片语

air working chamber沉箱工作室

Working chamber volume l工作室容积

non working chamber非工作腔

Dimensions of working chamber工作室尺寸

Material of working chamber工作室材料

filled working chamber液体工作室

Size of working chamber工作室尺寸

Working chamber material工作室材料

In Working Chamber在工作室内

英汉例句

• The cold air in the working chamber can convent if the exhaust valve on top of the oven is open, the temperature is controlled constant automatically by digital display instrument.

  开启箱顶排气阀可使工作室温之冷空气得以对流交换，温度控制采用数字显示仪表自动恒温调节。

• Compressor working chamber is not interlink with the suction, exhaust orifice at the same time, without setting suction, exhaust valve, in this regard to reduce the intake, exhaust losses.

  压缩机工作腔不与吸、排气孔口同时相通，无需设置吸、排气阀，这一方面减少了进、排气损失。

• The working chamber is rectangular so as to achieve the maximum of effective volume.

  长方形工作室，使有效容积达到最大。

• The oven is made of thin steel sheets, fiberglass is inserted between the working chamber and outer plate of the oven as thermal insulation, there is a seal ring embedded in the door.

  烘箱由薄钢板构成，工作室与箱体外壳间以玻璃纤维作保温材料、门面镶有密封圈。

• The working chamber is made of high quality stainless steel sheet, with round corner modeling which is smooth, fluent, and easy to clean.

  工作室为优质不锈钢板，圆角造型、光滑、流畅、极易清洁。

• The working chamber of the machine is totally enclosed by organic glass to prevent dusting during pressing process. Meanwhile, the whole pressing process can be observed through a door.

  本机工作室采用有机玻璃全封闭开启门，能见压片全过程，并能防止压片时粉尘飞扬。

• Material phase change and thermally induced phase separation of materials are controlled by controlling the spray head and working chamber temperatures.

  通过对喷头温度和成形室温度的控制，实现了对材料的相变和热致相分离过程的控制。

• We founded the Island ceramic working chamber in 2010. we process and sell the hand made art ceramic, the main products of us are all the green glaze and the color glaze.

  2010年我公司成立大屿陶艺工作室，生产销售各种纯手工制作陶瓷工艺品，以青釉和花釉为主。

• The equipment includes the upper compression bar (3), the lower compression bar (4), the heater coil (6) and a working chamber (12), etc.

  设备包括上压桿(3)、下压桿(4)、加热线圈(6)、工作腔体(12)等。

• The relations of the lubricating oil amount in working chamber between sealing pressure, relative speed of motion, lubricating oil viscidity and gas pressure ratio were obtained by experiment.

  并通过实验得出了工作腔内润滑油量与密封比压、相对运动速度、润滑油粘度和气体压缩比等参数间的变化关系。

• The basic geometrical theory of the profile is established and the working chamber volumes are also derived.

  建立了该型线的基本几何理论，推导了工作腔容积。

• The air inlet can be switched on off with facility. Air-circulation system is made of low-noise import motor, suitable wind direction. The temperature in the working chamber is even.

  进风口开关自如，热风循环系统由低噪声进口风机和适合风道组成，工作室内温度均匀。

• Gear box has a separate lubrication, with the pump working chamber separated.

  齿轮箱中有独立的润滑，与泵工作腔隔开。

• The molding portion is composed of a plunger and a working chamber which is arranged below the plunger and is coaxial with the plunger.

  成型部分由柱塞和柱塞下方与其保持同轴的工作室构成。