pressure plate中文,pressure plate的意思,pressure plate翻译及用法

2025-11-01 10:35 浏览次数 11

pressure plate

英[ˈpreʃə pleit]美[ˈprɛʃɚ plet]

压板

pressure plate 英语释义

英语释义

    1. a plate in an automobile dry disk clutch that is pressed against the flywheel to transmit propulsion torque to the wheels

pressure plate 例句

英汉例句

  • thermal expansion pipe, cs type ware, it is by the expansion set, pressure plate and telescopic combination to body.

    热力管道伸缩器型号cs型,它是由伸缩套、压盘和伸缩体组合而成。

  • the compressing device includes a pressure plate and a slide rail guiding sleeve.

    压缩装置包括压板、滑轨导向套;

  • turn around and you should see two small boxes and a pressure plate .

    回头,你应该看到两个小盒子和一个压盘。

  • advantage plate heat exchangers consist of a number of stainless steel transfer plates that are held in place between a fixed plate and a movable pressure plate to form a complete unit.

    advantage的板式换热器由许多不锈钢板组成,放在安装版和移动压力板之间,形成完整的设备。

  • one side of the pressure plate is machined smooth . this side will press the clutch disc facing are against the flywheel .

    离合器压盘的一边是光滑的,这边将离合器片朝飞轮方向挤压。

  • neither the driven plate nor the pressure plate is connected rigidly to the flywheel and both can move either towards it o away .

    离合器从动盘和压盘都不是直接连在飞轮上的,但两个都朝飞轮方向移动。

  • the clutch pressure plate is generally made of cast iron .

    离合器压盘通常是用铸铁制成。

  • the joint ied defeat organization said on its website that during testing in afghanistan beginning in 2008, the system successfully detected pressure plate ieds before they detonated.

    ied联合防御组织在其网站上说,2008年在阿富汗开始的测试中,该系统成功地检测到密封金属ied。

  • lift the clutch pedal, start to lift soon, when the feeling gradually with the clutch pressure plate linked to a half, it begins to slow down.

    抬起离合器踏板时,开始要快抬,当感觉到离合器压盘逐渐结合至半联动后,开始放慢速度。

  • this is the third pressure plate both the art of lock.

    这就是三板俩锁分压的艺术。

  • the movable device mainly consists of the nut, bolt, lifting wedge, backseat, supporting seat of the clamp plate, spring and pressure plate and so on.

    活动装置主要有螺母、螺栓、提升楔块、后座、座板支座、弹簧以及压板等组成。

  • when your foot is off the pedal, the springs will push the pressure plate against the clutch disc, which in turn presses against the flywheel.

    当你松开踏板,膜片弹簧将压盘逐渐压紧在离合器盘上,压力依次传动飞轮。

  • check the air gap between the pressure plate and belt pulley with a depth gauge.

    用深度计检查压盘和皮带轮之间的气隙。

  • the clutch disc fits between the flywheel and the pressure plate .

    离合器盘和飞轮之间的适合的压力板。

  • the result is that both flywheel and pressure plate rotate together.

    压盘与飞轮连接,这样飞轮和压盘一起旋转。

  • my company has the most advanced fully automatic production line pressure plate , the product has been widely applied to the construction industry in china.

    我公司拥有国内最先进的全自动压型板生产流水线,产品已广泛实用于我国的建筑行业。

  • as the middle of the diaphragm spring is pushed in, a series of pins near the outside of the spring causes the spring to pull the pressure plate away from the clutch disc.

    当膜片弹簧的中心被推凹进去时,在弹簧周围的一圈铆钉将压盘后拉,使压盘与离合器分离。

  • to help the operator to facilitate memory, instructions can be pressure plate (outer ring fixed disk) in the red arrow aimed at the weight value.

    为了帮助操作者便于记忆,可将加压指示盘(外圈动盘)中的红箭头对準重量值。

  • when the pressure plate turns around, the sanitary wastewater in a storage water tank is dragged up to wash the toilet device, thus playing a role of wastewater reutilization.

    当压板回转时,将储水箱内的生活废水回吸沖洗便器,起到废水的二次利用。

  • panel installation starts after pressure plate installation. rest the panel gently on the transom and make it move right and left and them push it into the pressure plate .

    压板安装后,进行面板的安装,将面板块轻轻地搁在横梁上向左右移动,推入到压板内。

  • loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.

    松开和拆卸隔膜锁紧螺母和锁紧垫圈,从阀桿上往下压阀盘和隔膜。

  • the contact area pressure distribution of 185r15 and 165/79sr13 radial tires with different tread patterns at different load and inflation pressure was determined by the pressure plate method.

    采用压力板法测试了185r15和165/79sr13两种规格子午线轮胎的接地压力分布,并在不同负荷、不同气压以及不同花纹情况下分别进行了接地压力分布的测量。

  • to examine diaphragm, disassemble coupling nut (6) and lift off pressure plate (7).

    检查隔膜,拆卸连接螺母(6)并提升压力板(7)。

相关热词