英汉例句

• It has showed that the feeding speed of mixed monomers, temperature for polymerization and the dosage of initiator are main factors controlling the molecular weight.

  结果表明，单体加入速度、聚合温度及引发剂用量是决定聚合物分子量的主要因素。

• However, if the effective descaling is carried out, it is very important to control the feeding speed of steel billet, the flow rate of water and the pressure of water.

  但要实现有效除鳞，控制钢坯速度、水的流量及水压大小至关重要。文章介绍了高压水除鳞控制系统的结构与功能。

• Completely solve the model, artificial feeding speed accurate cuisine.

  完全解决人工放料的模式，料理速度準确。

• Stop control yarn feeding speed during stop tension.

  停止控制在停止张力期间的纱补浇速率。

• The influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.

  讨论了砂带粒度、砂带线速度、接触轮硬度、磨削深度和磨削进给速度对表面粗糙度的影响规律。

• Special design mechanical relaxation installment, Achieves the ideal effect in the feeding speed and the punch press coordination.

  特别设计的机械式放松装置，在送料速度与沖床配合上达到理想的效果。

• Flash can be continual and steady, and then, the good welding joints could be obtained by properly controlling feeding speed of shifting unit of rail continuous flash welding.

  有效地控制钢轨连续闪光焊的动力柱送进速度，可以使整个焊接过程保持连续和稳定的闪光，从而获得优良的焊接接头。

• Special design mechanical relaxation installment, Achieves the ideal effect in the feeding speed the punch press coordination.

  特别设计的机械式放松装置，在送料速度与沖床配合上达到理想的效果。

• The experimental results show that the samples produced at lower precipitation temperature in a higher feeding speed have higher specific surface area but the crystallite shape appears imperfect.

  结果表明：降低沉淀温度和提高加料速度有利于获得较大比表面积的产品，但不利于产品颗粒晶型的完整化。

• The conversion of chlorine decreased when the feeding speed of sample was too high or too low.

  进样速度过高或过低，都会使氯转化率降低。

• The stepless variable speed motor is used for the feeding mechanism. The feeding speed can be adjusted for the different material, thus achieving the most ideal capacity and quality.

  送料机构选用无级变速，可根据不同物料，调节相应的进料速度，从而得到最理想的产量和质量。

• The feeding speed of shifting unit of welding machine is one of the most important factors of rail continuous flash welding quality.

  影响钢轨闪光焊接头焊接质量的因素很多，其中焊机动力柱的送进速度就是重要因素之一。

• To increase rotary speed and feeding speed of cutting tools is a trend in the development of the wood machining equipment.

  增加刀轴转速，提高进给速度是当今木材加工设备发展的方向之一。

• The test results showed that raw material, precipitation method, feeding speed and Si modification had great influences on dispersion property.

  结果表明，不同原料路线、不同制备方法、不同加料速度以及样品中是否含硅等都对酸分散性能有较大的影响。

• Vibrating feeder: installed under the hopper and feeding speed can be adjusted based on real situations. It is stainless steel where it is touching the powder.

  振动喂料器：安装在料斗下部，可根据实际情况调节进料速度，与料接触部分为不锈钢。

• Influences of different radial and axial feeding speed on the radial and axial rolling force, growth rate of diameter and temperature have been systematically analyzed and proved by trials.

  同时对不同的径向和轴向进给速度对径轴双向复合轧制过程中轧制力，直径增长速率及温度分布的影响进行了系统分析，并进行了相应的实验验证。

• The influence of temperature on yield and colour of product in bromination of benzene ring as well as the influence of bromine feeding speed on yield of brominated sidechains were investigated.

  考察了反应温度对苯环上溴代产物收率和色泽的影响以及溴素滴加速度对侧链光溴代产物收率的影响。

• The feeding speed can be adjusted to synchronize with the press automatically.

  依出料速度之需要，自动调控送料时间，配合沖床的沖压速度。