英语释义

1. utilizing, used for, or relating to hypoid gears
hypoid rear axle hypoid grease

片语

hypoid gear[机] 準双曲面齿轮

hypoid bevel準双曲面伞齿轮传动

hypoid generator準双曲面齿轮加工机床

Hypoid offset準双曲面齿轮偏置距

gear hypoid戟齿轮

hypoid structure双曲面结构的施工

hypoid oil双曲线齿轮油

Hypoid gears[机] 準双曲面齿轮

hypoid axle双曲面齿轮传动

英汉例句

• Based on the conceptual model of the five-axis simultaneous CNC bevel gear cutting machine, a new machining theory for the function-oriented active tooth surface of hypoid gear is proposed.

  基于五轴联动数控铣齿机的概念模型，提出一种新的加工準双曲面齿轮主动设计齿面的切齿原理。

• The basic principle for the geometrical design of hypoid gears is introduced.

  介绍了準双曲面齿轮几何设计的基本原理。

• DD652 or EQ153 Pressed and welded steel banjo housing, single reduction, hypoid gear.

  DD652或EQ 153沖压焊接钢管班卓琴住房，单减少，双曲面齿轮。

• An optimization design method for a hypoid gear with high tooth was proposed based on the investigations into variations of working tooth height and constraint conditions of undercut.

  通过增加工作齿高和对根切条件的深入研究，提出了高齿準双曲面齿轮的优化设计方法。

• The active design technique of hypoid gear tooth face provides a kind of fresh method of the hypoid gear design.

  準双曲面齿轮齿面主动设计技术为準双曲面齿轮副的设计提供了一种全新的思路。

• Then, According to the cutting tooth processing principle, establish hypoid gear model, and conduct virtual assembly, interference checking, provides the precise model for the following analysis.

  再根据切齿加工原理，建立了準双曲面齿轮模型，并进行虚拟装配，干涉检查，为后面分析提供精确的模型。

• Itwill have great effect to the improvement of product quality spiral bevel and hypoid gears in our country.

  这将对我国锥齿轮产品质量的提高产生较大的影响。

• Thus, the basis of founding loaded tooth contact analysis calculating method of hypoid gear is brought about.

  其结论是建立该类齿轮副承载啮合性能分析计算方法的基础。

• The hypoid gear is one sort of the special bevel gears. It gets comparatively extensive application in aircraft industry, automotive industry and tractor industry.

  準双曲面齿轮是一种特殊的锥齿轮，它在航空、汽车、拖拉机等工业中得到了较为广泛的应用。

• In particular the automotive industry is developing rapidly so that the requirement of meshing quality of hypoid gear is increasing.

  特别是汽车工业的迅猛发展，对準双曲面齿轮的啮合质量要求越来越高。

• The paper presented the theory and method for the ultrasonic lapping of spiral-bevel and hypoid gears and analyzed its insensitive vibration cutting mechanism.

  提出了超声研磨螺旋锥齿轮的理论与方法。分析了超声研齿不灵敏性振动切削机理。

• The intelligent check system proposed in this paper can be used as the final quality check and quality control tool in spiral bevel and hypoid gear manufacture process.

  本文提出的锥齿轮智能检测系统可在锥齿轮制造过程中用作最终质量检测和质量控制工具。

• Combined with the practical examples, the premature failure analyses for the hypoid gears of driving axle of vibratory compactor and evaluation of heat treatment technique were performed.

  结合现场实例，进行了振动压路机驱动桥弧齿準双曲面齿轮早期失效分析和热处理技术评价。

• The theory of calculating geometric parameters of pitch cone of curved tooth hypoid gear is investigated in this paper.

  本文研究了曲齿準双曲面齿轮分度锥面几何参数计算的原理。

• The method of ultrasonic vibration lapping on the spiral-bevels and hypoid gears was first presented.

  提出螺旋锥齿轮超声振动复合研磨的方法，介绍了其原理；

• According to the feature of epicycloid hypoid gear, a new method is proposed to calculate the geometric parameters of pitch cone accurately.

  根据延伸外摆线準双曲面齿轮的特点，提出一种精确计算其分度锥面几何参数的新方法。

• The gear cutting machines with single tilt mechanism, such as the TAN-A9 machine, are intended only for cutting the spiral bevel and hypoid gears with teeth of constant depth.

  诸如TAN-A9这样的单刀倾切齿机床过去仅用于加工等高齿弧齿锥齿轮和準双曲线齿轮。

• Compared to bevel gear, hypoid gear has larger overlap coefficient, lower gear contact stress, more smooth transmission, lower impact and noise, higher load bearing capacity, longer life and so on.

  準双曲面齿轮与普通圆锥齿轮相比，具有重合度大、齿面接触应力低、传动平稳、沖击和噪音小、承载能力高和寿命长等优点。

• Spiral bevel and hypoid gears have been widely used in the transmission system of automobile as one of the key parts.

  弧齿锥齿轮和準双曲面齿轮(以下简称锥齿轮)广泛用于车辆传动中，锥齿轮的传动噪声以及平稳性是影响整车性能的重要因素。

• Taking the case of product family design of nc spiral bevel and hypoid gear generator, design method and course were analysed around fundamental principles of product family design.

  围绕产品族设计的基本思想，以数控弧齿铣齿机产品族设计为例，分析了产品族设计的方法与过程。

• Spiral-bevel and hypoid gears with driving smoothly and high strength are widely used in driving between crossed axes, such as vehicles, machine tools, helicopter and mining machinery.

  螺旋锥齿轮由于其传动平稳、强度高而被广泛应用于车辆、机床、直升飞机、矿山工程等机械的角度传动中。

• The developed system can easily read data from graphs and tables, design hypoid gears, verify tooth strength, do drawings and calculate cutting and machine setting parameters.

  该系统能方便完成图表数据检索、齿坯设计、强度校核、绘图、调整卡计算输出。