英语释义

• material used for stiffening something

片语

bracing boom加劲桿

Stiffener horizontal水平加劲条

eccentric stiffener偏心加劲桿

bracing piece加劲桿；斜撑

steel stiffener钢质加硬器

intermediate stiffener中间加强件；中间加劲肋

strap stiffener垫劲板条

bottom stiffener底部加强肋

conical stiffener翻译

pipeline stiffener管道支肋

heel stiffener后跟撑套

英汉例句

• the design parameters of chamber and stiffener of hollow blade model were analyzed.

  对空心叶片模型型腔和加强筋结构设计参数进行了分析；

• in the end the design formula of stiffener is put forward which can supply reference to engineering.

  最后提出了加劲肋设计公式，供工程参考。

• at the same time, the high web structure was researched, and the deformation and stability of the vertical and level stiffener was analyzed.

  同时，对高腹板结构设计进行了研究，对竖向与水平加劲肋的刚度及稳定性进行了计算分析。

• cut a small section of scrap stiffener, slip it behind the spokes, and draw in the stiffener area.

  削减的一小部分废料的加劲，支路，它背后的辐条，借鑒，在加劲区。

• the calculated results accord with the classical theoretical and experimental solution, therefore, the method provides a new and feasible way for local stability analysis of stiffener penstocks.

  计算结果可以较好地与经典的理论解及试验结果相吻合，为加劲环式压力钢管局部稳定性问题分析提供了一种新的可行方法。

• prepare a finite element model of the bend stiffener and the umbilical and apply the loads specified in the second step.

  为弯曲加强筋和脐带缆建立一个有限元数学模型，并在第二步施加规定的负荷…

• the factors which influenced the stability of steel-lined reinforced concrete pipe with stiffener rings are discussed.

  对影响带有加劲环的内衬钢管的稳定因素作了讨论。

• during the process of calculation, the relative ubiety between impactive location and stiffener is taken into account.

  在计算过程中，考虑了撞击点和加强筋的相对位置关系。

• in this paper 192 groups of girder model with the transverse stiffener were calculated with ansys finite element system software.

  利用有限元程序ansys计算了192组有横向加劲肋的薄腹板简支梁。

• this shows the stiffener glued to the disc.

  这表明，加劲粘到光盘上。

• the specimens are all steel beams with different stiffener ribs among the rings.

  试件均采用钢梁，并采用构造不同的环间加劲肋。

• next, apply a second coat to both the stiffener and the disc, let them dry for a few minutes, and then press together.

  接下来，适用于第二层都加劲和光碟，让他们干为几分钟，然后按下在一起。

• leave the foam on the wheel and mark the area where the stiffener will go.

  离开泡沫对车轮和马克的地方加劲将路要走。

• some crack extension probably developed from the unfused section of the butt weld across the thickness of the stiffener during transport and erection.

  有些裂纹可能在运输和安装过程中就从加劲 肋对接焊未熔透处开始发展。

• choose an appropriate thickness for the stiffener and spacer blocks to fit the rim width.

  选择一个适当的厚度，为加劲和间隔块，以适应环的宽度。

• effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.

  在循环加载试验中首次综合探讨了柱轴力大小、加劲肋构造措施等对连接性能的影响。

• the proposed rebar stiffener was found to be very effective in improving the static behavior of the composite connections.

  在试验的基础上，提出了钢筋加劲肋被发现是非常有效的提高了静态性能的综合连接。

• finally, several design points were emphasized such as transverse anti-overturning stability calculation, vertical stiffener layout, beam calculation, manhole and steel structure coating, etc.

  最后着重介绍的设计要点有：横向抗倾覆稳定计算、纵向加劲肋设置、横梁计算、人孔设置、钢结构涂装等。

• the codes and specifications of china in steel-structure field require that the bearing ability of shear force in panel zone must be sufficient and the inclined stiffener should be applied.

  但是设置了斜加劲肋的节点域的承载能力或者所设置的斜加劲肋应如何设计计算在所有这些规范和规程中均没有给出明确的说明。

相似词

harden(Harden) （美、英、加、瑞典）哈登（人名）

harshen使粗糙；使荒凉

strengthen变强；变坚挺

toughen变坚韧；变顽固

相反词

ameliorate变得更好

ease减轻，缓解；小心缓缓地移动；使容易；放松；（使）贬值；（股票价格、利率等）下降，下跌