片语

porous pillared layer structure孔状柱层框架

porous boundary layer control多孔边界层控制

porous medium layer多孔介质层

porous silicon layer多孔硅层

porous support layer多孔支棣层

Porous interfacial layer多孔界面

porous-layer open-tubular column多孔层开口管柱

porous supporting layer多孔支撑层

英汉例句

• The grain size of the porous layer is about 2nm and the thickness lamellar layer is a few tens of nanometer.

  多孔羟基磷灰石层是由纳米晶粒构成的，平均晶粒尺寸大约2纳米。花瓣状羟基磷灰石层由约几十纳米大小的晶粒构成。

• The outer porous layer is damaged after corrosion, while the inner dense layer played a key role to protect the coating from corrosion.

  经一定的腐蚀时间后，微弧氧化陶瓷膜的多孔层最终遭到破坏，而紧密层对防腐蚀起着至关重要的作用。

• A new type of strongly polar organic polymer porous layer open tubular column (OPPLOT-A) was prepared by in situ copolymerization of acrylonitrile and divinylbenzene.

  以丙烯腈为单体，二乙烯苯为交联剂，采用原位聚合法制备出了强极性的有机高聚物多孔层开管柱- OPPLOT -A型柱。

• The emission region is capable of emitting light omnidirectionally in response to a bias, with the porous layer enhancing extraction of the emitting region light passing through the substrate.

  半导体发射区域能够回应于偏压全方向地发射光，而使多孔层增强通 过基层的发射区域的光的提取。

• It is intended to summarize non dimensional criteria correlation applicable to boiling heat transfer on porous layer surface on the basis of a series of experiments.

  在整理并分析数据的基础上提出了多孔层管内流动结构及无因次準则式。

• The general behaviour of sound insulation of a single porous layer is shown in accordance with the theory for simplified conditions.

  单一多孔层的隔声的一般特性与简化条件的理论一致。

• The semiconductor material with its porous layer can serve as a substrate for a light emitter.

  具有其多孔层的半导体材料可充当用于光发射器的基层。

• The study and experiment of saturated liquid nitrogen boiling heat transfer in natural circulation at atmospheric pressure in home made porous layer tube is described.

  试验研究了大气压下自然循环饱和液氮在国产多孔层管内沸腾传热特性。

• Increasing the thick-ness of porous layer suitably was of benefit to boiling heat transfer. The coefficient of boiling heat transfer decreased as the height of thermal si-phon...

  适当增大多孔层厚度将有利于沸腾传热系数的提高，而热虹吸高度的降低将不利于沸腾传热系数的增大。

• The current forms a porous layer on the one or more surfaces of the semiconductor material in contact with the electrolyte.

  电流在与电解质接触的半导体材料的一或多个表面上形成多孔层。

• The porous layer is at least partially disposed within the thermoplastic layer.

  多孔层至少部分地设置在热塑性层中。

• The present invention provides a composite material including a substrate layer, a knit porous layer intermixed within the substrate material, and a thermoplastic layer disposed upon the porous layer.

  本发明提供一种合成材料，该合成材料包括基底层、与基底材料混合的针织多孔层和设置在所述多孔层上的热塑性层。

• Cobalt phase was chemically etched to certain depth beneath the surface and porous layer was formed after YG8 cemented carbide had been soaked in aqueous solution of dilute nitric acid.

  YG8硬质合金经稀硝酸水溶液化学侵蚀后，表面一定深度内的粘结相钴将被化学刻蚀掉，引起表层疏松。

• If the rainwater enters the porous layer near the top of a high hill, and if the well is dug at the bottom of the hill, the water may shoot from the well high into the air.

  如果雨水进入高山山顶附近的渗透层，而且，如果井打在山脚下，水也许会从井中喷出，射到高空里。