片语

sterile powder for injection注射用无菌粉末

powder-injection pile喷粉桩

powder spraying喷粉；粉末喷镀

powder mixture injection混合粉剂喷吹

Danshen powder for injection丹参粉针剂

Lyophilized Powder for Injection冻干粉针剂

Powder for Injection注射用灭菌粉末

Somatuline Powder for Injection索马杜林注射用粉针

英汉例句

• The circs of collision of particle(granule and molecule)in the powder and binding two-phase flow for powder injection molding is studied.

  分析了粉末注射成形中粉末—粘结剂两相流动中粒子（颗粒与分子）碰撞的情况。

• Micro powder injection molding is becoming hot spot rapidly because of its broad marketplace prospect, but as the flow mechanism is not still clear, it leads to the instability of product quality.

  粉末微注射成型由于其市场前景广阔而迅速成为当今的研究热点，但由于其流动机理尚不明朗导致产品质量不稳定。

• The ceftizoxime powder injection prepared by the method has moisture content less than 8.0%.

  按照本发明的制备方法制备的头孢唑肟钠粉针制剂，其水分含量低于8.0%。

• This paper focused on the microstructural controls needed for various high performance and functional sintered materials through powder injection molding process.

  这篇论文主要研究了用粉末注射成形工艺制造各种高性能与功能烧结材料时，需要的显微组织控制。

• Ceramic powder injection molding is a new molding technique developed from modern powder injection moldings techniques.

  陶瓷粉末注射成形是从现代粉末注射成形技术中发展起来的一项新型成形技术。

• The effective position are extracted and then they are prepared into powder injection by the technology of freezing.

  采用酸溶堿沉法对三批来源不同的北豆根药材分别进行提取分离，所得有效部位采用冻干技术制成粉针剂。

• Methods After injected Yinghuang freeze-dried powder injection nerve system and general behavior of rat or mouse were observed.

  方法银黄冻干粉针注射给药，观察给药后对小鼠和大鼠中枢神经系统的影响和一般行为表现。

• Considering deficiencies of traditional powder injection in ladle, slot plug with conical fluidized bed used for bottom powder injection in ladles was developed.

  针对传统钢包喷粉工艺的不足，开发了从钢包底部喷吹的喷粉型狭缝式透气砖。

• The applications of powder injection molding (PIM) in the production of bonded and sintered magnets for soft magnetic material were discussed.

  介绍了粉末注射成形在粘结软磁、烧结软磁生产中的应用、研究开发状况。

• Conclusions Erxieting Keli combined Shuanghuanglian powder injection in treatment of children with acute diarrhea effect is significant.

  结论儿泻停颗粒联合双黄连粉针治疗小儿急性腹泻病疗效显着。

• This study was aimed to evaluate the biocompatibility of metal powder injection molding (MIM) 316l stainless steel.

  研究金属粉末注射成型(MIM)法制备的316L不锈钢植入材料的生物相容性。

• Inspections show that bituminous coal powder injection into blast furnace of China is in a period of developing and on the way to perfection.

  考查表明，我国高炉喷吹烟煤正处于发展时期，尚待完善。

• The theoretical model and research status of the simulation of powder injection molding filling process are reviewed. Their merits and demerits are analyzed and compared.

  综述了目前用于粉末注射成形充模流动模拟所采用的理论模型及其应用研究现状，并对各自的优缺点进行了分析。

• The powder injection molding technology, features and application in materials such as refractory tungsten alloys and hard alloys are reviewed in this paper.

  本文阐述了粉末注射成形技术及其特点，以及在难熔钨合金和硬质合金及其它材料中的应用。

• The effects of sintering process on the properties of 4J32 low expansion alloys by powder injection molding were investigated.

  研究了烧结工艺对粉末注射成形4J32低膨胀合金性能的影响。

• Compound injection charged with magnesium oxide in coal powder was tested based on the current coal powder injection situation.

  针对安钢高炉喷吹用煤现状，通过对煤粉添加氧化镁混合喷吹进行了试验。

• The dephosphorizing agent containing 20 percent LD slag was optimized by the powder injection experiments in laboratory, the dephosphorization ratio reached 70 percent.

  经过实验室铁水喷粉脱磷试验，筛选优化出含20％转炉渣的脱磷剂，脱磷率达70％。

• The powder injection molding material is superior to conventional powder metallurgy method such as excellent mechanical strength, higher density and better surface finish.

  粉末注射成形材料在机械性能、密度及表面粗糙度都比一般粉末冶金材料为好。

• This paper describes briefly the advantages and disadvantages of water-soluble binder. The applications of water-soluble binder in foundry molding and powder injection molding are illustrated.

  阐述了水溶性胶粘剂的优缺点，介绍了水溶性胶粘剂在铸造成形、粉末注射成形工艺中的应用。

• Ceramic powder injection molding is a new molding technique developed from modern powder injection molding technology.

  陶瓷粉末注射成形是从现代粉末注射成形技术中发展起来的一项新型成形技术。