英汉例句

• When the strain is below 0.29, the average grain size decreases obviously with the increase of strain.

  当应变小于0.29时，平均晶粒尺寸明显地随应变增大而减小；

• Through MC simulation test, the relation of average grain size and Monte Carlo steps was established and the parameters of MC model were work out by the method of regression analysis.

  运用MC模拟试验，建立了平均晶粒尺寸与蒙特卡罗步数之间的关系，利用回归分析方法确定了MC模型常数。

• Nevertheless, after the strain reaches 0.29, the average grain size decreases slowly with the increase of strain.

  当应变达到0.29时，平均晶粒尺寸缓慢地随应变增大而减小。

• The increase in average grain size of a polycrystalline material, for most materials, an elevated-temperature heat treatment is necessary.

  在多晶体材料中晶粒平均尺寸的增加，对大多数材料来说，这需要在一定温度下进行热处理。

• The increase in average grain size of a polycrystalline material; for most materials, an elevated-temperature heat treatment is necessary.

  多晶体材料中晶粒尺寸的增大，对大多数材料来说，晶粒长大只在升高温度加热的时候发生。

• The use of the die successfully produced superfine grain columnar material with average grain size as 1.

  利用该模具，可以在实验室制备具有超细晶粒度的板状材料。

• Ultrafine-grained 2J4 hysteresis alloy processed by equal-channel angular process(ECAP), has the average grain size approximate 0.

  利用等通道弯曲挤压的方法得到的晶粒平均尺寸大约为0。

• The relationship between the average diameter of mill balls and the average grain size of grinding materials in ball mill is analyzed.

  介绍研磨体级配的平均球径与研磨物料平均粒径的关系。

• Granulometric parameters show that: the average grain size in the Bayan Har basin becomes coarser with time and the sorting becomes better.

  粒度参数特征表明，巴颜喀拉山盆地由早到晚平均粒径变粗、分选变好。

• It is shown that the surface roughness is mainly related with the average grain size and feed per wheel revolution for the brittle materials such as single silicon.

  研究结果表明，对于单晶硅等脆性材料，其表面粗糙度主要与砂轮的平均磨粒尺寸、进给量等因素有关。

• The average grain size of nc-Ni films are calculated by using XRD. The deposition and growth mechanism of nc-Ni films are discussed also.

  利用XRD估算纳米镍薄膜的晶粒平均尺寸，探讨纳米镍薄膜沉积生长机理。

• It is showed that the surface roughness is mainly related with the average grain size and feed per wheel revolution for the brittle materials such as single crystal silicon.

  研究结果表明，对于微晶玻璃等脆性材料，其表面粗糙度主要与砂轮的平均磨粒尺寸、砂轮速度、进给量及磨削深度等因素有关。

• The influence of the substrate thickness on cube texture, misorientation Angle and average grain size was studied.

  主要研究基带厚度对其立方织构、晶界角分布以及晶粒尺寸的影响。