英汉例句

• it is clear that, owing to the positioning of cooling tank 7 underneaththe stabilization oven b, the overall length of the apparatus can be keptcompact as just mentioned.

  很明显，由于冷却槽位于烘箱b的下部，使得装置的总体长度能够像刚才提到的那样紧密。

• this is a gauge to inspect whether the diameter of hole is larger than the specified mml or not , and this shall pass through the overall length of hole without any difficulty.

  本量规用于检查孔的直径是否大于被规定的最大实体尺寸，要能够轻易的通过孔的全长。

• although this version is not affected by the overall length of the string, it has its own weakness: long leading and trailing whitespace.

  虽然本实现不受字符串总长度影响，但它有自己的弱点：（它害怕）长的头尾空格。

• if you hunt together with a buddy always keep distance of at least three times the overall length of the speargun, shockline and shaft.

  和朋友一起射鱼的时候要注意保持距离，两人间至少要有3倍与speargun+矛线+矛长度的距离。

• for example, the switches may change the overall length of the antenna such that the frequency range of the antenna is changed.

  例如，该开关可以改变天线的总长，从而改变天线的频率范围。

• the wheelbase of the car grew 2 inches and the track width was also increased, while the overall length of the vehicle was slightly shorter than the previous generation.

  前后轮距增加了2英寸，左右轮距也略有增加，总长比s13略为缩短。

• numerical results indicated that the overall length of the isolator could be reduced by 30% for the isolator with bleed slots at the same back pressure.

  结果表明，通过流向狭缝抽吸隔离段角流区内的低能附面层，可不降低隔离段耐反压能力而将其长度缩短30%左右。

• numerous cognitive studies have indicated that the form and complexity of route instructions may be as important to human navigators as the overall length of route.

  许多认知研究表明，路径指令的复杂性和形式在人类导航中和路径的长度一样重要。

• in situations where the size of scrap or the overall length of scrap prevents the easy removal from the die, the scrap will be cut into smaller pieces that will aid in their removal.

  在因废料尺寸或权长阻止其从模具中移出的地方，废料都应该切成小段辅助其移出。

• the overall length of the connecting device (1) is exclusively determined by the length of the peripheral surface (6) serving for sealing in relation to the axial length of the annular ring (7).

  连接装置的总体长度仅由用于密封的壳面（6）的长 度相对于环形凸缘（7）的轴向长度来确定。