片语

front aperture axle shaft前桥

dual front-axle双前轴

front aperture axle differential前桥差速器

forward shaft前轴

front drive axle前驱动桥

front steer axle前转向桥

front aperture axle suspension前桥悬架

front steering axle前转向桥

steerable front drive axle可转向的前驱动桥

英汉例句

• practice testify that fe simulation of roll forging for front axle can reduce the time over 30% of process design and procedure debugging and be helpful to response the market demand.

  实践证明，采用有限元技术研究前轴成型辊锻工艺，能减少工艺设计和工艺调试时间30%以上，有利于快速市场响应。

• users can realize the rapid designing on the basis of the design template of the front axle and the command of the special menu system.

  用户可以通过前轴设计模板和使用前轴专用菜单命令快速完成前轴总成的设计过程。

• the front axle load determines which of the three different power-steering systems are used.

  根据前桥的负载，有三种转向助力系统可供选择。

• drive to the front axle in high range is now engaged by pressing down on a one lever while low range is selected by pulling another lever rearward .

  在高范围中的前轴现在被放下来，与一根杠桿相连接，而从低范围中选择的另一个杠桿向后拉。

• it is located in front of the front axle close to the wheel centre line, and enhances the car「s very agile handling by its direct transmission of the steering forces.

  它位于前轴靠近车轮中心线面前，增强了其在指导部队的直接传输赛车的非常灵活的处理。

• if the car」s on-board computer concludes a collision is imminent, it will fire an airbag located under the front axle that will press a high-friction surface against the ground.

  如果汽车内置电脑系统判断即将发生相撞，在前车轴下的防滑气囊就会立即展开，在轮胎和地面间提供了一个高摩擦系数的介质。

• after the front axle and real axle「s braking force is distributed, regenerative braking and friction braking are assigned.

  前后轴采用理想制动力分配，在分配好后，再对前后轴的再生和摩擦制动进行二次分配。

• the process experiment and result analysis of preceding roll forging for heavy truck front axle introduced in this paper.

  介绍了重卡前轴预成形辊锻工艺试验与结果分析。

• by definition, a fifth wheel is a wheel or a portion of a wheel with two parts rotating on each other that sits on the front axle of a carriage and adds extra support so it doesn’t tip.

  通过定义，第五个轮子，是成为一个四轮马车的前车轴上互相旋转的两个部分的一个轮子或一个轮子的一部分，而加上一个额外的辅助轮子，这样它就不会倾斜。

• as a practical example, the stress and strain of a laminated spring on the front axle of 「jie fang」 truck are calculated. finally, the calculated results are analysed and discussed.

  作为数值计算的实例，文末计算了解放牌汽车前桥迭板弹簧的应力与变形，并对计算结果作了分析和讨论。

• the gear box and the front axle are fixed on the stander;

  齿轮箱和前桥固定在机架上；

• at only 13 kg for one of the front axle rims, the mansory wheel is one of the absolute lightweights.

  在只有13对前轴轮辋一公斤的mansory轮是绝对的轻量级选手之一。

• the 3d styling method of die impression of automotive front axle and the method for generating numerically controlled machining program with ug are discussed.

  论述了汽车前轴辊锻模膛三维造型的方法及采用ug软件形成数控加工程序的方法，并对前轴辊锻模膛的加工工艺进行了分析。

• failure safety front tyre, within or after the tyres with stone or brick the car」s front axle and rear axle mat firm, in to defuse a tire below dig a pit, tire impending replaceable.

  拆换前轮胎或后内轮胎时，用石头或砖头将车的前轴和后桥垫稳，在要拆的轮胎下面挖坑，使轮胎悬空可更换。

• ningbo yuejin automobile front axle co. , ltd.

  浙江宁波跃进汽车前桥有限公司。

• the stabilizer bar under the wishbones of the front axle prevents trike and rider from leaning outward excessively in fast cornering.

  下的前桥稳定桿的叉骨向外倾斜防止过度三轮车在快速过弯和骑手。

• disc brakes all around became standard and the bell-housing of the front axle was changed to accommodate larger reduction-gears.

  碟剎成为各地标準和贝尔住房的前轴改变，以适应更大的还原齿轮。

• the article introduces a new type of project to design front axle lockpin hole machining tool.

  文章介绍了一种新型的前桥锁销孔加工的工艺方法。

• front axle now equipped with universal swing shafts.

  前轴现在配备的普遍摆动轴。

• a vertical bending fatigue experiment for a certain model of automotive front axle is reported in this paper.

  阐述了某汽车前轴的垂直弯曲疲劳试验。