片语

seal chamber face runout密封腔端面跳动量

SEAL-FACE SIZE密封面尺寸

al groove seal contact face椭圆槽密封面

Mechanical Seal or Face Seal机械密封

tongue-groove seal contact face榫槽密封面

seal ring face密封环面

oval groove seal contact face椭圆槽密封面

male-female seal contact face凹凸密封面

size of seal contact face密封面尺寸

英汉例句

• The result of transient state analysis indicated the thermal-mechanical effect on seal face during loading, the seal surface parameter dropped steadily during unloading.

  理想瞬态分析实例表明，加载过程中密封端面产生热机效应，稳定减载过程中端面参数平稳下降。

• For motor frame size 180 and above, the inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.

  用于尺寸180以上的电机机架，内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。

• The calculation results show that the pressure distribution shape is a convex parabola and the increase of the radial taper of the seal face can decrease the friction coefficient.

  计算结果表明，机械密封端面压力分布呈凸抛物线状，增加密封端面锥度可降低摩擦系数。

• The seal is processed in the high tech, which makes the hardness of seal face up to HRC57-60. It is endurable in high temperature, resistant in abrasion and antifriction.

  采用高科技手段加工「密封副」，使密封面的硬度高达HRC57 - 60，具有耐高温、耐腐蚀、耐磨损等特性。

• ANSI flange sealing principle is very simple: bolt two seal face mutual extruding flange gaskets and formed the seal.

  ANSI法兰的密封原理极其简单：螺栓的两个密封面相互挤压法兰垫片并形成密封。

• The inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.

  内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。

• Double seals: Material code for the secondary seal is directly followed by the product seal face codes.

  注：双端面机械密封的型号表示方法为：在产品型号规格的后面书写两组材料代号，用横线相连。

• The outer mechanical seal shall be constructed with a solid block silicon carbide rotating seal face and a solid block silicon carbide stationary seal face.

  内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。

• The parametric study demonstrates that substantial hydrostatic pressure can be produced on the seal face with partial micro-pores.

  研究表明在部分密封端面上加工微孔可有效增大端面静压。

• So the means cannot control leak the material, then possibly is the graphite pad or the copper collar wears (for example seal face not to be smooth seriously, gap big).

  如此办法不能控制漏料，则可能是石墨垫或铜环磨损较严重(如密封端面不光滑，间隙大)。

• Mechanical seal type XM31A has a single seal face and multi-spring unbalanced structure, and is driven by screw transmission.

  XM31A型机械密封为单端面、多弹簧非平衡型结构。采用传动螺钉传动。

• Impeller with against pine device, Mechanical seal face material USES silicon carbide - silicon carbide, durable, safe and reliable.

  叶轮具有防松装置，机械密封端面材质采用碳化硅-碳化硅，经久耐用、安全可靠。

• Changes in the spring performance will directly affect the mechanical seal face pressure.

  弹簧性能的发生变化将会直接影响机械密封端面比压。

• Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.

  气门密封面激光熔覆的工艺和性能研究较多，但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。