英语释义

• work consisting of a piece of metal being machined

片语

workpiece centre工件中心

Prototype Workpiece样件

Workpiece Modeling工件建模

Workpiece thickness加工件厚度

master workpiece仿形样板

Workpiece Side工件侧

working parts工件

workpiece holder[机] 工件夹具

workpiece cooler工件冷却器

tapered workpiece锥形工件

英汉例句

• in this process, metal removal is achieved through combining the rotary motion of the milling cutter and linear motions of the workpiece simultaneously.

  在此工艺中，金属去除是通过铣刀的旋转运动和工件的直线运动的组合实现的。

• the primary method of imparting form and dimension to a workpiece is the removal of material by the use of edged cutting tools.

  对一个工件最基本的说明其形式和尺寸的方法就是告知通过刀刃对材料的除去量。

• this workpiece is no more elastic than that one.

  这个工件不比那个工件更有弹性。

• solar cells supply the energy for this workpiece detector.

  太阳能电池为工件探测器提供能源。

• as far as the direction of cutter rotation and workpiece feed are concerned, milling is performed by either of the following two methods.

  至于涉及到铣刀转动的方向和工件的进给，铣削可以通过下列两种方法之一进行。

• before cutting, he set a workpiece out.

  车削前他先在工件上画了线。

• the test consists of increasing air pressure system, workpiece pneumatic locating system, measuring system, electrical controlling system and so on.

  该试验台主要由气源增压系统、工件气动定位系统、测量系统和电气控制系统等组成。

• welding is facility and fast, no need warm-up, can weld directly on workpiece or machine, no need separation.

  焊接方便快捷，无须预热处理。可直接在工件上焊接和现场的机器上进行修复，不作分离工作。

• the measurement of roughness parameters of workpiece surface using the technique of light angular scattering distribution has been developed recently.

  用光的角散射分布技术测量工件表面的粗糙度参数是近几年来发展起来的新的测量技术。

• in not curing powder coating surface of workpiece solid pollutants is invisible, the film became very obvious once curing.

  在未固化的粉末涂装工件表面固体污染物是看不见的，涂膜一旦固化则变得十分明显。

• each of the cutting edges of a milling cutter acts as an individual single-point cutter when it engages with the workpiece metal.

  在铣刀切削工件金属时，铣刀的每条切削刃都象一单独的单刃刀具一样作用。

• most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.

  大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。

• in addition, the relationship between discharge energy and the deformation of workpiece cannot easily be figured by analytic method, which is also a big obstruction to the development of emf.

  另外，由于放电能量和工件变形量之间的关系不能用简明的数学关系表示，在很大程度上也阻碍了电磁成形技术的广泛应用。

• in the first case (horizontal spindle), the machine usually has a planer-type reciprocating table on which the workpiece is held.

  在第一种情况（卧式主轴），卧式磨床通常具有安装工件的刨床式往复工作台。

• the process of a pipe production is the following: a round cast workpiece is put onto a hot rolling line where it is cut, heated, stitched and rolled till a pipe of necessary size is ready.

  一个钢管的生产流程如下：圆管坯放在要被切割的高温轧制线上，继续升温，穿孔，轧制直到管坯大小基本成型。

• the removal of material from a workpiece is termed generation of form by machining , or simply machining.

  从工件上切除材料被称为机加工成型阶段，或者简称为加工。

• we have workpiece materials from a very soft, buttery consistency to very hard and shear resistant.

  我们的工件原材料从非常软，像黄油一样黏稠的到非常硬的有抗剪力都有。

• for rotation of the workpiece around the horizontal axis .

  对于周围的水平轴转动工件。

• since only a few of the cutting edges are engaged with the workpiece at a time, heavy cuts can be taken without adversely affecting the tool life.

  由于同一时间只有部分切削刃切削工件，因此可以在对刀具寿命没有不利影响的情况下承担重型切削。

• a great variety of workpiece may be produced without resorting to a machining operation.

  很多种类的工件可能不用选择机加工操作就可以做出来。

• the grinding strengthen technology is a new process engineering of surface heat-treatment, which uses a mass of grind heat produced in grinding process to handle workpiece materials.

  磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。

• from the point of stress of the workpiece , the difference at different guide angles is not so obvious.

  从工件的承受压力点来看，表现在不同倒角的差异是不明显的。

• then the pipeline moves the heated workpiece to a complex of rolling that consists of several stages.

  然后输送管道把这些加热过的管坯传到包括几个阶段的复杂的生产线上。