the using method of the suture mainly lies in the temperature control: before the suturing, the suture is heated to softening temperature and then stretched to suture the wound;
所述的缝合线的使用方法主要在于温度的控制:缝合前,将其加热至软化温度,进行拉伸后缝合伤口;
influences of content of epoxy resin e51 on mechanical properties and vicat softening temperature of pvc/e51 alloys were studied.
采用模压法制备了pvc/环氧树脂e51合金,研究了环氧树脂e51用量对合金力学性能及维卡软化温度的影响。
in this paper, through orthogonal experiments, the effect of processing parameters on vicat softening temperature and mechanical properties of the pvc alloy have been studied.
本文用正交试验研究了加工工艺参数对pvc合金维卡软化温度和力学性能的影响。
fumaric acid has a lower softening temperature and saponification value but a higher acid value, which was beneficial to improving the quality of modified rosin size and dispersed rosin size.
在加成量相同的情况下:富马松香与马来松香相比具有较低的软化点和皂化值,却有较高的酸值,有利于改善强化松香胶和分散松香胶的质量。
samples of blended coal ash were taken from the boiler of a power plant 700mw unit. their softening temperature was measured by a pyramid method on an intelligent ash-melting point measuring device.
从某电厂700 mw机组锅炉取混煤灰样,在智能灰熔点测定仪上采用角锥法对其进行软化温度测定。
this paper systematically studies the effect of low softening temperature transparent glass frits composition on phosphorescence properties of photoluminescence glaze;
本文系统地研究了低温软化透明釉料组成对光致发光釉发光性能的影响;
the results showed that the vicat softening temperature , the tensile yield strength and melt viscosity of the blends were improved with increasement of cpvc content.
结果表明:共混物的维卡软化温度、拉伸屈服强度和熔体粘度随cpvc用量的增加而明显增加;
results also show that a trace of rare earth elements can greatly improve conductivity and softening temperature of the alloy in the c…
加入微量稀土 ,可以使合金在硬度略有升高的同时 ,导电率和软化温度显着升高 ,较大地提高合金制件的使用寿命。
through the use of a radial-based function neural network(rbfnn) an intelligent forecasting model for the blended-coal softening temperature was set up under matlab environment.
采用径向基神经网络(rbfnn)在matlab环境下建立了混煤软化温度的智能预测模型。
the best peak firing temperature was existed, which was between the softening temperature and the peak crystallization temperature, and near the incipient crystallization temperature of the glass.
电阻浆料存在最佳峰值烧成温度。 理论分析表明,最佳峰值烧成温度应在软化点与峰值析晶温度之间,靠近起始析晶温度。
the use of tris(2-hydroxyethyl) isocyanurate leads to an increase in the softening temperature of the enamel film obtained.
采用三羟乙基异氰尿酸酯可以使获得的漆膜软化温度升高。
the cooling step cools the thermoplastic material to a temperature smaller than the softening temperature of the thermoplastic material.
将该融熔的热塑性材料冷却至低于热塑性材料软化温度的温度;
the result showed that the tensile strength property and vicat softening temperature was increased and notched impact property of pvc/abs composite was decreased with the glass fiber added.
研究结果表明:随着玻璃纤维添加份数的增加,pvc/abs合金的拉伸性能和维卡软化温度有不同程度的提高,缺口沖击强度有所下降。