片语

fuel body assembly燃料壳体组件

fuel burner assembly燃油燃烧器总成

fuel filter assembly燃油滤清器总成

secondary fuel filter assembly次级燃油滤清器总成

Fuel Strainer Assembly燃油滤清器

Fuel Pump Assembly燃油泵总成

fuel ferrying assembly燃料输送组件

Fuel Dup Assembly油杯

英汉例句

• numerical simulation of the flow field of the standard fuel assembly in china advanced research reactor is carried out by using computational fluid dynamics software cfx4.4 and cfx5.5.

  采用计算流体力学软件cfx4.4和cfx5.5对中国先进研究堆标準燃料组件流场进行了数值模拟。

• the experimental determination of the inlet resistance coefficients of fuel assembly as well as the primary side resistance of primary heat exchanger for 5mw heating test reactor is described.

  叙述了5mw核供热试验堆燃料组件入口和主换热器一次侧阻力系数测定实验。

• considering fuel assembly for pwr, it is possessed of dense lattice, complex geometry and strong absorption of neutron.

  对于压水堆燃料组件而言，栅格稠密、几何形状复杂，对中子的吸收较强。

• fuel assembly is a cylindrical pellets made of uranium dioxide fuel rods, and then assembled according to a certain order.

  核燃料组件是由圆柱状的二氧化铀芯块做成的燃料棒，然后按照一定顺序组装起来。

• the fuel assembly test rig should inspect the items mentioned above, show the values of the items and judge the inspecting results automatically.

  燃料组件检查仪必须对以上项目进行自动检测，检测出各项具体数值，并且能够自动判断检验结果是否合格。

• in this paper, the methods of calculating neutron flux distribution in two- dimensional light water fuel assembly are discussed.

  本文讨论二维轻水堆燃料组件内中子通量和功率分布的计算。

• new fuel assembly loading machine of china experiment fast reactor is a kind of kinetic equipment with very complex structure.

  中国实验快堆新燃料组件装载机是一机构部件，结构复杂，装载机的许多运动件和传动件难以用有限元进行精细模拟。

• this paper describes design characteristics on advanced fuel assembly (afa) supplied by fragema, and also describes several new improvements on second generation of advanced fuel assembly.

  本文介绍了法杰马所提供的先进燃料组件（afa）设计所具有的特点，同时介绍了第二代先进燃料组件的技术改进。

• the technology of precision casting for nozzles in fuel assembly is described.

  叙述了燃料组件管座的精密铸造工艺特点。

• as for the nuclear power safety, a variety of non-destructive testing on the production of nuclear fuel assembly is required during the manufacturing operation in npic.

  该单位生产的核燃料组件在制造过程中必须经过多种无损检测，其中在焊接工艺之后进行外形综合尺寸的检测就是重要部分。

• the failed fuel assembly identification system is an important safety system which ensures safe operations of reactor and immediate treatment of failed fuel rod cladding.

  破损燃料组件定位检测系统是为了确保反应堆安全运行、及时处理燃料包壳破损事故的安全重要设备。

• the plate-type fuel assembly is widely used in the design of the advanced reactor.

  板状燃料组件在先进核反应堆中得到了广泛应用。

• now bwr fuel assembly is unique in the sense that because we have boiling going on in the core there needs to be some assurance that every fuel assembly is getting coolant and getting water.

  现在，沸水型反应堆的燃料组件是和特殊的,因为在核心的地方已经沸腾了,那就需要一个保险措施，能让每一个,燃料组件都能冷却并且得到水。

• the flux distribution of two dimensional hexagonal geometry fuel assembly for lwr is studied, using the transmission probability method.

  讨论了用穿透概率法求解二维六角形几何轻水堆燃料组件中子通量的分布。

• this paper introduces the improved nhr 10 core design which includes the arrangement of the gadolinium burnable poison (bp), the fuel assembly arrangement and the fuel assembly reloading scheme.

  介绍了nhr-10组件内釓可燃毒物配置、堆芯燃料组件布置和换料方案的改进设计。

• a new type gripper with no power supply for loading or unloading a fuel assembly into or from the core of low temperature heating reactor is developed and tested.

  介绍了在低温核供热反应堆中装卸燃料组件用的一种新颖无动力源抓取机构，论述了它的工作原理、结构特点、参数设计及其明显的优点。

• as excitation magnitude increases, the 1st resonant frequency of the parallel plate fuel assembly decreases.

  试验结果表明：随着激励振级加大，板状燃料组件的第一阶共振频率减小；

• the flow distribution and pressure difference of different coolant channels in the standard fuel assembly at rated operating condition are reached.

  计算得到了额定工况下标準燃料组件内各个冷却剂通道的流量分布和不等间隙通道燃料板两侧压差。

• this paper describes the model of calculating the flux distribution in two dimensional hexagonal geometry light water reactor fuel assembly by interface current method.

  利用界面流法计算两维六角形轻水堆燃料组件内中子通量密度分布。

• it is difficult for fuel assembly in nuclear power station to avoid nonlinear seismic response induced by friction, slip defonnation and impact under strong earthquake.

  核电厂堆芯燃料组件在强震作用下难以避免地将产生摩擦、滑移和相互间的碰撞等非线性反应。

• compared with that in air, the 1st resonant frequency of the parallel plate fuel assembly in water decreases greatly, and the nonlinear vibrational characteristic is soft spring.

  板状燃料组件在水中的第一阶共振频率远比在空气中的小，且非线性特性仍呈软弹簧特性；

• this paper briefly introduces the design of the pressure vessel for full-scale fuel assembly scouring tests in high temperature and pressure for qinshan npp-1.

  本文介绍了秦山核电厂一期工程1：1燃料组件高温高压沖刷实验压力容器的设计。

• investigation showed: the fuel assembly of electromagnetic movable coil control rod drive mechanism is firm enough to suffer from the impulsive load, so it suits using in the reactor.

  结果表明：池式研究堆可移动线圈电磁驱动机构驱动线的跟随燃料组件能承受沖击载荷的作用，符合反应堆运行要求。

• analysis of fuel assembly is an important step in reactor physics design.

  组件计算是堆物理计算中的一个重要环节。

• continuing, and you have all kinds of releases from subsystems or components typically in the radwaste area where you might be able to drop a fuel assembly so all this has to be analysed.

  继续，你们已经得到了各种的释放,从子系统或者组件，典型地是在,放射性废物的区域，你们可能能够,将一个燃料组件丢进去,所以，这些需要分析。

• as an important part of china experiment fast reactor (cefr), the washing system of spent fuel assembly ensures that the running of fast reactor is safety and the data of experiment is correct.

  乏燃料组件清洗系统是快堆的重要组成部分，它不但保证了快堆的正常安全运行，而且保证了快堆实验数据的正确性。