RTV中文,RTV的意思,RTV翻译及用法

2026-04-14 05:35 浏览次数 20

RTV

abbr. 无线电电视(Radio Television);室温硫化(Room Temperature Vulcaniza-tion)

RTV 片语

片语

RTV cleanliness退厂因污染

rtv atv丽的

RTV mold快速模具

RTV resin硫化硅橡胶涂料

ntua rtv台艺广电迎新短片

RTV SiliconeRTV Silicone (Room Temperature Vulcanizing silicone) is a type of silicone rubber made from a two-component system (base plus curative; A+B) available in a hardness range of very soft to medium - usually from 15 Shore A to 40 Shore. RTV Silicones can be cured with either a platinum catalyst or a tin catalyst.

rtv bih波黑广播电视台

RTV closures退回厂方因钮扣问题

rtv coating常温硫化的涂层

RTV 例句

英汉例句

  • Once this is done I can make the RTV molds, produce tool stone plugs and away we go.

    一旦这样做,我可以使室温硫化模具,生产工具,石插头和远离我们。

  • RTV Universities and network education in universities are the two main forms of modern distance education in China.

    广播电视大学与高校网络教育是我国现代远程开放教育主阵地。

  • The special structure design and the presence of RTV grouting between the solar cell strings can prevent the secondary discharge incidents efficiently.

    通过采用特殊的结构设计和在太阳阵电池串之间涂覆RTV胶,可以有效抑制二次放电事件的发生。

  • Since it is used in different environment and with the discrepancy of product quality, the RTV coating used in different area has the problem of ageing and tenure of use.

    由于使用环境和产品质量的差异,不同地区使用的RTV涂料都存在着老化和使用年限的问题。

  • Next I mixed up some RTV and poured.

    接下来,我混合了一些内河船倒。

  • The course information network in local RTV universities is a fundamental supplement on RTVU「s 「Online Platform」 which plays a considerable role in teaching practice.

    基层电大专业信息网是电大在线教学平台的有力补充,它在基层电大专业教学中发挥了重要作用。

  • The preparation methods of deketoxime type one-part RTV silicone rubber sealant on spread ability and for formed in place gasket were introduced respectively.

    介绍了可涂饰性及就地成形密封垫圈用脱酮肟型单组分RTV硅橡胶密封剂的配制方法。

  • Once I cut all the bulkheads, to make them accurate, I placed them back into the master RTV molds and used icing on the edges to make the shape conform perfectly to the inside of the hull.

    我曾经削减所有舱壁,使他们準确的,我把他们重新融入主室温硫化模具和使用除冰对边缘,使形状完全符合以内部船体。

  • The application and progress of HTV silicone rubber, RTV silicone rubber and liquid silicone rubber to electrical insulator were introduced.

    简述了国内外硅橡胶(高温硫化型硅橡胶、室温硫化型硅橡胶、液体硅橡胶等)在电气绝缘方面的应用情况。

  • First I took the RTV master molds and used modeling clay at the right points to get the shape pattern.

    首先,我采取了室温硫化掌握模具和用于建模粘土在正确的点,以获得形状的模式。

  • The structure and the surface characteristics of fumed silica and its application in HTV silicone rubber and RTV silicone rubber were introduced as well.

    简述了气相法白炭黑的发展及国内生产情况,介绍了气相法白炭黑的结构和表面性质,以及在热硫化硅橡胶和室温硫化硅橡胶中的应用。

  • But as you can see here the red dust got into the RTV and it still set fine.

    但正如你可以看到这里的红色灰尘进入内河船和它仍然设定的罚款。

  • The amount of RTV used was basically just enough to paint one side of each severed piece.

    金额室温硫化使用,基本上是刚好够画的一个方面,每个切断一块。

  • The application prospect and process of RTV CR adhesive were related.

    简述室温硫化氯丁橡胶胶粘剂的应用前景及工艺路线。

  • Curing characteristics of silicone rubber can be divided according to their heat curing silicone rubber and RTV silicone rubber types.

    硅橡胶按其硫化特性可分为热硫化型硅橡胶和室温硫化型硅橡胶两类。

  • Next mold will be made from high tear strength RTV for sure.

    模具明年将作出从高撕裂强度室温硫化肯定的。

  • People have been using RTV molding (room temperature vulcanization or silicone rubber molding) for years to fill the void between prototype and production.

    快速模具(室温硫化或硅胶成型)已被使用很多年用以缩小原型和产品的差距。

  • By measuring the electrical resistivity of RTV silicone rubber with Ni powder, the percolation threshold of Ni_based conductive silicone rubber was determined.

    通过对镍粉填充rt V硅橡胶的电阻率的测量确定了镍基导电硅橡胶的渗滤值点。

  • In this paper, the release agent of RTV silicone which was composed of solvent, silicone rubber, coupling agent and catalyst was explained.

    本文对溶剂型有机硅隔离剂的溶剂与硅橡胶,偶联剂和催化剂等进行了论述。

  • It would have all come off the first RTV mold better I think.

    它将都小康第一室温硫化模具更好,我觉得。

  • I was mixing RTV in the kitchen and she was mixing cake mix.

    我是混合内河船在厨房里和她是混合蛋糕组合。

  • Now to put it back together and cut some basic keys in the wall to lock in the RTV core mold in it」s proper position.

    现在将它放回一起和削减一些基本的钥匙在墻上的锁,在室温硫化模具的核心,在它的正确的位置。

相关热词