片语

Address Translation Gateway地址转换网关

Address protocol translation地址协议翻译

local address translation局部地址翻译

network address port translation网络地址和端口翻译

NAPT Network address port translation网络地址和端口翻译

Address Translation Memory地址翻译存储器

Network Port Address Translation端口地址转换

NAPTNetwork Address Port Translation地址及端口转换

address s translation地址转换

英汉例句

• You might ask why address translation is used at all when it could all be written with 1:1 mapping.

  你有可能会问当全都可以设计成1：1映射的时候为何还要使用地址转换。

• As you can see, the NAT router stores the IP address and port number of each computer in the address translation table.

  就如你说见，nat路由器将每一台计算机的IP地址和端口号都保存在地址转换表中。

• The router then checks the address translation table to find if there is an entry existing for the inside local address with a corresponding inside global address.

  路由器然后查看地址转换表，看有没有一个条目是这个内部本地地址对应的内部全局地址。

• When address translation is turned on, the VMM requests the hypervisor to convert a virtual address to a correct logical address.

  当开启地址转换时，VMM将请求Hypervisor将虚拟地址转换为正确的逻辑地址。

• TLB cache entry reuse (cache hit) equates to quicker address translation and subsequently faster access to physical memory.

  tlb缓存条目重用(缓存命中)意味着更快的地址转换，还意味着对物理内存的更快的访问。

• The real address is the address generated when virtual to physical address translation is disabled.

  实地址就是当禁用了虚拟地址到物理地址的转换时所生成的地址。

• Win4Lin sessions can be configured with bridged networking or network address translation (NAT) networking.

  Win4L in会话可以配置为使用桥接连网或网络地址转换(NAT)连网。

• So, instead of catching and emulating access to physical devices below the hypervisor, new processors provide DMA address translation and permissions checking for efficient device passthrough.

  因此，新的处理器提供DMA地址转换和权限检查以实现有效的设备透传，而不是捕获并模拟对管理程序下的物理设备的访问。

• The most common one is a network address translation technique called NAT64, which can run on an appliance attached to a service provider「s network.

  最常用的是一个叫做NAT64的网络地址转换技术，它工作在可以连接到服务提供者网络的装置上。

• For this scenario, we will select Use network address translation (NAT).

  在这里，我们将选择usenet workaddress translation (NAT)。

• But since a typical entry in the address translation table only takes about 160 bytes, a router with 4 MB of DRAM could theoretically process 26,214 simultaneous translations!

  但是由于通常的地址转换条目是160字节，而一台有4Mb大小dram的路由器理论上可以同时执行26214个地址转换！

• It then looks in the address translation table to see which computer on the stub domain the packet belongs to.

  然后它查看地址转换表确定数据包是属于哪一台存根域中的计算机。

• The protocol translation procedure indeed depends on the type of address used, but its core concepts and associated issues are generally independent of any address translation mechanism.

  协议转换过程的确依赖所用的地址类型，但是协议转换的核心思想和所涉及的问题不依赖于任何地址转换机制。

• Pacifica also amends address translation with host and guest memory management unit (MMU) tables.

  Pacifica还可以使用宿主和客户内存管理单元(MMU)表来进行地址转换。

• As shown in Figure 7, we chose network address translation (NAT) because it allows our virtual machine to access networked resources without unnecessarily exposing it to other network machines.

  如图7所示，我们选择networkaddress translation (NAT)，因为它允许虚拟机访问连网的资源，而不必向其他网络机器暴露它。

• The operating system is not aware of the address translation within the hypervisor.

  操作系统并不清楚Hypervisor内部的地址转换。

• Since the NAT router now has the computer」s source address and source port saved to the address translation table, it will continue to use that same port number for the duration of the connection.

  由于nat路由器现在已经拥有了这台计算机保存在地址转换表中的的源地址和源端口号，它将会在有效期内继续使用同一个端口号进行转换。

• VideoCharger server has an option that allows for the address translation of the client (Note: IP address translation of the server is not supported by VideoCharger).

  VideoCharger服务器有一个允许客户机地址转换的选项（注：VideoCharger不支持服务器的IP地址转换）。