英语释义

• covering consisting of a plate used to cover over or close in a chamber or receptacle

片语

cover & plate assy封面，封皮；盖子；掩蔽物;幌子，借口

COVER BATTERY PLATE电池盖板

cover r plate盖板

glass cover-plate玻璃盖板

Cover-Plate Connection盖板节点

hatch cover top plate舱盖顶板

hatch cover skirt plate舱盖边板

concrete cover-plate砼盖板

BACK COVER LOCK PLATE后盖开関锁板

英汉例句

• cable inlet for bottom elevated cover plate :the cover plate can be dismounted to drill holes and the seal rings are provided.

  底部凸台盖板进线，盖板可预先拆下开孔，并配有密封圈。

• loosen bolts on groove coupler and remove groove coupler and cover plate from body.

  松开沟槽连接器上的螺栓,从阀体上拆卸沟槽连接器和盖板.

• disconnect the hose from the bottom cover plate to the relief valve.

  断开底部盖板到安全阀上的软管.

• remove all nuts and bolts from cover plate and take off plate.

  从盖板上拆卸所有螺母和螺栓,然后将盖板拿开.

• reattach cover plate to make an air and water tight seal.

  重新固定盖板,并紧密密封防止空气和水通过.

• the hydro-efflux hammer series including lung valve type, cover plate type, connecting body type, and sparrow type, and have similar working principle to the traditional hammer.

  新型液动射流沖击器包括肺形阀式射流沖击器、盖板流阀式射流沖击器、连体阀式射流沖击器、麻雀型阀式射流沖击器，其工作原理与传统射流沖击器类似。

• the injection mould for a duplicator cover plate is designed.

  设计了复印机盖板的注塑模具.

• in the paper, tamp and bulb pile and its working procedure and application in the foundation of big ship cabin cover plate workshop are presented, then the experiences are expounded.

  介绍了夯扩桩及其施工工序，以及在某大型船舱盖板车间地基中的应用，阐述了自己的经验和体会。

• the supporting part is fixedly connected with the joint in order to fold the convex-bubbled component and cover sheets for the cover plate behind the protection part.

  支撑部与接头固定连接，以便折叠凸泡组件和保护部之后罩板覆盖薄片。

• motorcycle「s crankcase cover plate is its engine」s major component, which would vibrate to radiate noise under the force of the crankcase when the motorcycle「sengine operates.

  摩托车的曲轴箱盖是发动机的主要构件，在摩托车发动机运转时，会受到曲轴作用的激振力而发生振动向外辐射噪声。

• bladder is attached to tank at both ends. to remove bladder from tank remove all bolts from cover plate and take off plate.

  内胆附在膨胀罐的两侧。要从膨胀罐上拆卸内胆，就要先从盖板上拆卸所有螺栓并将盖板拿开。

• cooling condition of the market, the developers choose to cover plate .

  冷却条件的市场，开发商选择盖板。

• or texture of soft flexible rubber airtight floor drain in the cover plate on.

  或用质地软有弹性不透气的橡胶板遮盖在地漏上。

• caution: do not loosen nuts on cover plate - this will result in loss of pre-charge.

  警告：不要松开盖板上的螺母-这样做可能会导致预充气压力的损失。

• application of using folding plate structure in stead of underground chennel cover plate has tested successfully at guzhuang mine and got perfect economy benefit.

  采用折板结构代替暗渠盖板（箱涵或桥梁）结构，是一种新的尝试，在固庄煤矿试验成功，并取得良好的经济效益。

• the forming technology for the cover plate, the structure of the die for the cover plate and the die manufacturing process were introduced.

  介绍了盖板零件的成形工艺、模具结构及模具制造工艺，用二次线切割取代加工中心，经济实用，精度。

• this article puts forward to lay a cover plate in the welding of the titanium sandwich pressure vessel and it also presents the structure and welding practice of the cover plate.

  文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接，并具体介绍了盖板的结构及其焊接方法。

• he disclosed that the company has been investing for a long time no air cover plate , this year and next year will not be considered as the focus of the plate .

  他透露，该公司已投资了很长一段时间没有空气盖板，今年和明年将不会作为板块的重点考虑。

• the injection mould for a duplicator cover plate is designed.

  设计了复印机盖板的注塑模具。

• reattach cover plate to make an air and water tight seal.

  重新固定盖板，并紧密密封防止空气和水通过。

• if you open the cover plate of your cell phone you」ll see a rectangular lcd on its backside.

  把手机的盖板打开来，背面就是一整片长方形的液晶萤幕。

• drill & tap for m16x2-1.38 deep npt, 16 places for cover plate mounting screw.

  鉆孔，攻出一只m16x2-1.38深npt螺纹，16处，该螺纹应与盖板固定螺丝配套。

• in addition, one-inch horizontal cover plate can prevent accidents.

  此外，一英寸的板块横罩可有效防止发生意外。

• the forming thethe structure of the diethe cover plate and the die manufacturing process were introduced.

  文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接,并具体介绍了盖板的结构及其焊接方法.

• the prestress of steel girder by high strength cover plate can raise stiffness and save steel, with simple configuration.

  焊接高强钢盖板的预应力钢梁构造简单，刚度较大，节约钢材，是一种值得推广的结构型式。

• the ultrasonic transducer vibrates longitudinally, its front cover plate links up with a half wavelength circular conical horn to increase the amplitude of the output end of the ultrasonic transducer.

  该超声换能器采用纵向振动方式，其前盖板连接了一个半波长圆锥形变幅桿，以增大超声换能器输出端的振幅。