片语

Injectivity profile modification well调剖井

water-plugging and profile-modification堵水调剖

tooth profile modification齿廓修形

waterflooding profile modification注水剖面调整

profile shifted modification移距变位

steam injectivity profile modification调整吸汽剖面

profile modification agents调剖剂

profile permeability modification渗透率调剖

英汉例句

• the experiment shows that the higher the density of polymer slug is, the bigger the slug size is, the earlier the injective time is, and the better the effect of profile modification is.

  实验结果表明：体膨聚合物质量浓度越高、段塞尺寸愈大、注入时机愈早，调剖效果愈好；

• a mathematical model for the optimization of gear dynamic performance is developed and the optimum gear profile modification parameters are then determined by the optimal design approach.

  在动态分析的基础上建立了齿轮动态性能优化数学模型，以齿轮动态性能最优为目标，采用优化设计方法，确定最佳齿廓修形量和修形长度。

• at last, the crosslinking mechanism of the profile modification system on hap was analyzed, too.

  在此基础上分析了疏水缔合聚合物调剖体系的成胶机理。

• the computation shows that, although it gives the less influence to the transmission error, the tooth profile modification gives the larger influence to the return error.

  计算表明，摆线齿轮的齿廓修形虽然对传动误差的影响不是很大，但对回程误差的影响较大。

• oil wells after a profile modification of construction, conventional water shutoff used large plugging agent and the effect is not obvious.

  油水井在进行了多次调剖堵水作业之后，常规的调剖堵水作业的堵剂使用量大而且增产效果不明显。

• appling advantageous property of modified starch, the strong gels water plugging and profile modification agent for medium-low temperature reservoirs is developed.

  利用改性淀粉的优越性能，开发出了一种适用于中、低温油藏的改性淀粉强凝胶堵水调剖剂。

• profile modification agent szx was composed of sludge produced during waste - water reinjection as main agents and quantitative additives.

  szx 调剖剂是将油田污水回注处理过程中产生的水处理淤泥作主剂，加入一定量添加剂组成。

• therefore, it is significant for improving the performance of wind turbine to study the dynamics of helical gear boxes and its gear profile modification technology.

  因此，研究增速箱斜齿轮的动力学特性及齿廓修形技术对于提高风机运行的性能具有很大的意义。

• present paper has probed into the influences of sevei-al typical profile modification of gear tooth on instantaneous transmitting errot and gaer noise.

  本文对几种典型的齿轮齿形曲线修整对瞬时传动比和噪声的影响进行了探讨。

• the hpam/mlh 1 gelling fluid has been successfully used in injectivity profile modification operations in 36 wells at daqing.

  mlh1体系已成功地用于大庆油田36口注水井近井地带的调剖作业。

• procedure of solvation of a certain automotive transmission gear profile modification parameters is surveyed, which provides the basis for formulating…

  探讨了某汽车变速器齿轮修形参数的求解过程，并为汽车齿轮修形规范的制订提供一定依据。

• as traditional graphical method to design wrap profile modification using twin-circular arcs has higher design error, an analytical design method was proposed.

  难以满足涡旋齿啮合的高精度要求，应采用解析法进行型线修正设计。

• the gears of austempered ductile iron (adi) and the gear profile modification technique can effectively reduce transmitting gear「s noise.

  应用奥贝球铁（adi）代替合金钢制造传动齿轮并进行齿形修正，显着降低噪声水平。

• a water - plugging and profile modification agent was prepared using acrylamide and cationic monomer as main materials, and adding acrylic acid, crosslinking agent and other additives.

  以丙烯酰胺、阳离子单体为主要原料，加入丙烯酸、交联剂及其他添加剂，制得抗盐型调堵剂。

• all research provide essential theory basis of manufacturing profile modification cycloid gear.

  为修形摆线轮的制造提供了理论基础。

• objective: to evaluate the effects of atorvastatin on lipid profile modification in patients with dyslipoproteinemia.

  目的：观察阿托伐他汀对异常脂蛋白血癥病人的调脂效果。

• the precrosslinking swellable particulate profile modification agents were evaluated and applied.

  对水膨体调剖剂进行了测定和评价。

• the pre-designed manufacturing transmission error curve is defined as profile modification parameter, the modified teeth faces are established based on virtual manufacturing process.

  定义空载传动误差设计曲线为齿廓修形参数，根据虚拟加工过程，建立修形齿廓方程。

• a polymer particle profile modification agent was prepared using acrylic acid and acrylamide as materials, adding foamer a and high temperature resistant monomer b.

  针对目前油田普遍存在调剖剂用量大、不经济等缺点，以丙烯酸和丙烯酰胺为原料，通过加入发泡剂a和抗高温单体b，制备了聚合物颗粒调剖剂。

• for extending valid period and improve swellable particulate」s profile modification effect, analyzed various effect, educed relevant technical countermeasure. it is useful for locale apply.

  为延长水膨体调剖有效期，提高水膨体堵水调剖的效果，通过对以上各因素进行分析，提出了相应的技术对策，对矿场应用有指导作用。

• the theory and corresponding experiment of the intensity profile modification of a gaussian laser beam by an ultrasonic standing wave (controlled by electricity) are reported and discussed.

  本文报道和讨论了在超声驻波作用下实现激光高斯光束空间强度整形的原理与实验。

• in order to minimize the fluctuation of gear transmission error, a procedure for deciding tooth profile modification curves was developed for involute spur gears.

  以理论渐开线直齿轮修形减振为目的，分析减小齿轮传动误差波动，啮合齿对齿廓综合修形参数应满足的几何条件；

• theoretical and experimental results of the intensity profile modification of a gaussian laser beam by 2-d ultrasonic standing waves are reported.

  给出了在两维驻波声场作用下，激光高斯光束空间强度被整形的两维理论。

• this paper summarizes the types, application and effects of water shutoff agents and the new development of permeability profile modification technique in huabei oilfield company of cnpc.

  对中国石油华北油田公司「九五」期间堵水调剖技术的堵调剂种类、应用状况、调水增油效果以及堵水调剖技术的新发展进行了总结论述。