片语

ring rolling machine[机]

cold ring-rolling冷辗环机

seamless ring rolling无缝环轧制

ED-Ring-rolling电火花摆碾

ring rolling mill环形材轧机

cold ring-rolling mandrel冷轧芯辊

ring parts rolling环件轧制

英汉例句

• Some Suggestions for in-depth research and further application of ring rolling technology are put forward.

  提出了深入研究和推广应用辗扩成形技术的建议。

• The model is very useful in practical ring rolling production analysis and can find application in other rolling processes like strip and plate rolling etc.

  该模型可用于实际生产中的工艺分析，不仅适用于环件轧制，亦适用于板带连轧等其它轧制过程。

• Principle, sorting, equipment and main parameters of ring rolling technology have been introduced, and research on such technique both overseas and domestic and application domestic been expounded.

  介绍了环件轧制的原理、分类，环件轧制的设备及其主要参数。阐述了国内外环件轧制技术的研究情况以及环件轧制在国内的应用。

• The blank design method for ring with rectangle cross section is derived based on the ring rolling theory and practical experience.

  基于环件轧制理论和实践经验，提出了矩形截面环件和外台阶截面环件的毛坯设计新方法，给出了具体的毛坯设计方案。

• Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.

  研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。

• Temperature variation is an important factor affecting ring rolling process.

  温度变化是影响环件轧制过程的重要因素。

• The formulae of roll force and torque are verified by ring rolling experiment.

  根据环件辗扩实验结果，对文中的辗扩力和力矩计算公式进行了验证。

• The ring rolling simulation was analyzed based on ABAQUS. And then the qualified products were produced by D50G91 roller.

  基于ABAQUS对冷辗扩过程进行了数值模拟，并在D50G91轧环机上轧制出了质量较好的环件成品。

• The research can be used as a theoretical foundation of on-line measurement and control for cold ring rolling process.

  此研究为环件冷轧过程在线测量和控制提供了理论依据。

• The calculated results are very helpful to more deeply understand the deformation mechanics of ring rolling process and useful in practical ring production and design of mills.

  所得到的结果有助于深入了解环件轧制过程的机理，对实际生产和轧制设计具有一定的指导作用。

• First, the paper presents the simulation of ring rolling processes by rigid-viscoplastic dynamic finite element method and the H-RING code.

  采用刚粘塑性动力有限元模拟环轧动态过程，获得轧制过程中的分布量计算结果。

• The model would be used for design of the cold ring rolling process controller.

  模型已用于冷轧环工艺控制器的设计。

• Dimension control is a key problem to be solved while applying ring rolling process to practical production.

  尺寸控制是辗扩工艺应用于生产实际所必须解决的一个关键问题。

• At present, the ring rolling technology roll one ring in one process, and the technology can't deal with stress focus on the sharp taper Angle of mandrel roller.

  目前锥形套圈辗扩技术只能一次成形一件，而且由于锥形套圈锥角使得芯辊应力集中严重。

• Present design criterion for the roller. This will be have guiding significance to the design of ring rolling technology.

  在综合考虑各种因素的基础上提出了轧环机轧辊设计準则，对环件轧制工艺设计有指导意义。

• Three rolling schedules were selected, dynamic simulations on the preloaded housing of cold ring rolling mill were proceeded with 3d finite element method, the results were compared.

  选取3种轧制规程，用三维有限单元法对预紧机架进行了动力仿真，并进行了分析和比较。

• Cold ring rolling is a technology to produce high precision and performance seamless ring and its process has strong nonlinear.

  冷辗扩是一种生产高精度、高性能无缝环的技术，其过程具有很强的非线性。

• The controlling of guide roller in ring rolling is very important.

  导向辊的控制在环件辗扩中有着重要意义。

• The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.

  采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。

• The Proposed model has the merits of reflecting the various aspects of ring rolling process more accurately and making it possible to realize the CAD/CAM system in practical ring rolling production.

  结果表明，该方法能较精确地反映出环件轧制中各物理量变化规律。因此，为实现环件轧制过程的CAD／CAM奠定了基础。

• The blank design principle and method for rolling ring with stepped hole is developed based on the volume flow law and the comparison to the ring rolling experiment is done.

  基于阶梯孔环件轧制体积流动规律，提出了阶梯孔环件轧制用毛坯设计原理和方法，并进行了轧制实验验证。

• Cold ring rolling is a new technology to produce high-tech seamless rings. The asymmetry of the metal distribution in the taper ring causes large axial force, as well as sunken side faces.

  冷辗扩是生产高质量无缝环件的新工艺，圆锥套圈辗扩由于金属分布的不均匀导致辗扩过程会产生较大轴向力，同时端面出现拉凹。

• He understood that people need affection, he knew there was no warmth, no love life, just like a dry wheel, when the rotation of the ring rolling ring.

  他明白了人是需要感情的，他知道没有温情，没有爱的生命，就象一个干燥的车轮，转动时格轧格轧的乱响。

• In this paper, the engaging movement of ring rolling is analyzed; a conjugate design method for ring rolling groove is developed based on the gear engaging theory.

  本文分析了环件轧制的啮合运动，基于啮合理论提出了环件轧制孔型的共轭设计方法。

• Based on the reduced scale ring rolling and finite element simulation materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.

  摘要研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。