英汉例句

• the ambient temperature is different from the kinds and proportions of curing agents are also different.

  环境温度不同，固化剂的种类与比例也不同。

• two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.

  合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。

• some methods of research on waterborne epoxy resin are introduced systemically. and curing agents for waterborne epoxy resin is described in this paper.

  系统介绍了水性环氧树脂的研究方法，并比较了各种方法之间的优劣，简要介绍了水性环氧树脂的固化。

• solvent-based and waterborne blocked isocyanate curing agents are prepared by blocked reaction of prepolymers, which is resulted from tdi and tmp, with meko or alcohols-ethers mixtures.

  以甲苯二异氰酸酯、三羟甲基丙烷为原料合成预聚物，分别与甲乙酮肟和多种醇醚类混合物进行封端反应，合成溶剂性和水性封闭异氰酸酯固化剂。

• besides the character of host strains and the molecular weight of the plasmid, the efficiency of curing was also related to the concentrations of curing agents and the time of treatment.

  除宿主菌的特性及其所含质粒分子量大小之外，消除率还与消除剂浓度、作用时间有关。嵌合染料适用于消除大肠桿菌中的质粒。

• its composition is 60 to 80% asbestos and 10 to 20% of the rubber, and fillers, curing agents .

  它的组分是水力控制阀60～80%的石棉和10～20%的橡胶，以及填充剂、硫化剂等。

• low viscosity reactive casting resin. recommended with amine and polyaminoamide curing agents for low voltage electrical and electronic applications.

  低粘度浇铸树脂，建议与胺类和聚肽胺类固化剂组合用于低压电器。

• the preparation methods of waterborne epoxy resin, the kinds of waterborne curing agents and the methods for choosing auxiliary , pigments and fillings in the system were introduced.

  介绍了该体系中水性环氧树脂的制备方法、水性固化剂的种类以及助剂和颜填料的选择方法。

• the review shows the technical points of(epoxy) hot-melt prepreg on the(reasonable) combination of resin matrix, matching of curing agents and(accel…

  表明环氧树脂热熔预浸料研制的技术关键是选择合理的树脂体系组合，有较长潜伏期的固化剂和促进剂的匹配及合适的催化剂。

• in this paper the rheological properties of pp/hdpe/epdm ternary blend dynamically cured by different curing agents and curing time were studied.

  本文采用不同的硫化剂。不同的硫化时间，对动态硫化的pp/hdpe/epdm三元共混物的流变性能进行了研究。

• in this article are discussed the effects of three kinds of acid anhydride curing agents on the casting technology of epoxy resins as well as on the properties of cured resins.

  本文着重探讨用于环氧浇铸的三种酸酐固化剂对浇铸工艺及其固化物性能的影响。

• isocyanate curing agents which when heated or reacted with hydroxy functional polymers giving urethane coatings.

  异氰酸酯固化剂在加热的情况下与羟基聚合物反应形成聚氨酯涂料。

• tests of several kinds of typical curing agents often used in china were made for their applications. their influences were analyzed and suitable one was indicated.

  对国内常用的几种典型固化剂进行了系统的应用测试，分析了它们对环氧树脂类涂料性能的影响，并提出适合该类的固化剂。

• the compatibility of the modified alkyd resin with curing agents and acrylic resin were reviewed.

  研究发现：改性后的醇酸树脂与固化剂相容性很好，与丙烯酸树脂相容性较差。

• organic compounds. a structure sometimes used in curing agents in epoxy powder coatings.

  有机化合物，一种应用在环氧粉末涂料作为固化剂使用的一种化学结构。

• new process on phosphorus curing agents of epoxy resin are reviewed.

  综述了含磷环氧树脂固化剂研究的新进展。

• recommended with amine adducts and polyaminoamide curing agents for solvent containing cold-curing chemical resistant coatings and marine paints.

  与胺加合物及聚肽胺固化剂组合，生产溶剂型抗化学腐蚀油漆及船舶油漆。

• often used as curing agents in epoxy compounds.

  常被用作环氧树脂固化剂的化合物。

• a resin system is composed of resins, curing agents and accelerants.

  树脂与固化剂、促进剂等混合后组成树脂体系。

• when adding proper curing agents and neutralizers, excellent water-soluble thermosetting acrylic varnishes and paints could be made.

  选择合适的固化剂、中和剂等，制得性能优良的水溶热固性丙烯酸清漆和色漆。

• the application aims at solving the technical problem that the curing agents in the prior art can not have high curing properties and high emulsification properties simultaneously.

  所述的这种用途要解决现有技术中的固化剂不能同时具有高固化性能和高乳化性能的技术问题。

• epoxy powdered coating with low glossiness can be prepared by adding two curing agents with different reaction activation.

  采用两种不同反应活性的固化剂，可制得低光泽的环氧粉末涂料。

• tin soaps. often used in curing agents in condensation curing compounds.

  锡及化合物。常常使用于缩合固化的过程中。