片语

position-error probe偏位传感器

POSITION BASED ERROR MODEL位置相关出错模型

position-error measurement位置误差的测定

Motor position detection error电机位置检测错误

mark position track error标记磁道错误

position measurement error位置测量误差

position line error位置线误差

PF Position Fix Error位置固定误差

position repetitive error定位重复误差

英汉例句

• The star point of the dynamic star simulator「s showing grid is measured, and the position error correction factor of each star point is calculated.

  利用经纬仪对动态星模拟器显示的网格上的星点进行测量，计算了各星点的位置误差及修正系数。

• This paper presents a method of robot position error compensation and introduces a high precision positioning system of robot.

  本文提出了一种机器人高精度定位补偿系统，介绍了一种位姿误差补偿方法。

• The state equation and detecting equation of the position error of moving target are built, the location and track to moving target is achieved by least-square estimation and Kalman filter algorithm.

  列出了对位置偏差估计的状态方程和测量方程，用加权的最小二乘估计和卡尔曼滤波算法，实现了定位和跟蹤。

• The mathematical model between position error and north seeking error is gotten through error theory and partial derivative principle.

  运用误差理论和偏导数原理，推导出转位误差与寻北误差二者之间的关系模型。

• In the simulation test, the position error and velocity error of maneuvering targets was seen to be reduced greatly. It indicates that the adaptive adjustment of maneuvering frequency is effective.

  仿真实验表明，通过对频率自适应调整，使机动目标的位置、速度估计误差明显减小。

• In the end the system」s position error and time error have been analyzed.

  最后，对系统的位置误差与时间误差进行了分析。

• But in the laser communication of APT technique, the position error signal's distill is very important, correspondingly, the choice of the detector seem to be to importance.

  在光通信APT技术中，位置误差信号的提取是非常关键的一环，相应地探测器件的选择就显得至关重要。

• A system used for position error analyzing with CMAC neural network is described.

  提出一种用CMAC神经网络进行位置误差分析的系统。

• The paper has proved theoretically and verified statistically by sampling that the distribution of the position error in arbitrary direction is Rayleigh Distribution.

  本文从理论上证明并抽样统计验证了任意方向位置度误差服从瑞利分布；

• The grinding principle of crankshaft journal is introduced, the formation reason of position error is analyzed in detail, and the corresponding measures are proposed as well.

  介绍了曲轴连桿轴颈磨削的原理，对其常见的位置误差现象的形成原因进行了分析，并提出了相应对策和办法。

• The paper introduces the position design of two-hole-one-side clamping apparatus, position error calculation and its features through examples.

  通过实例介绍了两孔一面定位方式夹具的定位设计，定位误差计算及特点。

• Two kinds of inspection methods of the position error of key slot an gear journal of crankshaft have been proposed.

  提出了两种曲轴齿轮轴颈键槽位置误差的检测方法。

• Combing with navigation equation, attitude error equation and error of inertial devices, mathematic model of velocity error and position error is derived.

  结合导航方程、姿态误差方程与惯性器件误差推导出载体速度误差与位置误差数学模型。

• Simulation results show that this integrated system can get navigation attitude position with high precision, also the position error and velocity error are decreased.

  仿真结果表明：本文提出的组合导航系统能够给出载体的高精度姿态信息，位置误差和速度误差也较小。

• Mathematical derivation proves that the reference makes the offset of position error more small, and accords with the running condition of practical fixation, which is more ideal.

  应用数学演绎推理法证明了这种基準使位置误差偏移值最小，又符合实际装配工作条件，比较理想。

• Through the analysis on every procedure of surveying 1:500 topographic map with the method of transit mapping, the position error of 1:500 topographic map is got.

  通过对经纬仪测绘法1：50 0地形测图过程中各个工序的分析，得出了1：50 0地形图上的点位中误差。

• The measurement equation for multi position error separation technique is put forward, and the equation is universal for all the current multi step and multi point methods.

  提出了多位法误差分离技术读数方程，可统一现行的多步法和多点法。

• Position prediction algorithm is introduced to compensate the position error in the sampling time, or the extra torque ripple would be produced.

  针对采样周斯内的位置误差会引起电机额外的转矩波动，本文引入了位置预测算法。

• A kind of adaptive fuzzy controller was introduced whose control-rule and scale-gene can be adjusted by itself according to the system position error and error change ratio.

  介绍了一种能够根据位置误差和误差变化率自动调整模糊规则和比例因子的规则可调自适应模糊控制器。

• Simulation results show that the position error of the integrated navigation system is less than 15% (RMS) of goal error over long intervals, and even smaller in the area with evident anomaly gravity.

  仿真结果表明：该组合导航系统长时间定位误差小于导航系统目标误差的15% (RMS)，在重力异常显着变化地区其定位误差将更小。

• Due to the inherent hysteretic nonlinearity, the giant magnetostrictive actuator (GMA) can cause position error in the open-loop systems, and cause instability in the closed-loop systems.

  由于内在的滞回非线性，超磁致伸缩驱动器(GMA)会在开环系统中引起定位误差，在闭环系统中造成系统不稳定。

• The poison error along disk tangential direction decreases the DPD signal amplitude, and the factor is 1.52T when position error is less than 25%.

  计算结果表明：沿盘片切向的位置误差使DPD的幅值变小，在25%的范围内DPD的幅值随切向位置误差的变化系数为1.52T；