片语

NOMINAL OUTSIDE DIAMETER标称外径

exact outside diameter塑料管的外径

outside-diameter measuring instrument外径测量器

outside barrel diameter[机]

bearing outside diameter[机] 轴承外径

outside e diameter外径

Outside e Diameter VOL提及

outer diameter外直径

outside of diameter外径

overall diameter外直径；最大直径

英汉例句

• outside diameter of high-strength oil casing produced by tempering process would change, and this is unfavorable to thread machining.

  针对用调质方式生产的高强度石油套管，其外径形态会发生变化，不利于车丝加工。

• a device that can be run into a wellbore with a smaller initial outside diameter that then expands externally to seal the wellbore.

  一种可以下入井眼内的装置，刚下入井眼时外径较小，之后外部膨胀去密封井眼。

• the tubular connection of the frame components to be fitted together shall have a minimum length of two times the outside diameter .

  连接桿件的管状连接，其最小长度应该是其外径的两倍。

• the minimum restriction determines the maximum tool string outside diameter and may influence the configuration of the assembled tools or equipment.

  井筒最小直径确定了工具管柱的最大外径，而且可能影响被安装工具或设备的配置。

• when the outside diameter of cylinder is infinite, the solution of cylinder problem will be made in infinite medium.

  当圆筒外径为无穷大时，便得到无限介质中的筒腔问题的解。

• if it will fix with hose clamp or cross the steel board, the outside diameter of hose should be pay more attention.

  若胶管采用管夹固定或胶管过钢板等间隔物时，也要注意胶管的外径尺寸。

• analysis shows that, when the outside diameter of the joint is small, the variation of the outside diameter will change the sin critical buckling load.

  分析指出，当接头外径较小时，外径的变化将改变正弦屈曲临界力。

• short pitch conveyor screws are of regular construction except that the pitch of the flights is made less than the outside diameter of the screw.

  短节距运输机螺钉是常规的结构，但是刮板的节距不少于螺钉的外部直径。

• when grinding the bearing ring, the outside diameter of it was taken as locating datum to process the outer raceway with the assistance of electromagnetic centerless clamper.

  轴承环磨削过程中，以轴承环外径作为定位基準，在电磁无心夹具上磨削轴承环外滚道。

• an indexing conveyor moves tubes through cap and coupling application stations, after which bar code labels are applied to the outside diameter of the tubes.

  在管身外侧贴完条形码标签之后，分度输送机移动管通过管帽和拧接头机台。

• it shows that the fractures of drill-stem subs are ascribed to outside diameter and the irrational bend strength between inside and outside threads.

  通过分析计算认为，鉆柱转换接头断裂原因与外径不符合标準及内、外螺纹接头弯曲强度比不合理有关。

• results echocardiogram can measure inside and outside diameter of aorta exactly, and it help us to understand inside abnormal construction and blood flow of aorta.

  结果超声心动图检查能準确测量患者的主动脉内、外径，了解其内部异常结构和血流情况。

• the bolt hole pattern and outside diameter dimensions were adopted for plastic flanges manufactured in the u.

  用于美国制造的塑料法兰上所采用的螺栓孔模式和外径尺寸。

• conveyor track can be adjusted to apply to different outside diameter of the bottle.

  输送轨道可以调节，以适用于不同外径的瓶子。

• the solid sleeve is a slip fit coupling that fits the outside diameter of the tubing or fitting.

  是一个滑动配合联轴器，连接管或管道的外直径。

• the shaft is fixed to the wheel body and arranged uniformly on the tooth path, and the outside diameter of the bearing or the shaft sleeve jacketed on the shaft is as wide as the tooth path.

  所述轴固联于轮体，等分排列于齿道上，套于轴的轴承或轴套的外径与齿道等宽。

• radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface.

  径向球面滑动轴承由一个具有凸球形外表面的内圈和一个具有相应凹球形内表面的外圈组成。

• grease from a standard grease fitting is distributed to the shaft through a groove in the outside diameter of the bearing and from radial holes in the bushing's well.

  从标準润滑油嘴注入的润滑油通过轴承外径的环形槽分流到阀轴上，并且从径向孔流入轴衬壁上。

• the outside diameter has also been trimmed.

  外面的直径也被削减。

• the average outside diameter of the end pieces is 10 mm, but can vary between 8 and 14 mm in intervals of 2 mm.

  所述末端装置的平均外缘直径为10毫米，但可以在相隔2毫米的间距在8毫米至14毫米之间变化。

• based on it, three serials of members were separately compared and analyzed, including serial of time of under fire, width of cfstrc and size of the outside diameter of steel tube.

  在此基础上，进行了受火时间、截面宽度和钢管外径三个系列对截面温度场影响的分析比较。

• then the outside diameter of the blade is again measured very exactly, to determine diameter loss.

  再次精确测量刀片的外径长度，以测定外径的降低。

• to guarantee the inside diameter of a pipe or other cylindrical tool by pulling a cylinder or pipe (rabbit) of known outside diameter through it.

  确保管子或其它圆柱形工具的内径合适，通过拖动已知外径的圆柱体或管子（清管器）穿行其中。