英语释义

1. of or relating to a combination of moisture and heat

片语

hygrothermal environments湿热环境

hygrothermal stress湿热应力

Hygrothermal Performance湿热性能

hygrothermal conditions湿热条件

hygrothermal enviroment湿热环境

Hygrothermal properties湿温特性

hygrothermal aging湿热老化

英汉例句

• The mechanical properties of perspex under an accelerated aging condition of the hygrothermal were studied, and the laws of hygrothermal aging for perspex were obtained.

  研究有机玻璃材料在湿热加速老化条件下的力学性能，得到有机玻璃在湿热条件下的老化规律。

• It was indicated that the hygrothermal climate of Wanning decreased foe strengths of adhesives sharply, while the dry and cold climate of Hailaer had little influence o...

  大气曝晒结果表明，万宁的湿热气候大大降低了胶粘剂的强度，而海拉尔的干燥、寒冷气候对胶粘剂的强度影响则较小。

• The changes of strength and stiffness of joints under hygrothermal condition are discussed.

  探讨了含脱层的复合材料连接件在湿热环境下的强度和刚度数值的变化。

• The aging mechanism of rigid polyurethane foams at indoor storage conditions was investigated with indoor storage tests, accelerated hygrothermal aging tests and IR spectra.

  采用室内贮存试验、人工加速湿热老化试验和红外光谱法研究了硬质聚氨酯泡沫塑料在室内贮存条件下的老化机理。

• The influence of hygrothermal environment on flexural strength of composites is greater than flexural modulus.

  湿热对复合材料弯曲强度的影响要大于对弯曲模量的影响。

• The changes of moisture absorption properties, tensile strength, fracture elongation and elastic modulus of APMOC fiber with aging time were investigated through the hygrothermal aging test.

  通过湿热老化试验，研究了APMOC纤维吸湿性能、拉伸强度、断裂延长率以及弹性模量随老化时间的变化。

• The changes in mechanical and physical properties and chemical structure of polyvinyl formal (PVFM) foam caused by hygrothermal ageing tests were studied by means of IR and other measuring methods.

  用红外光谱和其他测试方法对聚乙烯醇缩甲醛(PVFM)泡沫材料湿热老化前后力学性能、物理性能和化学结构的变化进行了研究。

• XIE K y, LI h, SUN y, et al. Effect of hygrothermal aging on behaviors of fiber reinforced resin composites and its mechanism [J]. Materials for Mechanical Engineering, 2014, 38 (8) : 1-6.

  [14]谢可勇，李晖，孙巖，等。湿热老化对纤维增强树脂基复合材料性能的影响及其机理[J]。机械工程材料，2014,38 (8)：1 - 6。

• Feng Qing. Research on the attenuation law of interfacial properties of carbon fiber reinforced composites under typical hygrothermal conditions. Beijing: Beihang University, 2010.

  冯青。典型湿热条件碳纤维复合材料界面性能衰减规律研究。北京：北京航空航天大学，2010。

• The results showed that corrosion of lead and molds of rubber plug occurred on aluminum electrolytic capacitors in hygrothermal environment.

  结果表明，铝电解电容在湿热环境下出现了引脚腐蚀和橡胶塞长霉的失效现象；

• Flexural strength and open-hole tensile strength of glass-fiber woven reinforcement epoxy laminates is investigated experimentally at room temperature and hygrothermal environment.

  实验研究了不同铺层厚度的二维机织玻璃纤维织物/环氧胶膜基体复合材料层压板室温和湿热环境下的开孔拉伸和弯曲性能。

• The hygrothermal properties of 5284 epoxy matrix composites are investigated in this paper.

  本文研究了以52 84为基体的复合材料的湿热性能。