片语

sequence of control控制程序

sequence program control method顺序型机器人

Sequence logic control顺序逻辑控制

time sequence logical control时序逻辑控制

Sequence Function Control管理与下位机顺序控制

sequence program control顺序程控

sequence e control counter程序控制计数器

sequence-control design顺序控制设计法

英汉例句

• i/o connection of special sequence control function block, output monitor function and detail specification of 16- valve monitor block are also expounded.

  对特殊运用的顺序控制功能块的i/o连接、输出监视功能和16位阀位监视功能块详细定义均进行了明确的阐述。

• according to the work characteristic of this manipulator, stepping sequence control is adopted so as to simplify program.

  根据该机械手的工作特点，采用步进顺序控制方式，使程序简化，便于调试。

• we put emphasis upon systemic hardware design, discuss the sequence control of cpld, register control of image sensor, and hardware exploiture, software realization, empirical analysis of dsps, etc.

  并着重研究了系统的硬件设计，讨论了cpld的时序控制、图像传感器的寄存器控制以及dsp芯片的硬件开发、软件实现、实验分析等等。

• using dcs sequence control chart, it realized the autocontrol of multi device and inside programming. it optimized techniques process, improved the automatization level of this working procedure.

  使用dcs顺序控制图，通过模块组态和内部编程，实现多台设备的自动控制，优化工艺过程，提高该工序的自动化水平。

• the sequence control circuit of data collection is designed with finite state machine(fsm) of vhdl.

  用vhdl（甚高速集成电路硬件描述语言）有限状态机设计了数据采集时序的控制电路。

• on the basis of general design method of sequence control system, by the funtion of the plc or microcontroller, the paper advances a new design method, which possesses superfluous state memories.

  在顺序控制系统设计一般方法的基础上，根据使用单片机及plc作为控制器的特点，提出了设置冗余记忆状态的断续控制系统设计法。

• the catalyst auto-continuous addition was realized by using the centum sequence control function.

  利用centum集散控制系统的顺序控制功能，即可实现催化剂自动连续补加。

• through simulation of sequence control system, free conversion of hydroelectric unit「s operating mode and trouble-free operation of whole control flow are realized.

  通过对顺序控制系统的仿真，实现了水电机组工况自由转换和整个控制流程的顺畅执行。

• the system designing idea, the system structure, the control method and the realizing way of copper anode platequantitative casting and casting operation sequence control are introduced.

  本文介绍了铜阳极板定量浇铸和浇铸作业顺序控制系统的设计思想、控制系统结构、控制方式及其实现方法。

• the advantage function in plc is stepping sequence control, the efficiency method of establishment the stepping sequence control program is drawing out the function diagram.

  步进顺序控制是可编程序控制器的优势功能，编制步进顺序控制程序的有效方法是画出功能表图。

• describes a new design of pulse frequency dividers in which timers ne556 and sequence control unijunction transistors are used.

  利用定时器ne556和程控单结晶体管，设计了一种新型多路脉沖分配器。

• the unit lcu and public local control unit are composed of plc supplied by ge company and the industrial control computer ipc_486 having a sequence control function.

  机组现地控制单元和公共现地控制单元由ge公司的plc和具有顺控功能的工业控制计算机ipc—486构成。

• mp2000 machine controllers synchronize sequence control and motion control in one tightly integrated platform.

  mp2000机械控制器可在一个紧凑完整的平台上实现次序控制和运动控制同步进行。

• a new way is developed to realize the sequence control for built-in pmc.

  研究一种实现内装型可编程机床控制器（pmc）顺序控制功能的新方法。

• finally, it also introduces electrohydraulic sequence control implemented by using pc.

  本文最后还介绍了使用pc实现的电液顺序控制。

• it contrapose discusses hardware deploy and software programming based on the sequence control characteristic in tube end expanding machine and plc」s hardware deploy and software function.

  根据扩口成型机顺序控制的特点以及plc及其组件齐全的硬件配置和软件功能，有针对性地具体研究扩口成型机的硬件配置和软件编制。

• according to the processing ask characteristic of workpiece, with stepping sequence control and master control program, make the 3 kinds of control way of machine tool facilitate realization.

  根据工件的加工要求特点，采用步进顺序程序及主控程序控制，使机床的三种控制方式能方便实现。

• according to the work characteristic of the manipulator, stepping sequence control is adopted so as to simplify program.

  根据该机械手的工作特点，采用步进顺序控制方式，使程序简化，便于调试。

• for connector, we need to describe the sequence control logic of interactive events by process notation;

  对于连接子部分，还需要用进程符号来描述交互事件的时序控制逻辑；

• adapting control applied in the sequence control of the lock hopper makes that the result and precision of lock hoppers control achieved great improvement.

  在闭锁料斗的顺序控制中引入自适应控制后，其控制效果与精度得到非常显着的提高。

• deep into research about sequence control theory, and design the automation load control system with sequence control strategy and give out the whole design scheme.

  研究顺序控制技术，应用顺序控制策略对自动负荷升降系统进行设计，给出自动负荷升降系统的总体设计方案。

• the sequence control switches of batch controller are used to start, reset and stop thd batch sequence.

  批处理控制器的程序控制开关用于启动，复位及停止批程序。