英语释义

1. a piece of work in process of manufacture

片语

work-piece dimension工件尺寸

crew work-piece乘务作业段

real work-piece实际工件

Work-piece thinkness工件厚度

work-piece stage工件台

work-piece rough工件毛坯

Work-piece Thickness板材厚度

work-piece constraint工件约束

英汉例句

• Fixed worktable can carry large work piece and keep high precision with moving electrode.

  工作台为固定式可承载大型工件，能保持高精密度，由电极(机头)移位加工。

• An apparatus and method for maintaining immersion fluid (212) in the gap adjacent the projection lens (16) during the exchange of a work piece (208) in a lithography machine (10) is disclosed.

  本发明公开一种设备和方法，用于在更换平板印刷机(10)中工件(208)期间，将浸没流体(212)保持在邻接投射透镜(16)的间隙中。

• Rough and open structure for soft and adhesive sticky work piece to grind.

  软而且粘的工件加工时用粗松的组织。

• Obtain through the experiment, the curve of relation between radius of work piece and the outline shape.

  经过实验得出，廓形面与工件半径的关系曲线。

• In traditional processing, the technology is made according to the work piece and procedure relativity is ignored, so that feasibility and rationality are both affected.

  常规的模具制造工艺规划系统只是从工件的角度编制工艺，忽略了工件加工过程中的工序相关性，从而影响了车间作业优化调度的可行性和合理性。

• The structure comprises a spray gun, a spray gun sliding rail, a work piece supporting bracket, and a control part;

  其结构由喷枪、喷枪滑轨、加工件支架及控制部分组成；

• In the static analysis, study mainly focused on the static stiffness and in obtaining the static stiffness distribution of the whole work piece table.

  在静态特性中着重分析了微进给平台的静态刚度，得出整个动平台的工作平面上的刚度分布图。

• Smaller chip sizes are more desired because such chips simplify the machining operation and facilitate more effective heat removal from the tool work piece interface than larger chips.

  较小的切屑尺寸比较大的切屑更被期望，因为这样的切屑使机械加工操作简化而且有利于从刀具工件接触面的更有效的热量排出。

• The difficulty in NC grinding is that the size of the work piece cannot be invariable because the grinding wheel will be abraded continuously in the grinding process.

  数控磨削加工的难点在于，由于砂轮在磨削过程中是不断磨损的，因此使得被磨工件的加工尺寸不能恒定。

• The surface of the hypoeutectic white cast iron of great wearable work piece in common use was treated by laser hardening.

  对要求高耐磨的大型工件常用的亚共晶白口铸铁材料进行了不同条件的激光表面强化处理。

• They come in many wire sizes depending upon the work piece and the type of finish that you want.

  它们的各种尺寸是由被打磨加工的物件以及所需的成品类型来决定的。

• The air claw is driven by the cylinder to move so as to throw the work piece to be detected, which can automatically carry out a dropping test.

  利用气缸驱动气爪运动来抛落待测工件，可自动地进行跌落试验。

• The cooling status on the surface of the work piece in a liquid medium was recorded by a video camera.

  用摄像记录了液态介质中冷却时试样表面的冷却情况。

• The form of distortion of work piece was studied, and the software rectification method of three coordinates measurement data was pot forward accordingly.

  研究了工件的变形形式，并依此提出三坐标测量数据的软件矫正法。

• But in producing spot, there are many factors influence machine precise directly or not directly, like work piece blank, allowance and allowance error etc.

  但实际加工现场，通常存在许多变量直接或间接地影响加工精度，如工件毛坯、余量及其误差等。

• The effect of grinding depth on work piece surface hardness and hardness layer depth is important factor.

  磨削深度是影响工件表面硬度和磨削淬硬层厚度的主要因素。

• In the thesis, first, the purpose-tool machine that introduced the design tool machine processes the work piece to process the craft and technique request.

  论文中，首先，介绍了设计机床的目的——机床加工工件的加工工艺和技术要求。

• According to characteristics of lathe cutting, two gratings are adopted to measure changes of the diameter when work piece being processed, then calculating the diameter.

  根据车削加工的特点，采用两个光栅测量工件加工时的外径变化，最后计算出工件直径。