片语

composite runner system复合进浇系统

the runner system浇注系统

iron runner system铁水沟系统

SINO HOT RUNNER SYSTEM柳道模具配件有限公司

choked runner system闸喉式流道

runner r system浇道系统

runner and riser system浇冒系统

MINI RUNNER SYSTEM微型半热流道系统

runner design system浇注设计系统

英汉例句

• The structure design and the calculation of the sizes, heating power, linear swell value of hot runner system were discussed in detail. A two-step demoulding mechanism was also introduced.

  详细介绍热流道模具浇注系统结构设计和尺寸计算、热流道板加热功率计算、热流道板线膨胀量计算及在设计时应注意的一些问题，并介绍了一种二级脱模机构。

• The runner system in the injection mold serves to convey the plastic melt coming from the nozzle of the injection molding machine to the cavity.

  注射模的浇注系统是指从注塑机喷嘴开始到型腔为止的塑料流动通道，它是模具的一部分，一般分为普通流道浇注系统和无流道浇注系统两大类。

• Slot type design is suitable for hot runner system and control box.

  插槽式设计适用于国外知名厂家热流道系统及控制箱。

• So it is important to develop the design software of hot runner system in injection molding.

  开发注塑模热流道辅助设计软件对提高热流道设计水平和效率具有重要意义。

• This paper studies the filling characteristic of the ring shape runner system based on the Large Qrifice Discharge theory and takes the hydraulic simulation test.

  本文根据大孔出流理论。对环形横浇道系统的充填特性进行了研究与水模拟试验。

• Plastic beauty and technical personnel in the successful summarizes the thousands of sets of hot runner system based on the successful development of the: small diameter nozzle wear;

  塑美技术人员在成功总结了几千套热流道系统经验的基础上又成功开发了：小直径耐磨喷嘴；

• We have specialists experienced runner, they can according to customer's products, you design a reasonable solution to ensure processing in injection molding hot runner system to maximize efficiency.

  我们拥有资深热流道专家，他们能根据客户的产品情况，设计出合理的解决方案，以确保热流道系统在注塑加工中能发挥最大效率。

• The matching areas of hot runner system and mold are reduced and pipe connection is adopted for pneumatic / hydraulic & cooling which make mold design and machining simpler.

  热流道系统与模具配合部分减少，气路、油管、冷却采用管道连接，模具设计加工更方便、更简单；

• Dongqiu hot runner system the variety specification diversification, meets the different necessary level need as necessary;

  东球热流道系统品种规格多样化，随时满足不同配套层次需求。

• Based on the experiments, the thermal balance of hot runner system and condition of temperature control around the pin point gate were fur - ther analyzed.

  在试验基础上对热流道系统的热平衡和点浇口附崐近的温控条件作了较进一步的分析。

• With development of mold industry, heat runner system is increasingly developing too.

  伴随着模具行业的发展，热流道系统也日益发展起来。

• Temperature control in hot runner system to control the temperature of the role.

  温控器在热流道系统中起到控制温度的作用。

• The runner system was ejected by deviating hole and spherical ejector pin automatically.

  浇注系统凝料的脱出采用了斜拉孔、球形拉料桿自动脱料机构。

• Design: adopt small draft Angle to reduce soldering, avoid sharp corner to reduce crack, optimize runner system to reduce erosion.

  模具设计：选用小的脱模角度减少粘焊，避免尖角应力造成开裂，优化流道设计减少沖蚀…更多。

• In order to guarantee uniform product weight and performances, flow balance of the runner system must be considered and all the cavities can be filled simultaneously under the same pressure.

  对多型腔模具设计来说，为保证各型腔制件的件重、性能等质量指标均匀一致，必须对浇注系统进行平衡分析，以使浇注系统流动平衡，即各型腔在相同压力下同时充满。

• A full set of heat runner system is made up of a balancing shunting plate, a heat spout and a high precision temperature controller.

  一套完整的热流道系统是由平衡式分流板、热嘴、高精度温度控制器组成。

• It is not always practicable, however, to have a balanced runner system and this particularly applies to moulds which incorporate a large number of differently shaped impressions.

  然而，只用平衡式浇注系统特别是用到多型腔模具中不是一直可行的。

• We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.

  我们充分利用CAE模流分析技术，模拟和优化模具浇道系统设计，提高零件的质量和减少试模次数及不必要的浪费。

• Two types of runner system of injection mould were briefly stated. A new thermal insulation runner system was developed and applied to the forming of large-scale injection molding parts.

  简述了注射模两大类浇注系统，介绍了一种新型的绝热流道浇注系统，并成功应用在大型注射件的成型上。