英汉例句

• gliding setting: endurable and wear resisting slip fitting in slider part, adjustable gap. it is easy to assemble, and it makes little noise and has a long working life.

  滑桿部位采用滑动装置经久耐磨、间隙可调安装简洁、噪音低、 使用寿命长。

• the application of large sized fb 03 compound wear resisting steel plate under the condition of great sized wear by strong grains is described in detail.

  文中详述了fb -0 3型大面积复层耐磨钢板在大面积强磨粒磨损工况条件下的应用，并对直接和间接经济效益进行了核算。

• the recent development of the additive for pps wear resisting material is reviewed. the mechanism of the wear behavior of the composite is explained by means of sem and xps.

  按照耐磨材料的常用添加剂类别对pps摩擦磨损影响进行了详细的综述，并根据扫描电子显微镜（sem）和x射线光电子能谱（xps）等分析对其机理进一步解释。

• using the developed numerical simulation software of temperature field, the solidification process of wear resisting cast ball in metal mold was numerically simulated.

  利用温度场数值模拟软件对金属型耐磨铸球的凝固过程进行了数值计算。

• the hydrophobing luminous particle and a product thereof have excellent wear resisting property and good luminous performance.

  本发明所述的憎水发光颗粒及其制品具有优良的耐磨性和发光性能。

• by adopting a compound casting method, we have developed a kind of high wear resisting crushing bar, with low carbon steel interior, high chromium casting steel exterior.

  采用复合铸造法研制了一种芯部为低碳钢、外部为高铬铸钢的高耐磨碾齿，此碾齿用于玻璃厂破碎物料的粉碎机上，取得了良好的效。

• the comprehensive mechanical properties of the heat shears were analyzed and the microstructures and properties of the surfacing high wear resisting alloy layer were studied.

  分析了热剪刃的综合力学性能要求，并对表面堆焊高耐磨合金层的显微组织和性能进行了研究。

• and its products have good compactness, high intensity, regular corners, good wear resisting and frost resistant ability.

  该机生产出来的产品密实性好、强度高、边角整齐、耐磨及抗冻性好。

• it provided theoretical and practical bases for the development of new low cost low density heat resisting and wear resisting metal based composite by simple and convenient fabrication.

  为开发耐热、耐磨、成本较低、制备较为简便的新型低密度金属基复合材料提供了理论和实验基础。

• experiments show that the friction coefficient and wear rate between surface treated tubing or surface treated rod is lower, and the pair possess better wear resisting performance.

  试验证明，经喷涂工艺处理的管与抽油桿进行摩擦时，耐磨性能较好，摩擦系数与磨损率都较低。

• the test proves that the wear resisting and water proofing polyurethane materials with high-hardness and high…

  实验表明，在施工现场采用一步法工艺可获得高硬度、高强度、耐磨、耐水的聚氨酯材料。

• based on the inspection and analysis to the imported wear resisting components, the cutting blade and end bit of model d9l bulldozer were made using air cooled cast steel.

  在检测分析进口抗磨件基础上，采用空冷贝氏体铸钢制造了d9l推土机铲刃、铲角。

• the microstructure, wear resisting and abrasive mechanism of argon arc remelting area of alloyed casting iron camshaft is studied.

  研究了合金铸铁凸轮轴氩弧重熔淬火后强化层的组织、耐磨性及磨损机理。

• the wear resisting composite of cemented carbide-steel 45 is fabricated by using casting-in process.

  采用镶铸工艺制备了硬质合金-45钢双金属复合耐磨材料。

• it is superior to common cemented carbide on properties, such as high hardness, fracture toughness, flexural strength and higher wear resisting property.

  相比于普通硬质合金具有更高的硬度、断裂韧性、抗弯强度及优异的耐磨损性能，具有广阔的应用前景。

• it has advantages of good globality , high strength, wear resisting and anti-peel off.

  整体性好，强度高，耐磨、抗剥落等优点。

• and wear resisting property of this composites is tested by pin-on disc mode.

  采用销-盘式摩擦磨损试验机评价了复合材料的耐磨性能。

• a wear resisting alloy steel with high toughness has been studied.

  本文研究了一种高韧性的耐磨合金钢。

• it has high wear resisting and corrosion resisting.

  具有较高的耐磨性和抗腐竹性。

• stellite alloys are being sprayed upon metallic surfaces to enhance their wear resisting properties by various welding processes, or being, alternatively, used as casting parts.

  它们可用各种焊接工艺喷涂到易损部件的表面，也可制成铸件。

• molten iron in. medium frequency induction furnace was alloyed and cylinder lining of bnb wear resisting cast iron was made. the length of life of that lining was detected.

  对中频感应电炉熔炼的铁水进行合金化，制取硼铌多元合金耐磨铸铁缸套，并装机作了寿命考核。

• development of wear resisting surfacing electrode with high efficiency, high hardness and low cost;

  特别在中国，钢铁工业面临着不断增长的压力，迫使降低成本、改善环境。

• the relation between structure and wear resistance of low chromium wear resisting cast iron after 40% hot deformation and different cooling ways was investigated.

  研究了低铬耐磨铸铁经40%热变形及不同方式冷却后的组织与耐磨性的关系。