片语

high heat input大线能量焊接

converted actual heat input实测折算热负荷

Heat Release Input Method热释放输入法

heat supply[建] 供热；热供应

weld heat input焊接热输入

welding heat input焊接输入热量

heat addition供热；加热

heat equator input热输入

英汉例句

• Additionally, because of the heat input from the vapour, the liquid on the tray boils, generating more vapour.

  此外，由于获得来自蒸气的热量，塔板上的液体沸腾，生成更多蒸气。

• The complex inclusions in CGHAZ promote the acicular ferrite formation, which is associated with heat input and affects the mechanical properties of CGHAZ.

  结果表明：CGHAZ中复合夹杂物可促进针状铁素体的形成，针状铁素体的数量与输入线能量有关并显着影响CGHAZ的力学性能。

• More heat input is needed to promotes molten aluminium wetting the steel sheet when the zinc layer is thin.

  当镀锌层较薄时，需要增大焊接热输入量，以提高液态铝在钢板表面的润湿。

• With increase of heat input and laser power density, the cross section of the weld transformed from nail shape to near X shape.

  随焊接热输入和激光功率密度的增大，焊缝截面由钉形向近X形转变。

• With the extension of welding time, heat input of friction welding surface will increase, thus the weld metal plastic deformation increases.

  随着焊接时间的延长，摩擦焊接表面的热量输入会逐渐增加，从而增大了焊缝塑性金属的变形量。

• Methanol and ethanol had higher wetting capacity than distilled water in the low heat input cases.

  甲醇和乙醇在较低输入加热功率条件下的润湿能力要强于蒸馏水；

• The electric spark build-up welding technology features less heat input and negligible residual stress etc., which is non - replaceable in the welding of special key components.

  电火花堆焊工艺具有热输入量小、残余应力可忽略不计等显着特点，在特殊关键部件焊接中有不可替代性。

• Achieve continuous balance between produced and consumed steam. This master pressure control approach controls total heat input into boilers, as well as total steam flow into each header.

  实现产出和消耗蒸汽的连续平衡。主压力控制方法控制着输入锅炉的总热量以及流入每个锅炉联管箱的蒸汽量。

• To study heat input of metal parts in deposition forming is favorable for forecasting and avoiding flow and collapse in deposition layers.

  研究金属零件熔积成形中的热输入有利于预测和避免熔积层中出现流淌和坍塌现象。

• If welding procedure tests have been performed at both a high and a low heat input level, then all intermediate heat inputs are also qualified.

  如果焊接工艺试验在高热输入值和低热输入值下进行，那么，中间的热输入也应合格。

• In vacuum: PHP heat transport performance was very bad when took the top heat input way.

  抽真空条件下：采取顶部加热方式的实验中，脉动热管传热性能很差。

• Heat efficiency during hydrate thermal recovery, i. e., hydrate decomposition heat to total heat input ratio, has also been analyzed based on the model.

  在此基础上，分析了水合物热力开采过程中热量的有效利用率，即用于水合物分解的热量与输入的总热量的比值。

• Solar radiation heat input is also registered.

  太阳辐射热量输入也能收益。

• Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform.

  以激光为热源的焊接同样也可以得到低热输入、变形量极少的效果。

• The effects of arc voltage, welding current and heat input on the weld appearance in submerged-arc welding(SAW) of A105 steel with small diameter welding wire were experimentally researched.

  主要研究A105钢小直径焊丝埋弧焊时，电弧电压、焊接电流和焊接热输入对焊缝成形的影响。

• When impact requirements apply, the upper limit of heat input qualified is 25 % greater than that used in welding the test piece.

  当采用沖击要求时，适合的热输入的上限比试件焊接时使用的热输入大25%。

• In experiments, brazing parameters and laser incident Angle were changed during the process. The regularity of appearance of brazing seam in different heat input was obtained.

  试验过程中，通过改变钎焊工艺参数及激光入射方式，研究了镀锌钢板激光填丝钎焊在不同热输入下的钎缝外观成形规律。

• The condenser is a heat equipment, the evaporator absorbs heat with heat input power of compressor transformation with the transfer of the cooling medium ( such as water or air ).

  冷凝器是放出热量的设备，将蒸发器中吸收的热量连同压缩机输入功率转化的热量一起传递给冷却介质（如水或空气）带走。

• The studying results indicate that the magnitude and distribution of residual stress are related to the heat input created by welding process and to the cross section geometry.

  分析结果表明，厚板焊接工形截面残余应力的大小及分布，除了与焊接输入热量有关外，尚与截面几何尺寸有关。