片语

Screw rotation speed螺桿转速

screw rotating speed螺桿转速

screw conveyor speed螺旋输送器速度

screw conveyor speed test螺旋输送器速度试验

Screw rotate speed螺桿转速

screw turning speed螺旋体转速

Screw revolution speed螺桿转速

英汉例句

• rotate, pressure of 4th, pressure of 5th and degree of two-section pressure decrease with material moisture, barrel temperature and screw speed increasing;

  随着加工温度、物料含水量、螺桿转速升高，扭矩、4区压力、5区压力、两区压力差呈大致降低趋势；

• it was employed that changing the processing temperature, screw speed and draw rate in order to study how the processing conditions influence pp/n6 in-situ fibrillation composite.

  分别用不同的加工温度、挤出螺桿转速、牵引速率在单螺桿挤出机中挤出pp／n6（聚丙烯／尼龙6）共混物，得到不同加工条件下的pp／n6原位成纤复合材料。

• by single-index evaluation, it is found that the important order are moisture content, proportion, die temperature, screw speed and die type.

  单指标评价表明，对产品容重影响的顺序是：水分含量、物料配比、加热温度和螺桿转速及模口形状；

• when the resin flow in the mold, the screw speed control and filled with resin after the pressure (pressure protection) control.

  当树脂在模具内流动时，则控制螺桿的移动速度并在填充树脂后用压力（保压力）进行控制。

• by adjusting the screw speed of the twin-screw extruder, temperatures of different heating stages, the optimal processing conditions for grafting reactions are determined.

  通过调整双螺桿挤出机的螺桿转速、不同加热段的温度，确定了接枝反应的最佳工艺条件。

• it was employed that changing the processing temperature, screw speed and draw rate in order to study how pp/pa6 insitu fibrillation composite was affected by the processing conditions.

  在pp／pa6共混物的挤出加工中分别调整加工温度、挤出机螺桿转速、牵引速率，得到不同加工条件下的pp／pa6原位成纤复合材料。

• the increasing of screw speed can improve the pressure of material feeding tube.

  螺桿的转速增加，并能提高料筒中物料的压力。

• if the screw speed of parallel pressure stabilization apparatus is varied corresponding to the pressure fluctuation, the pressure and output fluctuation of extrusion can be fully compensated.

  若调节稳压螺桿的转速，则可完全补偿主螺桿压力和产率的波动。

• this paper reported the producing technology of blending cereal by twin_screw extruder and studied the effects of moisture content, extrusion temperature and screw speed on the gelatinization.

  针对即食方便米饭在贮存过程中易老化的问题，以糊化度为实验指标，研究水分含量、贮存时间、淀粉外支链链长分布对其老化的影响。

• use minimum back pressure and slowest screw speed possible in retracting screw during cooling portion of cycle.

  使用最低螺桿背压和速度最慢回缩循环冷却过程中的一部分螺丝可能。

• the utility model relates to a screw speed regulation full-load type proportion scale, which belongs to a measuring device.

  一种螺旋调速全荷式配料秤，属于计量器具。