片语

spray oil cooling喷油冷却

water spray evaporative cooling喷雾蒸发冷却

spray type cooling喷淋式冷却

free-spray type cooling device自由喷射式冷却机构

spray filled cooling tower喷雾式冷却塔

spray-cooling mold喷淋结晶器

inter-stand spray water cooling机架间喷水冷却

spray pond cooling喷淋池冷却

英汉例句

• effects of surface-to-nozzle distance and high-temperature plate's surface temperature on spray cooling heat transfer coefficient;

  研究了高温金属面上覆盖砂层后的喷雾冷却换热特性，测试了砂粒颗粒大小和砂层厚度对换热特性的影响。

• firstly, the spray cooling temperature field for h-beam was simulated. then different cooling rates were adopted for edge and waist parts of the beams according to the simulated results.

  首先模拟h型钢喷水冷却时的温度场，根据模拟结果对h型钢的边部和腰部采用不同的冷却强度进行在线余热淬火。

• spray cooling is an efficient method for high heat flux removal.

  喷雾冷却是一种高效的高热流密度散热方式。

• flow and heat transfer of spray cooling can be reflected by a droplet spreading coefficient, which is dependent on the droplet initial size and velocity.

  喷雾冷却中液滴沖击壁面的流动和换热强弱可用铺展系数和冷却效能的大小来反映。

• water spray cooling of the high temperature plat plate was presented by using finite element coupling numerical simulation.

  利用有限元耦合场数值模拟计算方法进行了高温平板纯水喷雾冷却的模拟。

• the spray cooling facilities in the expo park to keep the visitors cool.

  上海世博园内的雾喷降温区为游客提供清爽体验。

• to this question, this study paper is to do air temperature accumulation and spray cooling in chongming tunnel.

  针对这一问题，本文对隧道内空气累积温升进行深入的研究，并提出在隧道内采用喷雾降温。

• cryogen spray cooling is an effective cooling technique used for laser treatment of port wine stain.

  制冷剂喷雾冷却是激光治疗鲜红斑痣手术的重要辅助手段。

• on this basis, the key completed tank foam fire extinguishing system design and area oil spray cooling system design area.

  在此基础上，重点解决了油罐区泡沫灭火系统设计和油罐区喷淋冷却系统设计。

• the metallurgical parameters of the conventional recirculating water cooling and the spray cooling molds have been calculated respectively.

  并数值计算了普通循环水冷结晶器与喷淋冷却结晶器的冶金参数。

• critical areas of wide slab caster design will be examined including mould steel flow conditions, mould design, strand guide support design, secondary spray cooling design and caster automation.

  宽板坯连铸设计的关键在于结晶器内的注流状况，结晶器、铸坯导向段的支撑和二冷喷淋的设计以及连铸自动化。

• a spray cooling system is thus set up for simulation in lab to test the step signal from the conventional, integral separated and fuzzy self-adaptive pid controllers and the simulated casting.

  因此，设立一个喷雾冷却系统模拟实验室测试的阶跃信号的传统，积分分离模糊自适应pid控制器和模拟铸造。

• based on an understanding of the solidification features of slabs in moulds, the mathematical model of heat transfer of the spray cooling mold has been proposed.

  针对铸坯在结晶器内的凝固特性，建立了喷淋冷却结晶器的传热数学模型。

• using these experimental results, heat transfer performance in spray cooling can be optimized.

  根据以上实验结果可以最优化喷雾冷却性能。

• in cutting principle and actual application, the spray cooling has better effect in cooling and has value to generalize.

  从冷却原理及实际应用效果两方面都说明，喷雾冷却具有较好的切削区冷却作用和推广价值。

• with the heat transfer experimental results of the spray cooling, the relationship between the thickness of the liquid film and spray cooling situations was discussed.

  结合对流传热系数测量，分析了液膜厚度与雾化喷射冷却条件及效果的关系。

• traditionally, the mathematical model for the specifications and optimization of spray cooling in continuous casting of steel is based on the effective conductivity model.

  通常制定和优化二冷制度的数学模型基础是有效导热凝固模型。

• spray cooling tank is designed with optimized spraying positioning and piping, which guarantees the strength of the large diameter pipe and quick cooling.

  喷淋箱采用优化的喷水定位和优化管路设计，保证大口径管材强力和均匀的快速冷却。

• in view of the phenomena that uniform spray cooling brings about uneven deformation when quenching medium steel plates, the non uniform jet compensation technique was presented.

  针对中厚板淬火过程中均匀喷水时造成钢板变形的现象，提出了非均匀喷水的补偿方法。

• spray cooling is an efficient cooling techniques, which offers the ability to remove high heat fluxes, and provides uniform device temperatures.

  喷雾相变冷却是一种高效的冷却技术，具有高热流密度的冷却能力和严格的温度控制能力。

• essentials in design and development of instrument and automatization in this set of spray cooling system are introduced …

  根据本人的设计经历，简要介绍这套喷雾冷却系统中仪表和自动化方面的设计开发要点。

• in this paper, with high speed camera, the visualization experiments for the heat transfer characteristics of spray cooling on rectangle capillary microgroove groups surface were carried out.

  本文利用高速摄影仪对具有矩形毛细微槽群结构的加热表面进行喷雾冷却的传热特性进行了可视化实验研究。

• a centralized spray cooling system for farm buildings was developed and tested under a practical production condition in summer.

  研究开发了一种用于农业建筑的集中雾化蒸发降温系统，进行了实际生产条件下的夏季降温试验。

• the utility model can spray cooling liquid into the vortex compressor in the process of the operation of the vortex compressor, the reliability and the efficiency of the compressor can be improved.

  本实用新型可以实现在涡旋压缩机工作的过程中，向涡旋压缩机中喷入冷却液，提高压缩机的可靠性和效率。