英汉例句

• according to the design result, the drawings of hot forging and forging dies can be drawed by plotter.

  根据设计结果由绘图机绘制热锻件图和模具图。

• the factors of influencing the thermal load and thermal stress at the peril point of hot forging die were analyzed.

  分析了影响热锻模热负荷与危险点处热应力的因素。

• the steels can obtain better strength and toughness by subsequent air cooling after hot forging or rolling without any heat treatment.

  本钢种无需经过任何热处理，经锻轧后空冷就能达到较好的强韧性。

• the forming technology and parameters for hot forging of the brass brake shield, and the structure and the working process of the die were introduced.

  介绍了黄铜闸板热锻成型工艺和参数，还介绍了模具结构及工作过程，提出了在热锻过程中应注意的几个问。

• the clutch gears can not be processed by cutting, but by hot forging due to its structure and shape.

  牙嵌齿轮因其结构形状所致无法切削加工，需要热锻成形。

• the importance of numerical simulation of microstructure evolution during metal hot forging was introduced in this paper.

  阐述了金属材料塑性加工中微观组织演变数值模拟的重要性。

• finally the design and application achievement of this hot forging die are described.

  介绍了油孔螺塞拼接式热锻模具的设计及其应用效果。

• this paper introduced a cad system of the technology and dies for hot forging of long forge pieces.

  介绍了长轴类锻件热锻工艺及模具的计算机辅助设计系统。

• hrc28-38. corrosion and thermo-fatigue resistance work harding. hardfacing of hot forging die.

  耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模。

• the importance of developing new die steel, and some die steel , specially hot forging die steel a and plastic die steel b produced by tisco have been introduced in this article.

  介绍了开发新型模具钢的重要性，介绍了太钢生产的一些模具钢品种，重点介绍了开发出的热作模具钢a和塑料模具钢b。

• research on the stress and strain evolution of aluminum alloy hot forging die;

  简述了精铸热锻模具国内外应用状况，对铸造模具钢的研究进展进行了研究。

• this new process is suitable for mending the casting defects, worn surface, spalling and scratching of various forming dies, hot forging dies and plastic moulds.

  这种技术适用于修补成型模具、热锻压模具及各种塑料模具的铸造缺陷、磨损、小面积局部剥落、损伤、划沟等。

• the universal law and method of material selection of hot forging die are introduced.

  介绍了锤锻和热挤压类热锻造模具选材的一般规律和方法；

• when the term forging is used, it usually means hot forging .

  当提到锻造术语时，通常意味热锻。

• riveting machines, metal shavings press, forging machine operators, large products such as hot forging hydraulic press.

  铆接机、金属屑压块机、锻造操作机、大型热锻液压机等产品。

• applications of hot forging for engine blades of titanium alloys are discussed. finite element (fe) modelling has been extensively used to ensure a better understanding of the hot forming process.

  钛合金叶片高温锻造研究中，有限元模拟是分析锻造过程中的热力耦合，预测并优化锻造成形过程的一个重要手段。

• cad program of finishing cavity based on the hot forging drawing for hammer forging was developed. it is a part of the cad system of die for hammer closed-die forging.

  以热锻件图的数据为基础，建立锤上模锻终锻型槽的整个设计过程的数学模型，作为所开发锻模cad实用系统中的一部分。

• because of the forming temperatures are different, the cooling of warm molding forging are distinguish from hot forging forming.

  因其成形温度的特点，对温锻模具冷却有别于热锻成形。

• the feasibility study of manufacture method for 「ideal material structure hot forging die」 is expressed.

  在第四章，对理想材料结构热锻模具的制造方法进行可行性研究讨论。

• in the paper, by rigid-plasticity finite element software deform-3d, the hot forging process of the crankshaft is analyzed under different technologic conditions.

  在热锻过程中，由动态再结晶引起的微观组织演化是决定锻件最终性能的重要因素之一。

• the multi-mechanism and mathematic models of microstructure evolution during material hot forging were emphatically described.

  重点介绍了金属热锻过程中材料微观组织演变的机理和数学模型。

• can be used in the manufacture of hot forging scale or hot extrusion dies.

  毫米，型腔复杂，受力载荷较大的大型锤锻模或锻造压力机热锻模。

• in accordance with weakness in hot forging and quality of retaining ring, a new expanding extrusion complex forming process is put forward through analyzing the traditional hot forming process.

  针对目前护环质量及其热锻工艺中存在的问题，通过对热成形技术的分析，提出了护环扩挤复合成形新工艺。

• two phase structures and textures of a 15%mn steel in hot forging state and a tensile-deformed 20%mn steel were analyzed by orientation mapping based on ebsd technique.

  利用ebsd取向成像技术初步分析了含锰15%的热锻态高锰钢和含锰20%的拉伸样品中的两相组织结构及取向特点。

• the fp1000 hot forging press is our first hot forging production line, it also means the continuous improvement of the company.

  本次引进的fp1000热模锻压机是昆山正大的第一条热模锻生产线，同时也是公司不断进步的又一体现。