film will also be affected by the temperature of de-solvent and the heating way of thermal imidization.

  不同的去溶剂温度和热亚胺化的升温方式对聚酰亚胺薄膜拉伸强度也有较大的影响。

• The contact bulges under the bridge are achieved by the full etching and partial etching of the polyimide sacrificial layer.

  在工艺上，特别采用了对聚酰亚胺牺牲层进行全刻蚀和半刻蚀的改进加工流程来实现桥背面的接触点。

• The closed cell polyimide foams were fabricated by foaming the precursor balloons, and the foams' acoustic absorption properties were tested.

  采用前驱体微球法制备闭孔聚酰亚胺泡沫，并对其吸声性能进行了研究。

• An aromatic polyimide made by reacting pyromellitic dianhydride with an aromatic diamine; has high resistance to thermal stresses; used to made components of internal combustion engines.

  苯四酸二酐与芳香二胺反应制得的芳香族聚酰亚胺，具有高耐热应力，用于制造内燃机部件。

• Then, the array was got soaked in liquid polyimide so as to make a sub-micron insulating layer, and it was evaporated.

  然后阵列用液态的聚酰亚胺包裹，形成一个亚微米的绝缘层，然后风干。

• This paper reviewed the synthesis, function and current condition of second- order nonlinear optical polyimide material in recent years, and then analyzed its application prospect.

  综述了近年来二阶非线性光学聚酰亚胺材料的合成、性能和现状，并对其应用前景进行了展望。

• The effect of coating conditions on the membrane distillation properties of the obtained polyimide microporous composite membrane was investigated.

  研究了涂覆工艺条件对所得聚酰亚胺疏水微孔复合膜的膜蒸馏性能的影响。

• The production technology, applications and product prices of polyimide film were overviewed in this article.

  综述了我国聚酰亚胺薄膜的生产技术、应用以及产品价格。

• This paper summarizes the properties, synthesis methods, manufacture processes and applications of polyimide foam, and some directions in further researches are presented.

  对聚酰亚胺泡沫材料的性能、合成方法、生产工艺、用途等进行了综述，并对今后的研究方向进行了展望。

• Therefore, great interests are aroused by the study of sulfonated polyimide membranes. Advance in proton conducting materials based on sulfonated polyimides is reviewed in this paper.

  综述了磺化聚酰亚胺用于质子导电材料的研究进展，讨论了各种不同磺化二胺体系的独特优势以及存在的问题。

• A new polyimide (PI) -cantilever MEMS optical switch of electromagnetic actuation is proposed, and the structure of the optical switch is designed and simulated.

  介绍了一种新型的聚酰亚胺(PI)悬臂梁式电磁驱动微机电系统(MEMS)光开关，并对其总体结构进行了设计与仿真分析。

• On this basis a new method for fabricating polyimide ridge waveguides by photobleaching technique and using metal mask is proposed.

  并在此基础上，提出了以金属掩模，利用光漂白技术制备聚酰亚胺脊型光波导的新方法。

• A coatings containing polytetrafluoroethylene (PTFE) was prepared with polyphenylene sulfide (PPS) and polyimide (PI) as adhesive which were mixed with PTFE in a suitable solvent.

  以聚笨硫醚(PPS)和聚酰亚胺(PI)为复合粘结剂与聚四氟乙烯(PTFE)混合于合适的溶剂中，制成含ptfe的涂料。