片语

void content model of composite复合材料空隙率模型

average void content平均含汽量

oil saturating air void content饱油空隙率

initial segment void content初始孔隙含量

Determination of void content空隙量测定

pore volume[分化] 孔体积；孔隙容积

uncompacted void content间隙率

core void content堆芯内空泡含量

void content of composite复合材料空隙率

void content of aggregate骨料空隙率

英汉例句

• the effect of the ply scheme on void content and mechanical properties of pp/gmt sheets has been studied in detail.

  针对pp/gmt材料，研究了铺层结构对片材孔隙含量和力学性能的影响。

• influences of type, bundle size and content of reinforcement on the void content in composites were also studied.

  同时，对增强纤维种类、丝束大小及其含量等对复合材料中空隙含量的影响也进行了研究；

• based on the experimental study, volume creep compliance, volume relaxation modulus and their main curves and initial void content of solid propellant are given.

  通过实验研究，给出了固体推进剂的体积蠕变柔量、体积松弛模量和材料的初始气孔率。

• based on the given value of the least void content, two different definitions for the ratios of the paste volume to the void content are presented and discussed.

  根据最小气孔率的给定值，分析讨论了浆体含量与气孔率之比的两个不同的定义。

• the electrospun fiber textile is characterized by high void content and great specific surface area, and the diameters of fibers are in nanometer scopes.

  电纺纤维织物的空隙率高、比表面积大、构架织物的直径处于纳米级别。

• in order to analyze air and steam permeability of bamboo fiber accurately, it's void content should be measured. computer programming of bamboo fiber porosimetry has been compeleted in this paper.

  为準确分析竹纤维的透气和透汽性能，需要测定竹纤维截面的孔隙率，本文即为该孔隙率测定进行了计算机程序设计。

• the composites cooled inside the hot-press machine has lower void content and higher crystallinity and tensile strength than that in the nature-cooling condit…

  在压机内冷却的方式比自然冷却方式制成的复合材料空隙率低、结晶度高、拉伸强力大。

• according to astm d792, the void content sample of composites was measured, and bending test of composites was performed on dcs500 tester by using three point loading system.

  按照astmd792 标準，测试各试样中的空隙率，并利用三点弯曲试验在dcs500试验机上测试试样的弯曲性能。

• an experimental investigation was conducted on asphalt portland cement mixture composites, the hot-mix asphalt with a high air void content filled with high performance cement grout.

  对高性能水泥砂浆灌入多孔沥青混凝土复合式路面材料进行了相应的混合料配比设计与性能研究。

• vontent of bituminous mixtures is recommended as a main index of the stability at high temperature and criterion of the void content is discussed and analysed.

  并提出以空隙率作为热稳生的主要指标，对空隙率的标準进行了探讨和分析。

• it is pointed out that unique characteristics of composites can be achieved through decreasing void content by controlling process parameters.

  指出，通过控制工艺参数、降低孔隙含量，可以制得性能优异的复合材料。

• aiming at the test of void content of carbon-fiber reinforced composite used in aeronautic industry, developed a portable ultrasonic non-destructive test system.

  针对航空工业碳纤维复合材料板材的孔隙率检测，研制了便携式超声无损检测系统。