英语释义

1. a mold made of sand and used in sand-casting

片语

sand mould砂型；砂模

resin bonded sand coated mold树脂砂型

casting in sand mold砂型铸造

Sand and mold soil砂子

roast sand mold表面烘干砂模

sand mold casting砂模铸造

casting sand mold铸造砂型

Sand Box Mold砂箱合模

green sand mold湿砂模；湿砂型

dry-sand core mold组芯铸型

英汉例句

• Manufacture and application of a kind of improved phenolic resin used as sintering flux to shape laser rapid molding sand mold was introduced.

  介绍了激光快速成型砂型铸模用的一种烧结剂的制作和应用。

• Abstract: One method to make casting sand mold directly from the bozzetto (mud-draft) of the sculpture is introduced.

  文摘：介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

• The characteristics and process of the coated sand mold (core) made by selective laser sintering rapid prototyping are introduced.

  介绍了用选择性激光烧结(SLS)快速成型技术直接制造覆膜砂铸型(芯)的特点及工艺过程。

• The mold hardness under different vacuum degree was tested. The results showed that the mold hardness of EPC process was higher than that of green sand mold and was more uniformly distributed.

  不同真空度下消失模铸型硬度的测试结果表明，消失模铸型的硬度高于普通湿型砂铸型，并且硬度分布更均匀。

• It was pointed out that the strength of molding sand and compactness of sand mold is the key factors influencing the rigidity of green sand mold under normal temperature.

  指出型砂强度和砂型的紧实程度是常温下影响湿砂型刚度的主要因素。

• Further results indicate that the thermal conductivity of sand mold and the high fraction of binder alloying for the low melt point in the block will affect the quality of FGM.

  进一步研究表明，砂型材料的导热率及合金粉块内低熔点的熔合剂过多均会影响复合材料的质量。

• The experience of cast Mg alloy in graphite green sand mold was summarized and its casting characteristics were analyzed.

  总结了采用石墨砂湿型铸造镁合金的经验，分析了镁合金铸造的特点。

• A comparative test between green sand mold casting method and resin sand-coated iron mold casting method was conducted.

  介绍了球铁剎车盘的不同铸造工艺，对粘土砂湿型铸造工艺和覆砂铁型铸造工艺进行了试验对比。

• When wet cannot satisfy the request considers the use clay granulated substance table dry sand mold, the dry sand mold or other sand molds again.

  当湿型不能满足要求时再考虑使用粘土砂表干砂型、干砂型或其它砂型。

• The green sand mold with even density and proof of the impact of liquid metal is one of the critical factors in the production of quality casting.

  紧实度均匀、能抵抗金属液体沖击的合格砂型是保证铸件质量的关键因素之一。

• When wet type can not meet the requirement to consider using clay sand table dry sand, dry sand mold or other.

  当湿型不能满足要求时再考虑使用粘土砂表干砂型、干砂型或其它砂型。

• During this month, I learned lathe work, miller operating, benchwork, digital control processing, sand mold casting, heat treatment, and welding.

  在一个月中，我们学习了车工，铣工，钳工，数控加工，沙型铸造、热处理、焊接等等。

• The additive of correcting metal penetration for green sand mold casting, made from the waste of oil further fabricated——namely DK material, is researched in this paper.

  研制了利用植物油深加工后的废料———DK材料作为铸造用湿型砂防粘砂添加剂。

• The new water-based mold coating for resin-bonded sand mold and core for aluminium castings has been developed.

  为铝铸件树脂砂型芯研制出新型的水基浅色涂料。

• A frame for holding a sand mold in a foundry.

  砂箱铸造车间内保持砂模用的框架。

• The counterweight iron classifies generally according to the modelling method, in the custom divides into the ordinary sand mold counterweight iron and the special counterweight iron.

  配重铁一般按造型方法来分类，习惯上分为普通砂型配重铁和特种配重铁。

• In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment.

  为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。

• One method to make casting sand mold directly from the bozzetto (mud draft) of the sculpture is introduced.

  介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

• Based on analysis of market conventional sand mold cast process has been compared with EPC process of which design and measures for s. g. iron pipes have been introduced as well as key of technology.

  从市场分析入手，对EPC法与传统砂型铸造工艺进行了比较，介绍了EPC法生产球墨铸铁管件的工程设计内容及对策，并提出了工艺设计的关键点。

• Experimental results show that apparent specific heat of sand mold materials is considered as a constant in low temperature range, but it is...

  实验结果表明，砂型材料的表观比热在低温范围内可视为常数，但在高温范围内，砂型材料的表观比热是温度的幂次多项式函数。

• The factors influencing the rigidity of green sand mold during pouring were analyzed.

  对影响湿砂型浇注时的刚度的各种因素进行了分析。