英语释义

1. to avoid work or school by staying away or by leaving without permission
… 71 per cent said rewards for good ideas and punctuality would make them work harder and not skive …
— South Wales Evening Post Tam is 15 and he's skiving school.
— Julie Mccaffrey —often used with off
I once worked in a hospital garden where my workmate skived off every day with "backache" and disappeared to work on his car at home.
— Louis De Bernières

2. to cut off (a material, such as leather or rubber) in thin layers or pieces pare

片语

EXTERNAL SKIVING外剥胶

skiving machine削皮机；剖革机；切片机

Skiving Process削皮

upper skiving帮面件片边

skiving mveryine削皮机

toe skiving磨鞋头

skiving Fin铲削

skiving force刮削力

skiving machining削皮机；剖革机；切片机

skiving wheel润面铣刀

英汉例句

• basic knowledge of stitching, skiving , and cutting machine maintenance.

  针车、削边机、裁断机等制鞋设备的维修基本知识。

• for operation security and machine durability, this skiving machine is designed to be made of quality parts and components.

  本机在设计中充分考虑到操作的安全性和耐久性。

• well, your mama is a little exaggerated. two days and two nights, pain is a sharp knife, skiving me into pieces, but i couldn「t tell where it is!

  呵呵，也许妈妈有点太夸张了，不过两天两夜的疼痛，像把锋利的刀子，快要把我切成碎片，可又无法说清楚到底痛来自哪里！

• this paper analyzes the requirement of equpment, tool and workpieces for hard surface gear skiving machining and cutting amount selection and introduces its economic benefits and application range.

  分析了硬齿面刮削加工对设备、刀具和工件的要求，切削用量的选择，并介绍了它的经济效益及适用范围。

• it is widely available in skiving all kinds of leather, synthetic leather, rubber, etc.

  广泛适用于各种皮革、人造革、橡皮等材质的边缘削薄及平面削薄。

• optimal technics parameter fit in lotus green granitic stone is found by the study on skiving fine milling and polishing of lotus green granitic stone.

  通过对芙蓉绿花岗石石材细磨、精磨、抛光的实验研究，找出了适合于芙蓉绿花岗石石材加工的最佳工艺参数（压力、给水量、时间等）。

• spiral bevel gears carbide skiving cutter has designed by method of inclination cut and straight line profile, and the generating surface of cutter is hyperbolic but conic.

  根据斜角直线齿形造形方法设计出的弧齿锥齿轮刮削刀盘产形面已不再是一个圆锥面，而是一个双曲面。

• it is suitable for repairing and skiving all kinds of shoe vamps and the inner cases.

  适用于各类鞋面及箱包内里的修削。

• it can be used for skiving edges and skiving thinner of surfaces of shoes, leather shoes, handbags and gloves which made of fur leather and rubber.

  适用于各种皮革及橡胶类所制成的鞋、皮鞋、手袋、手套等边缘及表面削薄。

• the authors recount (with grudging admiration) how nurses in rural rajasthan outwitted the two professors’ efforts to stop them skiving off work.

  作者列举了一个实例（带着不那么情愿的钦佩）---拉贾斯坦邦的护士如何和这两位教授斗智斗勇最后成功翘班。

• the profiling error of a new type skiving hob with convex curved rake face is analyzed and the change law of profiling error affected by parameters is expounded.

  对新型凸曲前刀面刮削滚刀的理论构形误差进行了全面分析，探讨了各特征参数对构形误差的影响规律。

• the manufacturer of the hose and couplings must specify the skiving length and diameter required.

  软管和连轴器的生产厂商必须使产品符合要求的长度和直径。

• a bcc spokesman said: 「we haven」t seen any evidence of employees skiving en masse because of swine flu.」

  一位bbc发言人称：「我们还没有看到员工因为甲型流感而集体旷工的证据。」

• bcc spokesman said: 「we haven「t seen any evidence of employees skiving en masse because of swine flu.」

  他呼吁雇主，不要仅仅因为感染率在近几周出现下降，而放松了对甲型流感的警惕。

• i can」t find martin anywhere in the office, he must be skiving .

  我在办公室里哪儿也找不到马丁，他一定在偷懒。

• because the profile of skiving cutter with plane flank for gleason gear is a straight line with an angle λ, the tolerance of the designed profile and the tolerance of the reshaped profile are great.

  采用尖齿刮削刀盘对弧齿锥齿轮硬齿面进行刮削加工时，刀盘切削刃采用斜角直线造形法，切削刃较大刀具造形误差和重磨误差较大。

• for internal skiving, insert the mandrel into edge rod support hole, adjust the mandrel position by turn the nut as skiving length and fixed by bolt.

  剥内胶时，将芯棒插入刀桿架的孔中，根据剥外胶长度的长短要求旋动芯棒后部的螺母至合适距离，然后将锁紧螺栓锁紧到芯棒插入部分的平面上。

• it is shown that in comparison with grinding, skiving will make gears have a more satisfactory status of residual stress.

  研究表明：与磨削相比，刮削可使齿轮呈现满意的残余应力状态；

• the functional relation of the residual stresses and the skiving power and force can be applied to monitor the residual stresses pattern of automotive gears during the skiving process.

  刮削残余应力与刮削功率及切削力之间的函数关系，可用作汽车齿轮制造中监测刮削残余应力状态的参考依据。