英语释义

• partly solid; having a rigidity and viscosity intermediate between a solid and a liquid;

  "a semisolid mixture"

片语

semisolid forging半固态模锻

semisolid slurry半固态合金浆料

semisolid state半固态

semisolid waste[环境]

semisolid billets半固态坯料

semisolid metal半固态金属

semisolid oil半固态油

semisolid preparation半固体制剂

Semisolid Sensors半固态式传感器

英汉例句

• If the system is in a solid state at room temperature, the system can be prepared into a self-emulsifying semisolid skeleton capsule after being heated and melted;

  该体系室温时若为固态，可加热熔化后制成自乳 化半固体骨架胶囊；

• The experimental result shows that re can refine the globular grains of semisolid Al-alloy remarkably, improve the roundness and uniformity of globular grains.

  结果发现：稀土显着细化了半固态铝合金的球形晶粒组织，并提高了球形晶粒的圆整度和均匀性。

• The research on the rheological behaviour of the semisolid metal is the fundamental for the understanding and development of the semisolid metal processing technology.

  半固态材料流变特性研究是半固态金属加工技术研究的重要组成部分。

• This paper combines the technology of semisolid forming and micro-forming to discuss the micro-formability of semisolid alloy.

  结合半固态成形技术与微成形技术，探讨半固态金属的微成形性能。

• The microstructure evolution of AZ91D magnesium alloy semisolid slurry in the SIMA process was investigated, and the influencing factors on spherical microstructure evolution were analyzed.

  研究了大体积az91 D镁合金在SIMA法制备半固态浆料过程中组织的演变规律，并对半固态组织球状化演变的影响因素进行了分析。

• Use these technical parameters, carry the semisolid extrusion shaping to the slurry, then test the impact ductility, rigidity and impacting grinding abrasion.

  采用上述工艺参数对浆料进行半固态挤压成形，并对挤压件进行沖击韧性、硬度和沖击磨料磨损测试。

• Al-alloy ZL104 was treated with rare earth, and the effects of re on the structure of semisolid Al-alloy during reheating were investigated.

  采用稀土处理ZL 104铝合金，研究了稀土对铝合金半固态重熔加热过程中组织变化的影响。

• The optimal medium for the growth of lactics was chosen by detecting the number, size of colony and the size of calcium dissolving zone when the bacteria grew in different solid and semisolid medium.

  文中通过检测乳酸菌在不同固体和半固体培养基中的菌落数、菌落大小及溶钙圈大小，以筛选出乳酸菌生长的最佳培养基。

• The influences of semisolid forming on the materials microstructures and properties, and the difference between semisolid forming and solid plasticity forming have been studied.

  研究了半固态加工对材料的组织与性能的影响及与固态塑性成形的区别。

• Microstructural spheroidization of extruded AZ91D magnesium alloys with a high extrusion ratio of 40 was investigated at semisolid state.

  通过液淬法获得挤压比为40的AZ91D镁合金等温处理过程中的半固态组织，研究其球化机制。

• Reheating state and thixotropic behavior of semisolid hypoeutectic Al-Si alloy were investigated by the penetration method.

  采用浸入法研究了半固态亚共晶铝硅合金的二次加热状态及其触变性能。

• The mechanical behavior of 7a04 alloy in the semisolid state has been studied through isothermal compression tests.

  通过半固态等温压缩实验，研究了7a04合金在半固态压缩过程中的力学行为。

• METHODS in vitro methylcellulose semisolid culture was used for the evaluation of clonal formation of K562 cell line. Flow cytometer was used for detecting apoptosis.

  方法体外甲基纤维素半固体培养观察各处理组k 562细胞的克隆形成，流式细胞仪评价细胞的凋亡状况。

• The working principles, control process and the characteristics of main mechanism of plastic bag thermo sealing robot for packaging semisolid margarine.

  介绍了用于奶油包装的塑料袋热封机械手的工作原理、控制过程以及各机构的主要特点。

• Results The emptying of semisolid food from the intrathoracic stomach was much delayed ( P

  结果胸胃对半固体食物的排空明显延迟（P＜0．01）；

• Nutritious semisolid paste plus Charcoal was used to determine the evacuation of stomach simultaneously and the propulsive function of small intestine.

  采用营养性半固体糊加活性炭法同时测定小鼠胃内容物残留率和小肠推进比。

• Influences of casting temperature, casting speed, length and Angle of inclined cooling plate on the stability of semisolid continuous casting for A356 alloy by inclined cooling were studied.

  研究了浇注温度、拉坯速度、倾斜板长度和倾斜角度对倾斜冷却半固态连铸a356铝合金过程稳定性的影响。

• The article has described substance, theoretical basis and applied range of semisolid die forging, and it has introduced some applied examples.

  叙述半固态模锻的实质、理论基础及应用范围，介绍了半固态模锻的应用举例。

• A principle of the magnetic circle designing of rotary magnetic method used in making semisolid slurry with non dendritic structure is analysed by the semi lumped factor method.

  通过磁路半集总参数分析，提出了用旋转永磁体法制备非枝晶组织半固态浆料的磁路设计原则。

• Controlling deformation and flow of semisolid alloy slurry is the key of die casting of semisolid alloy.

  半固态合金挤压工艺的关键是控制半固态合金坯料的流动和变形。

• Comparing the height changes of composites before and after remelt which have been degassed with semisolid compression, the relation between apparent viscosity and reinforcement diameter was obtained.

  通过比较半固态加压除气的试样在重熔前后的高度变化，建立了增强颗粒粒径与复合材料熔体表观粘度间的关系。