片语

large e deflection大挠度

large load deflection大挠度

large positive deflection of electroretinogram视网膜电流图的明显正向偏移

large elastoplastic deflection弹塑性大变形

problem of large-deflection大挠度问题

large-deflection thin penal薄板大挠度

large-deflection theory大变形理论

英汉例句

• the geometric non-linearity and the coupling action of bending and torsion are comprised in the static formulation, which can describe the large deflection of the three-dimensional beams.

  在静力学方程中既考虑了几何非线性项，也考虑了弯扭耦合项，可以描述空间梁发生的大挠度变形。

• in this paper, the solution of large deflection of circular sandwiched plate under axisymmetrical polynomial distributed load is obtained by method of point collocation (mpc).

  本文用配点法计算了受多项式型轴对称分布荷载作用的夹层圆板的大挠度。

• with cubic b-splines taken as trial function, the large deflection of a thin ring plate was calculated by the method of point collection.

  作者以三次b样条函数为试函数，用配点法计算环形薄板的大挠度。

• on the basis of classical lamination theory and large deflection hypotheses of plate, the equilibrium and compatibility equations of simply supported composite laminated plates were obtained.

  基于经典的层合板理论及板的大挠度基本假设，得到四边简支层合板的非线性运动方程及变形协调方程；

• on the basis of classical lamination theory and large deflection hypotheses of plate, the equilibrium and compatibility equations of simply supported composite laminated plates are obtained.

  该方法基于经典的层合板理论及板的大挠度基本假设，得到四边简支层合板的非线性运动方程及变形协调方程；

• orthotropic shallow cylindrical shells with large deflection are theoretically calculated and experimentally analyzed under the cations of uniform and concentrated loads.

  对正交异性扁薄圆柱壳在均布载荷及集中载荷作用下的大挠度问题进行了理论计算和测量。

• a model for analyzing the large deflection of an elastic cantilever beam with constraint under uniformly distributed load was established.

  建立了分析均布载荷作用下受约束悬臂梁的弹性大变形三阶段模型。

• the problem of solving large deflection plate by the variational method is changed into that of solving systems of cubic algebraic equations with multi-unknown quantities.

  采用变分法求解薄板大挠度问题的高级近似解时将导致多元三次代数方程组。

• in this paper a hybrid perturbation - weighted residual method is proposed for the large deflection of a circular.

  本文采用摄动-加权残值联合法求解圆板大挠度问题。

• considering the residual stress, the total stress analytical solutions for square-shaped boron-doped silicon diaphragms with large deflection are presented.

  考虑残余应力的情况下，薄膜在大挠度时总应力的解析表达式。

• the method of springback finite-element for large deflection of plate shaping is established on springback potential energy principle that is already concluded.

  通过引入有限变形回弹反耦联系统和反耦联方程的概念，由回弹势能原理建立了板成形的大挠度回弹有限元法。

• compared with the linear theory, the results of large deflection are more reasonable.

  与线性结果相比，大变形理论所得结果更具準确性。

• the solution of large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure under simply supported boundary condition is obtained in this paper.

  本文给出了正交各向异性变厚度周边简支圆薄板在均布载荷下大挠度问题的解。

• in this paper, the elastic rod theory is applied to establish a static analytical mechanical model for a small strain, large deflection marine pipeline during installation in ocean.

  本文运用弹性桿理论建立了小应变、大挠度铺设过程中海底管道的静态分析力学模型。

• this paper gives the exact solution of large deflection of circular sandwich plate under the action of uniform lateral load by the method of power series.

  本文应用幂级数方法求出了在均布载荷作用下夹层圆板大挠度问题的精确解。

• a simplified analytical method for the elastoplastic dynamic large deflection response of portal frames under impact loading is reported in this paper.

  本文报道一种求解门式刚架在沖击载荷作用下动态弹塑性大变形响应的简便分析方法。

• based on the theory of large deflection buckling of shell structure, the finite element method to solve the critical force of buckling of flat is studied.

  在介绍板壳大挠度屈曲理论的基础上，研究了求解平板屈曲临界力的有限元方法；

• a new approximate formula for the large deflection problem of compression bar with two ends are simply supported is obtained, by the use of ritz-galerkin method.

  通过非线性振动中常用的里兹-伽辽金法，推出了两端铰支压桿大挠度问题的一个新近似公式，计算结果表明具有较高的精度。

• a large deflection bending model is developed for incompressible fluid saturated orthotropic poroelastic plates, and the corresponding basic governing equations are presented.

  对于流体饱和不可压正交各向异性多孔弹性板，建立了大挠度弯曲模型，给出了相应的基本控制方程。

• the strain distribution based on small and large deflection theories of diamond square diaphragm was studied using theories of plate bend.

  采用薄板弯曲理论研究了均匀载荷作用下多晶金刚石方膜在小挠度和大挠度下的应变分布情况。

• based on the strain energy equation for the three-dimensional continuum, the finite element formulation for large deflection of three-dimensional beam is developed.

  在静力学方程中既考虑了几何非线性项，也考虑了弯扭耦合项，可以描述空间梁发生的大挠度变形。

• the solutions of a large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure and under concentrated load are obtained in this paper.

  本文给出了正交各向异性变厚度圆薄板在均布载荷与集中载荷作用下大挠度问题的解。

• taking cubic b-spine as trial function, the large deflection of a circular plate subjected to axisymmetrical distributed load is calculated by point collection.

  本文以三次b样条函数为试函数用配点法计算任意轴对称分布荷载作用下圆板的大挠度。

• so far there is only one special numerical solution to the problem of the large deflection of the annular sandwich plate with uniform thickness because of the complication of the boundary conditions.

  由于等厚度夹层环形板大挠度计算边界条件复杂，迄今仅有一种特殊情形的数值解答。

• a new approach to the solution of large deflection bending problem of thin plates is presented by using boundary element method.

  本文提出一个用边界元法求解薄板大挠度弯曲问题的新途径。