片语

release e rate of CFCs放出含氯氟烃的速率

release rate constant速率常数

release rate in vitro体外释放度

mechanical energy release rate机械能释放率

Local Energy Release Rate局部能量释放率

energy release rate G能量释放率G

gas release flow rate泄漏率

release propagation rate缓解波速

英汉例句

• accident tree analysis is applied to risk analysis and a mathematical model is established, including fire model, effective release rate model, heat intensity threshold and hazard area equation.

  采用事件树分析法进行风险分析并建立了数学模型，包括火灾模型、有效释放率模型、热强度极限值、危险区域等式四部分。

• analysis and evaluates the characteristics of typical attack scenarios from the aspects of the possibility, ability of concealment, release rate and harmfulness of the possible attacks.

  从袭击发生的可能性、隐蔽性、生化制剂的释放速度和危害性这四个方面，对典型生化袭击场景的特性进行了分析和评价。

• outlier tests have no applicability in cases where the variability in the product is what is being assessed, such as for content uniformity, dissolution, or release rate determinations.

  逸出值测试在正是要评估产品的变异性的情况下不适用，如含量均一性，溶解度，释放率测定。

• the energy release rate is calculated with the boundary collocation method.

  最后，用边界配置法求解了能量释放率。

• the solutions are compared with the energy release rate of linear elasticity.

  解答与线弹性的能量释放率进行了比较。

• the need to tailor release rate profiles from polymeric microspheres is a significant problem.

  需要得到多聚体微球的释放率情况，这是一个非常大的难题。

• the formulas for radiation densification, swelling, fission gas release rate and transient release are given.

  给出了辐照密实、肿胀、裂变气体释放率和瞬时释放表达式。

• an energy method for determining fracture toughness of fibrous composite laminates was based on the theory of elastic energy release rate and crack-growth resistance in this paper.

  应用线弹性断裂力学的弹性能释放率及裂纹扩展阻力等基本概念和理论，建立起确定纤维增强高分子聚合物复合材料断裂韧性的能量方法。

• using conformal mapping method and operation mathematical calculate the strain energy release rate g of curvilinear interface between dissimilar media.

  利用保角变换方法，经过数学运算，推导出两种介质曲线交界面上的能量释放率。

• the energy release rate for crack propagation depends only on the stress intensity factor and the material constants.

  电导通裂纹模型中的静电场对裂纹尖端扩展的能量释放率不作贡献。

• due analysis has been made and it is found that the nonlinear energy release rate of orthotropic plate with a, crack is dependent on the biaxial load factor.

  本文分析双向加载下正交异性裂纹板的非线性能量率，指出所研究的裂纹板的非线性能量释放率与双向加载因子有关。

• the two dimensional accurate solution is obtained on plane strain assumption, the numerical results of strain energy release rate and crack tip energy release rate are presented.

  在平面应变假设下，给出其二维精确解，并提供了机械应变能释放率和裂尖能量释放率等数值结果。

• numerical solution of these equations yields the intensity factors and the energy release rate at the crack tip.

  求解这些方程组，获得了裂纹尖端的强度因子和能量释放率。

• we show from in vitro release experiments that microsphere size has a significant effect on drug release rate. the initial release rate decreased with an increase in microsphere size.

  从体外释放试验中可知微球大小对药物释放率有很大的作用。药物开始释放率与微球大小负相关。

• in the case of constant displacement, the energy release rate will decrease with time, until it reaches a lower limit value.

  在常位移的情况下，能量释放率将随时间而减少，直到它达到某一较低的极限值。

• the observer is applied to estimate release rate of carbon dioxide to get residual sequence.

  二氧化碳释放率以便得到残差序列，分类器用于对残差序列进行分类。

• the strain energy release rate of the crack propagation was calculated by using virtual crack closure technique, and fatigue life was forecasted.

  采用虚拟裂纹闭合技术计算裂纹扩展的应变能释放率，并对裂纹扩展寿命进行计算。

• an exact expression of energy release rate for geometrical nonlinear elastic fracture mechanics is obtained for an infinite plate with central crack under uniform stress normal to crack surfaces.

  对含中心裂纹的无限大板在裂纹表面受均匀分布压力作用的情况，导出了几何非线性弹性断裂力学的能量释放率的一个精确表达式。

• in addition, mass loss rate was not the only parameter influencing heat release rate in cone calorimeter for agaric .

  同时，木耳的质量损失速率不是影响其热释放速率的惟一因素。

• the general solution of the electromechanical field, intensity factors and energy release rate are obtained, which are expressed in terms of series expansion.

  得到了级数形式表达的电场和弹性场的基本解、场强度因子和能量释放率。

• the main conclusion is that: when the temperature field in the crack surface is uniform, the energy release rate will decrease with time, until it reaches a lower limit value.

  其主要结论是：当裂纹面内的温度埸恒定时，能量释放率将随时间而减少，直至某一较低的极限值。

• this paper presents a theoretical analysis about the propagation rule of the micro-crack in brittle materials under axial compression, based on the energy release rate criterion.

  本文利用混合型裂纹扩展的能量释放率理论对脆性材料受轴向压缩时其内部微观裂纹的扩展规律进行了研究。

• the energy release rate and failure criterion for mixed mode are investigated by means of the method of equivalent linear crack extension.

  利用当量直线裂纹扩展法研究复合型裂纹的能量释放率及相应的断裂判据。