片语

slab continuous caster mould板坯连铸机结晶器

steel slab continuous caster中薄板坯连铸机

heavy slab continuous caster厚板坯连铸机

thin slab continues caster薄板坯连铸连轧

slab continuous caster板坯连铸机

slab casting machine板坯连铸机

thin slab continuous caster mold薄板坯连铸结晶器

wide slab caster宽板坯连铸

英汉例句

• this world widest slab caster with long funnel mould has produced prime quality products since the first heat and continues to break productivity record.

  工厂的连铸机是世界上最宽的长漏斗形结晶器板坯连铸机，能够生产优质合格的产品并连续不断地打破了产能纪录。

• analysis of the tracking problems with the dummy bar in slab caster and solutions to them;

  介绍了一种板坯连铸机的链式引锭桿的存放装置，并对其基本原理、结构特点进行了分析和说明。

• based on the slab caster operation the surface of the roller is divided into three zones, they are: heat conduction zone, convection zone and the radiation convection zone.

  根据连铸机辊子的实际工作情况，将其内外表面分成传导传热区、对流换热区和辐射—对流综合换热区。

• using the general static simulation software of slab continuous casting process, ccps offline, the secondary cooling system of no. 4 slab caster in a steel plant has been numerically simulated.

  应用通用的板坯连铸浇注过程静态仿真软件c cpsoffli ne，对某钢厂板坯连铸机的二次冷却系统进行了数值仿真。

• critical areas of wide slab caster design will be examined including mould steel flow conditions, mould design, strand guide support design, secondary spray cooling design and caster automation.

  宽板坯连铸设计的关键在于结晶器内的注流状况，结晶器、铸坯导向段的支撑和二冷喷淋的设计以及连铸自动化。

• thirdly, based on the slab caster equipped with hydraulic oscillators the transient detecting model of mould friction is researched and built, and the detection results of mould friction are analyzed.

  第三，基于液压振动装置驱动的板坯连铸机，研究和建立结晶器摩擦力的瞬态检测模型，并对摩擦力的检测结果进行分析；

• the control system of thick slab caster of laiwu steel group was presented. the structure and function of the level one and level two control system were discussed in detail.

  本文介绍了莱钢宽厚板坯连铸机的控制系统，并对其一级、二级控制系统的构成及功能进行了较详细的论述。

• the combined long funnel shape h2(high speed & high quality)straight mould was adopted for bensteel thin slab caster production line.

  本钢薄板坯连铸生产线采用了组合式长漏斗形h2（高拉速、高质量）直结晶器。

• the slab caster and technology were designed based on metallurgical properties and final applications of stainless steel. the technology was modified during hot commissioning and mass production.

  针对不锈钢冶金特性和最终用途特点设计了板坯连铸工艺装备和工艺参数，在热调试和生产过程中不断调整连铸工艺，目的在于改善板坯表面质量。

• successful application of oil-air lubrication for segment bearings in slab caster and the principle of application were introduced.

  主要介绍了油气润滑系统的应用原则以及在板坯连铸机扇形段轴承上的成功应用。

• 2 slab caster of meishan steel, the influence of casting speed, immersion depth of nozzle and blowing argon flowrate on bubble distribution in the mold was investigated by using water model.

  以宝钢一连铸板坯结晶器为研究对象，采用多相流模型计算了吹氩后结晶器内钢液的流场、温度场及氩气分布。

• the slab caster machine head is the most decisive caster section which has an influence on the surface quality of the cast strand.

  板坯连铸机机头是对铸坯表面质量有决定性影响的因素。

• a video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the embr.

  本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。

• the computer system of continuous slab caster in anshan iron and steel complex is imported from japanese kobe steel ltd.

  鞍钢大板坯连铸机计算机应用系统是从日本神户制钢引进的。

• this paper mainly introduces the mould breakout detection system function arithmetic of thin slab caster in tang steel.

  本文主要介绍了唐钢薄板坯连铸机结晶器漏钢预报系统的功能算法。

• the present paper analysed process and casting condition of low carbon steel for thin slab caster of bengang.

  对本钢薄板坯连铸机低碳钢的生产从浇注工艺方面进行分析。

• the thin slab caster mould is normally composed of several simple geometric curved surface, where the strand shell bearings the considerable uneven deformation during the movement from top to bottom.

  薄板坯连铸机结晶器内腔宽面通常由若干简单几何曲面拼接而成，使铸坯坯壳在结晶器内自上而下移动过程中承受较大的非均匀变形，从而在铸坯坯壳内产生「弯」、「扭」、「剪」应力。

• mould oscillation installed on the slab caster at florange is very flexible.

  弗洛朗热钢铁厂板坯连铸机上安装的结晶器振动装置灵活可靠。

• jisco has the international first-class slab caster from vai, so it is necessary to research and design the control system of the crystallizer width adjust.

  根据酒钢目前采用的国际一流的奥地利vai公司的板坯连铸机，对连铸关键技术结晶器自动调宽控制系统进行研究和设计，具有十分重要的现实意义。

• based on analyses on existing vai slab caster, some updating and optimizing measures for automatic test system of the slab caster were put forward to perfect and extend the function of it.

  通过对现有板坯连铸机系统的技术消化与吸收，提出了对连铸机各自动化检测系统的升级及优化措施，对现有连铸机系统的功能进行完善及扩展。

• the paper presents the principle, installation and effect of a slab caster with three secondary cold air blowers which uses a set of type dwr-1 soft start equipment with three dragged by one.

  介绍了板坯连铸机三台二冷风机共用一台dwr-1型一拖三软起动设备的原理、安装及其使用效果。

• sollac has successfully operated the modernized two-strand slab caster since it was started up on november 11, 1998 at its fos sur mer plant.

  自从1998年11月11日开机以来，sollac已经成功的保证了现代化的两流板坯连铸机稳定生产。

• the article introduces the characteristics of medium thin slab caster, and the main technologies which medium thin slab caster used.

  本文介绍了中薄板坯连铸机的设备性能特点所采用的关键技术。

• the reasons of breakout in no. 1 slab caster at steelmaking plant of shanxi new lin-gang iron & steel co. ltd. were analyzed, and the preventive measures were put forward.

  分析总结了山西新临钢钢铁有限公司炼钢厂1号板坯连铸机漏钢的影响因素，并提出了相应的防止措施。