片语

RC APMP二段低浓磨浆

PRC APMP机械浆

APMP浆apmp

poplar APMP杨木APMP

apmp pulpapmp浆

conventional apmp常规apmp

APMP wastewaterAPMP制浆废水

英汉例句

• The application situation of APMP and problem existed in home and abroad are discussed.

  同时阐述了国内APMP的应用现状及存在的问题。

• The premium condition of pulping and bleaching has been found through the research on wheat straw chemi-mechanical pulping, and the fiber quality of wheat straw APMP has been analyzed as well.

  对麦草化机浆预处理的主要影响因素进行了研究，包括用堿量、温度、时间，并对过氧乙酸与过氧化氢组合漂白的效果进行了测试。

• A new poplar APMP pulping process and the main process conditions were studied, and the effect on pulp of all kinds of factors in the new process was analyzed.

  本文研究了一种杨木apmp制浆新工艺，确定了主要工艺条件，分析了新工艺条件下各种因素对纸浆性能的影响。

• The paper also provides a brief analysis of the mechanism of acidification in inhibiting brightness reversion of poplar APMP pulp.

  简要分析了酸化处理抑制杨木apmp纸浆返黄的机理。

• The APMP and SCMP are introduced in this article. The principle, merit and the analysis of the pulp performance are mentioned, and the application of pulp as well.

  综述了高得率制浆新技术中堿性过氧化氢化机浆（APMP）和磺化化学机械浆SCMP的制浆原理、制浆优点、纸浆性能的分析及纸浆的应用。

• This paper introduced the main questions in the production of aspen APMP, according to the practice of APMP system production of Jilin paper co.

  结合吉林纸业股份有限公司APMP系统的生产实践，介绍杨木apmp在生产中应注意的一些主要问题。

• The results show that, newsprint can be made from blending the pulps of P-RC APMP and unbleached DIP, filling and tinting properly at the same time.

  从试验结果来看，以P -RCAPMP浆与未漂dip浆为主、适当进行加填及调色进行配抄，可以抄造出较高档的新闻纸手抄片。

• The dosage of NaOH, the size of wood thread, and the intensity of refining are the main factors effecting on the APMP pulping.

  用堿量、木丝粗细和磨浆强度是影响apmp制浆的最主要因素。

• This paper discusses the P-RC APMP process and its characteristics. The P-RC APMP pulp of different materials and the paper properties are compared.

  本文论述了堿性过氧化物盘磨机械法制浆工艺流程及特点，对比了不同原料P-RCAPMP浆成纸的物理性能。

• This paper introduced the main questions in the production of aspen APMP, according to the practice of APMP system production of Jilin paper co., Ltd.

  结合吉林纸业股份有限公司APMP系统的生产实践，介绍杨木apmp在生产中应注意的一些主要问题。

• Kraft pulping and APMP pulping of the xylem of hybridized citron tree were investigated.

  对杂交枸树木质部进行了硫酸盐法和APMP制浆性能的试验。

• The results show that the Taiqing poplar 1 can be made to APMP pulp with good qualities in the suitable dosage of chemicals and the suitable conditions of refining.

  结果表明，太青杨1号在适宜化学药品用量和磨浆条件下，可制得具有较好性能的APMP浆。

• The author advocates establishing APMP industrial e-business platform, and billing data warehouse by using data mining.

  本文提出了建立汽摩配行业商务平台，在数据挖掘基础上构架行业商务数据仓库。

• The excellent light paper and newspaper could be made with the mixed pulp of APMP and soft wood chemical pulp.

  杂交构树APMP与适量的针叶木化学浆配抄，可以制得优等轻型纸和新闻纸。

• The results show that poplar APMP pulp treated by sodium borohydride could be brightened and stabilized significantly.

  结果表明：硼氢化钠处理杨木漂白化机浆不但能够显着改善其白度稳定性而且对纸浆具有漂白作用。

• Because of this, application potential of straw APMP pulp may be limited to low brightness grades such as newsprint and low brightness paperboard.

  正因如此，后者仅限于生产低白度浆料，用于抄造新闻纸和低白度纸板。

• This paper reports the study of APMP using mixed hardwood, which grows in the secondary forest in Liaoning eastern mountain area.

  对辽宁东部山区次生林中的混合硬杂木，利用APMP制浆方法进行了研究。

• The study on anaerobic internal circulation reactor's biodegradation of the APMP wastewater is presented.

  本实验进行了厌氧内循环反应器处理杨木APMP制浆工艺废水的研究。

• Firstly, we studied the changes of chemical ingredients and fiber morphology of Bambusa Chungii during APMP pulping and supplementary bleaching.

  首先，对粉单竹apmp法制浆和补充漂白前后，竹材的化学组分和纤维形态的变化进行了研究。

• The structure and printability of papersheet from eucalyptus globulus APMP were studied. The strength and optical properties of papersheet were also discussed.

  对蓝桉APMP印刷纸纸页结构与印刷适性进行了探讨，分析了配抄纸页的强度与光学性质。

• The APMP of xylem at different ages has small difference in physical properties.

  不同树龄杂交构树的APMP浆物理性能差别较小。

• Optimum pretreatment conditions of APMP and SCMP of reed were selected through orthogonal or conditional experiments.

  通过正交试验优选出芦苇apmp和SCMP的适宜预处理工艺条件。