片语

electromechanical drive and control机电传动与控制

Drive slip control驱动防滑电控系统

Drive dynamics control unit传动动态控件

Drive converter control传动逆变控制

Drive and control circuit驱动控制电路

Electrical Drive and Control电力传动与控制

Drive Dynamics Control System动态驾驶控制系统

Direct Drive Volume Control直驱式容积控制

英汉例句

• in this thesis, we studied a canonical volumetric display system, of which the load character and drive control are mainly researched.

  本文以自行研制的正则体积显示系统的机械扫描子系统为研究对象，主要研究了该系统的负载特征及驱动控制。

• it can be applied to real-time, multi-microcomputer communication for most of distributed single-chip microcomputer electric drive control systems which control and coordinate the drive speeds…

  可应用于多电机传动及协调控制的分布式单片机电气传动控制系统中的多机实时通讯。

• the development of home - made electrical drive control systems of oil-drilling rig is intro-duced, several arrangement modes are compared, the ways for improving the system reliability are studied.

  对国产电驱动鉆机控制系统的发展进行介绍，对几种配置方式进行比较，对提高系统可靠性的思路做了探讨。

• application shows that this drive control system has higher dynamic performance and is capable of close-loop control and communication and ease of network configuration and maintenance.

  实际应用表明，该控制系统动态性能高，适合于复杂的闭环控制和通信任务，易于进行网络配置及维护。

• in this paper, a speed-error feedback method is introduced based on the double-motor synchronizing drive control system.

  以双电机同步联动控制系统为例，提出了一种「差速负反馈」同步联动控制方案。

• available in either thru-shaft or end-of shaft models, it is specifically designed to provide feedback for ac and dc drive control systems.

  可在任何直连轴或最终的轴模型，它是专为交流和直流传动控制系统的反馈。

• the construction, control and scheme selecting of the electric drive control system of electric drive oil drilling rig have been deeply studied in this paper.

  针对电驱动石油鉆机电气传动控制系统的构成、控制、方案选择进行了深入研究。

• the application of ac servo system in the subsection drive control is also discussed, so that we can improve the control precision and the level of automatism.

  分析了切纸机传动控制系统的现状以及交流伺服在切纸机分部传动控制中的应用，目的在于提高系统的控制精度和自动化程度。

• dc drive control module can function as increasing efficiency and accuracy and reducing error rates in tube-welding drive system. details of the module are described.

  直流传动控制模块在焊管机组拖动中，具有提高效率和準确度以及降低差错率等作用，介绍了使用该控制模块的有关问题。

• the experimental results show that the circuit designed is simple and reliable, the position signals measured match the requirements of the ac drive control system with high performance.

  试验结果表明，该电路简单可靠，所测得的位置信号完全满足高性能交流传动控制系统的要求。

• the author present rcp real-time simulation used in electric drive control system based on dspace, dspace, a simulation platform based on matlab, can meet the basic requirements of real-time system.

  本文介绍了一种进行电气传动控制系统实时在线仿真设计的新方法。

• pneumatic, hydraulic, seals and drive control technology, industrial automation, fluid equipment, etc.

  气动、液压、密封件及传动控制技术、工业自动化、流体设备专区；

• developing with the electronic and the micro-electronics technology, the basal mode of modern drive control has developed from continuous analog control to 「dsp-ipm-motor」 discrete digital control.

  随着电力电子与微电子技术的发展，电力传动控制的基本模式由连续模拟控制形式逐步发展为「dsp—ipm—电动机」的离散数字控制模式。

• a cooling drive control section (11) controls drive of the cooling apparatus (3).

  冷却驱动控制部（11）控制冷 却装置（3）的驱动。

• this paper deliberates some technical problems about multi microcomputer distributed drive control system.

  本文研讨了多微机分布式传动控制系统中的几个技术问题。

• when the foot pedal is in a third position, the position of the work tool control is maintained and the position of the ground drive control is maintained.

  当所述脚踏开关在第三位置时，所述作业工具控制器的位置被保持并且所述地面驱动控制器的位置被保持。

• has simple mechanical structure and is controlled by a motor and zero-max drive control system to get high speed and low tension edge winding quality.

  本机具备简单的机械结构和无级变速的精确控制，可以在高速运转条件下进行低张力收卷。适用于分切机、复合机、制袋机多种机型。

• the arrangement of rig electric drive control system and the level of electric drive rigs made are presented, the farther development on electric drive rigs are also given.

  介绍了鉆机电传动控制系统的构成及国产电驱动鉆机的水平 ，并探讨了电传动鉆机进一步的发展。

• the paper introduces a speedy effective way how to solve winch location jump by modifying sd drive control and plc program after main hoist of panyi coal mine hoists appears depth indication fault.

  提升机是矿井主要机电设备之一，确保其安全正常运转，提高工作效率，降低故障影响时间至关重要，文章介绍了潘一主井提升机出现深度指示故障后通过修改sd传动控制及plc程序解决绞车位置跳变故障的一种快速有效的方法。

• this paper introduces a general-purpose fault diagnosis appearance for electric drive control system.

  介绍了面向传动控制系统的通用故障诊断装置。

• when the foot pedal is in a first position, the work tool control and ground drive control are not affected.

  当所述脚踏开关在第 一位置时，所述作业工具控制器和地面驱动控制器不受影响。

• link is an ultra high speed distributed drive control system.

  link是一个分布式的超高速驱动控制系统。

• a suit of electric drive control system of electric drive oil drilling rig is developed with market and user request.

  针对市场需求及用户实际使用情况，研发了一套电驱动石油鉆机电气控制系统。