片语

optimal slip ratio identification最优滑转率估计

maximum slip ratio最大滑移比

true slip ratio真实滑脱比

slip-ratio self-tuning滑移率自调节

handrail slip ratio扶手滑差率

optimal target slip ratio优化目标滑移率

effective slip ratio有效滑流比

characteristic slip ratio特征转差率

英汉例句

• The slip ratio corrector equipment can adjust the anticipant slip ratio according to the running state of system, which improves the stability of the control system.

  滑移率校正器根据系统运动状态自动调节系统的期望滑移率，提高了控制系统的稳定性。

• The three closed loop strategy with slip ratio loop as the outer one, pressure loop as the middle one and current loop as the inner one is used.

  系统采用以滑移率环为外环、压力环为中间环和电流环为内环的三闭环控制策略。

• For the sake of the tyre works under optimal slip ratio, a braking variable structure control (VSC) law based on slip ratio control was introduced so as to obtain the maximum friction coefficient.

  飞机防滑剎车控制的关键是控制机轮的滑移率，为了使机轮工作在最佳滑移率，得到最大结合系数，提出了一种基于滑移率控制的防滑剎车变结构控制律。

• The land wheel has simple structure, low rotating slip ratio of driving operation and reliable driving, and has the function of automatically removing soil without sticking soil.

  本地轮结构简单，驱动作业转动打滑率低，驱动可靠，且具有自动清除泥土功能，不粘土。

• On the basis of analysis of block diagram of AC speed driver system with speed and slip ratio double closed loops, a system design method is presented with the four quadrants experiment results.

  在分析转速、转差双闭环交流调速系统动态结构图的基础上，提出了系统的设计方法，并给出了四象限运行实验结果。

• In hardware designing, TMS320F2812 and its peripheral circuit make up the velocity capturing circuit. Anti-skid controller controls slip ratio error and exports braking pressure signal.

  在硬件电路设计上，防滑控制器采用TMS320F 2812和外围电路构成速度捕获电路，完成滑移率偏差的控制并输出剎车压力信号。

• The test results show that the control algorithm can effectively improve the stability of the vehicle, and the slip ratio is better and is controlled near the optimal value of 0.2.

  测试结果表明：该控制算法能有效提高汽车稳定性，使滑移率较好地控制在最佳值0.2附近，具有更好的鲁棒性和自适应能力。

• The prerequisite of realizing slip ratio based anti-lock braking system (ABS) is the accurate measurement of vehicle speed.

  实现基于滑移率控制的汽车防抱制动系统的前提是车速的準确测量。

• The inputs of fuzzy controller are the error of slip ratio and its change ratio, the output of fuzzy controller is the control current of the servo valve.

  模糊控制的输入变量为滑移率误差和误差的变化率，输出变量为伺服阀的电流。

• The precondition of realizing slip ratio based on Anti-lock Braking System(ABS) is the accuracy measurement of vehicle velocity.

  实现基于滑移率控制的汽车防抱制动系统的前提是车速的準确测量。

• Based on the tire magic formula model, the dynamic variation process of the tire optimal slip ratio and the maximum friction coefficient on the road with the vehicle velocity is researched.

  基于轮胎的魔术公式模型，研究了轮胎在路面的最佳滑移率和最大摩擦系数随汽车速度的动态变化过程。

• The anti-lock brake principle, regulating braking pressure output properties in accordance with condition of road surface so as to control the wheel slip ratio in idea scope, is put forward.

  提出了针对路面条件通过控制器调节制动压力输出特性使车轮滑移率处于理想的范围，以实现防抱死制动的原理。

• Finally choose reduce wheel speed, acceleration and slip ratio control parameters of logic threshold for control methods, as the paper design of the ABS controller control methods.

  最后选择以车轮减速度、加速度及滑移率为控制参数的逻辑门限预测控制方法作为本论文设计abs控制器的控制方法。