片语

original axial direction原始轴向

axial direction magnetic field轴向磁场

flow in axial direction轴向流

axial l direction轴向

high speed axial direction高速轴向

rupture along axial direction轴向开裂

radial and axial direction径向及轴向

axial direction dynamic analysis轴向动力分析

basin axial-direction盆地轴向

longitudinal direction纵向流变；轴向

英汉例句

• but when the heat load of rotor increases, the ratio of the heat bring by the axial direction gas-flow to the total heat load decreases.

  但随着转子发热量增大，气隙轴向风量带走热量占总热量的比例下降。

• a molding is formed by pressing magnetic powder placed in a die by a single punch placed at one side in the axial direction and two punches parallelly placed on the other side in the axial direction.

  借助于设置在轴向一侧上 的单个沖模和在轴向另一侧上并列配置的两个沖模，通过挤压放置在模具 内的磁性粉末来进行模制。

• test results show that the concrete-filled steel tube and the reinforced concrete deform simultaneously in the axial direction before and at the peak value of axial compressive force.

  试验结果分析表明，峰值承载力前和达到时，钢管和管外钢筋混凝土纵向变形一致；

• the connecting device (1) is therefore especially compact in the axial direction and allows for a bigger sealing length.

  由此，连接装置（1）在轴向方向上特别紧凑并且可提供较大的密封长度。

• the axial direction expresses the compresses deformation and the radial direction expresses swelling deformation when stress is greater, but the deformation is very little.

  应力较大时，轴向变形表现为压缩变形，而径向变形则表现为膨胀变形，但变形量都很小；

• timing hand-grip is moved in axial direction to realize multilevel timing, reversing valve is controlled with reversing hand-grip to realize reversing output.

  用调速手柄作调速轴向移动，实现多级调速，用换向手柄控制换向阀，实现换向输出。

• with this constitution, a high light extraction efficiency, a high radiated light intensity, a high axial direction luminous intensity, and a high luminance can be realized.

  通过这样的结构，能够实现高光取出效率、发射光强度、轴上光度和亮度。

• the axial direction adjustment of the roller is realized by the standard spiral elevator;

  轧辊轴向调整由标準螺旋升降机实现；

• it was observed, that the main forces were acting along the axial direction and not along the radial direction.

  我们发现，作用力方向主要位于轴位上，而不是沿放射状分部。

• the driver bit (4) has a bottom portion which is movably engaged in the axial direction with a central through hole (14) of a drive gear (13) arranged below a striking cylinder (2).

  螺丝批头（4）的下部可移动地嵌合在驱动齿轮（13）的中央的通孔（14）中，所述驱动齿轮 （13）配置于上述打击气缸（2）的下部。

• at first, time-field curves of the images' axes were analyzed according to their characteristic points and the axial direction registration was realized.

  首先，根据图像中轴的特征点分析其时域曲线，实现中轴的轴向匹配；

• through controlling the axial direction of the nonel tube to produce the strong reflection shock wave, the ideal initiating process can be obtained.

  控制导爆管轴向方向获得较强的反射沖击波可达到理想的起爆过程。

• a helix antenna was presented together with low power rf amplifier, as the frequency fitted, the axial direction can obtain largest radio energy.

  采用小尺寸低功耗的射频芯片结合实际环境设计出螺旋结构天线，选择合适的频率，天线在轴向方向得到最大的辐射能量。

• the invention is formed by a steel wire being spirally winded up, and the diameter of the steel wire is changed along the axial direction of the steel wire.

  由一根钢丝以螺旋 状卷绕构成，钢丝的直径沿钢丝的轴向改变。

• the cyclo- hoop effect which steel tubular has exert to the concrete shows the character of heterogeneous in the arch rib section, the same to the axial direction .

  在钢管混凝土拱肋断面上，钢管对内填混凝土的环箍效应具有非均匀性，在拱轴方向上环箍效应也呈现非均匀性。