the effect factors on the signal output of ccd image sensor are analyzed.
分析比较了影响ccd图像传感器信号输出幅度的因素;
this module is made up of the parameter acquisition circuits, the pwm signal output circuits, man-machine interface circuits and the communication circuits.
该模块主要由参数采集、pwm信号输出、人机接口以及通信四部分组成。
otherwise, the algorithm adopts the way of soft-decision, then the signal output is the format of maximum-likelihood, it reduces signal error transmitting.
另外,采用软判决的方式,使得信号的输出形式以最大似然的形式输出,减少了信号的差错传播。
the hardware adopted in the system include industrial pc, signal input devices and signal output devices.
系统中采用的硬件主要有:工业控制计算机,信号采集设备和信号输出设备。
the signal output (or input) is available through binding posts or a mini-thermocouple connector.
可通过连接柱或者是一个迷你型热电偶连接器进行信号输出(或输入)。
because the sensor has multi-routes signal output and finally also measure circuit of signal adding together, the research designed and adopted circuit of signal adding composed of 74ls02.
由于此传感器有多路信号输出,且最后要将信号叠加在一起进行测量,本研究设计并采用了由74ls02组成的信号叠加电路;
in the dac7715 (d/a chip) process, work efficiency of signal output and dsps process is corresponded and improved with tinier interrupts.
针对d/a芯片dac7715的工作过程,运用定时器中断的方法,协调并提高信号输出和数据处理的工作效率;
if resonant elements are adopted in mems accelerometer, the quality of the signal output can be improved, and therefore the detection will be easier.
将谐振原理应用于硅微机械加速度计中,可以改善后者输出信号的质量,降低检测难度。
it includes signal output gauge and pressure reducing valve.
包括信号输出压力表和减压阀。
the above mentioned problems, and sometimes appear in the video signal output and distribution.
上述谈及的问题,有时也会出现在视频信号的输出和分配上。
this paper describes the hardware and software design of temperature control signal output channel based on 8098's hso in the temperature control system of scr power regulating.
介绍在晶闸管调功温控系统中,采用8098单片机的高速输出通道(hso)作为温控信号输出通道的硬件和软件设计。
sht11 digital temperature and humidity sensor is a calibrated digital signal output of the temperature and humidity combined sensor.
sht11数字温湿度传感器是一款含有已校準数字信号输出的温湿度复合传感器。
two very pithy and powerful analytical expressions for saturated signal gain and signal output power of fiber optical parametric amplifiers are educed with numerical analysis.
通过数值分析的方法推导出光纤参量放大饱和信号增益和信号输出功率的数学表达式。
pre, rec signal output for connecting the amplifier expediently and expand the sound field processing.
rec信号输出,方便外加扩大器,扩大音场处理。
purpose: large signal output amplifier.
用途:用于大信号输出放大。
the relation of magnetic induction and the signal output is linear under low magnetic field through analyzing data.
对数据进行分析可知,在外加磁场较小的时候,磁感应强度与信号输出呈线性关系。
at the same time, the analytical expression for saturated signal output power is worked out as well.
同样也得出了饱和信号输出功率的表达式。