片语

hot isostatic pressing热等静压；高温等静力压制

reactive hot isostatic pressing反应热等静压

Hot-Pressing Rhubarb热压大黄

hot isostatic pressing equipment热等静压设备

hot-pressing furnace热压炉

hot-pressing strain热压应变

hot isosotatic pressing sintering热等静压设备

powder hot isostatic pressing粉末热等静压

英汉例句

• Different kinds of conductive composites have been prepared from the raw materials of phenolic resin, epoxy resin and graphite by the hot pressing process.

  以酚醛树脂、环氧树脂与石墨作为基本原料，采用热压成型制备了几种导电复合材料。

• The natural curing time of CPB after hot pressing on the physical and mechanical properties of fast-curing CPB were determined by the hydration of cement.

  水泥刨花板卸出压机后的自然养护时间对快速固化水泥刨花板物理力学性能的影响主要取决于板在养护期间水泥的水化情况。

• The utility model relates to a hot pressing roller type filling machine for mesh bag seedling matrix, in particular to a mesh bag seedling vessel making machine, belonging to agricultural machinery.

  热压滚轮式网袋育苗基质灌装机涉及一种农业机械，更具体的说是一种网袋育苗容器制造机器。

• We take three factors into consideration including coupling agents, assembly time, and hot pressing time to analysis the influence they play to MOR, MOE, surface bond strength, bond strength.

  确定偶联剂、陈化时间和热压温度为实验因素，以静曲强度、弹性模量、胶合强度、表面胶合强度为衡量指标。

• The tribological characteristics of a nickel-base material containing sulfur made by hot pressing and sliding on the hard metal YJ2, is studied.

  研究了通过热压法制备得到的含硫镍基合金与YJ2硬质合金对偶的摩擦磨损特征。

• It has been shown that at present hot pressing is the most widely used for it and the fastest developed method.

  并指出热压法工艺是目前应用最多，发展最快的方法。

• This paper introduces the physical and chemical change of particleboard in the course of hot pressing and analyses the effect of temperature, heating time and pressure.

  介绍了刨花板热压过程中板坯的物理变化和化学变化，分析了热压温度、时间、压力在热压过程中的作用，阐明了热压工艺是刨花板生产中产品质量保证的重要环节。

• There are some obviously different points between medium density fiberboard(MDF) hot pressing technology by continuous press and multi opening press.

  连续平压法生产MDF与多层压机生产在热压工艺上有着明显的区别。

• This paper dealt with the relationship between hot pressing parameters and mechanical properties (MOR MOE and IB) of bamboo particle board by the orthogonal design method.

  利用正交试验法研究了竹材刨花板热压曲线中各因素与板材的静曲强度、弹性模量及平面抗拉强度间的关系。

• The prepreg hot pressing condition is optimized by analyzing TGA and studying influence of parameters on dielectric and mechanical properties of composites.

  通过热失重TGA分析以及考察加工成型过程中工艺参数变化对复合材料介电性能、力学性能的影响 ，优化了预浸料热压成型工艺条件。

• The hot pressing correction to the small size sawn timber deformed has been tested in this paper.

  对已产生变形的小规格锯材，本文进行了热压校正试验。

• The results showed that the steam injection hot pressing method shortened the hot pmsmng time of LVL, and the quality of the products was quite good.

  结果表明，喷蒸热压可有效缩短杉木单板层积材的热压时间，且制品性能较好。

• This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells.

  介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热沖压成形的工艺技术。

• The results show that a continuous gradient distribution of Co could be obtained by controlling the hot pressing parameters.

  试验结果表明：热压温度、保压时间等工艺参数对梯度合金的热压致密化及梯度组织的形成有着明显的影响；

• Main: Application: it is used for the hot pressing and gluing of the glued board block to make the plywood of certain spec.

  主要用途：用于对涂胶组合的板坯进行热压胶合，以便制造一定规格的胶合板，也可用于刨花板，贴面板，细木工板等其他人造板的热压。

• The effect of hot pressing sintering temperature, pressure and time on its properties are investigated by means of orthogonality rejection and variance analysis.

  采用正交设计和方差分析的方法研究了热压烧结温度、压力、时间对该砂轮性能的影响。

• The direct steam curing after the unloading of hot pressing CPB could greatly accelerate thc hydration of cement.

  板坯卸出压机后的直接蒸养可大大加速水泥的水化过程。

• Many producing methods are developed as the craft improved, including isostatic cool pressing, dry pressing and hot pressing molding, to meet customers' different requirements to technique.

  生产工艺的不断改进，已形成多方法制造：冷等静压生产、干压生产、热压注成型生产，可满足了不同用户的技术要求。

• This paper describes the application results of Carborundum and cast stone in mineral processing equipment as well as the hot pressing technology for producing them.

  本文叙述了绿碳化硅砂、铸石砂在选矿设备中的应用效果以及热压生产工艺。

• The mechanical properties and the tribological characteristics of the Ni-Cr-Mo-graphite composites made by hot pressing were studied.

  本论文研究了热压制备添加石墨的镍铬钼复合材料的力学性能及摩擦磨损特性。

• To combine the advantages of ceramics and cemented carbide, a novel ceramics and cemented carbide layered inserts was successfully developed using hot pressing technique based on th...

  采用热压烧结工艺制备了上层为具有一定厚度的陶瓷、下层为硬质合金的陶瓷硬质合金复合片。

• The factors are glue spread, hot pressing temperature, environmental concerned flame-retardant spread and hot pressing time in influence sequence.

  影响大小次序为脲胶施加量>热压温度>阻燃剂施加量>热压时间。

• The result showed if the pressure and the time in every stage were correctlly determined that is the key factor in the hot pressing technology.

  结果表明合理确定热压各个阶段的压力、时间，是热压工艺中最关键的要素。